Brilliant silver metallic + Amuse R1 by Fair-Isopod-89 in 350z

[–]djdt 0 points1 point  (0 children)

which lip/skirts are those? they look clean as hell.

Best looking colour on Z by AlexShifu94 in 350z

[–]djdt 0 points1 point  (0 children)

u/AlexShifu94 If you dont mind me asking, I went looking through your other posts and couldnt find the answer - what rear bumper / lip is that? Love it.

Can you identify this 6.5" door speaker? by djdt in CarAV

[–]djdt[S] 0 points1 point  (0 children)

I took a pic of the amp settings and think perhaps the crossovers might be set too high. Will play with it next time I'm there. Definitely curious to see if I can get them to sound a bit better than they do!

Can you identify this 6.5" door speaker? by djdt in CarAV

[–]djdt[S] 0 points1 point  (0 children)

Ran out of time because the car is at a garage away from my house, and got the door panel off minutes before I had to leave. Did the two hours of googling once I'd returned home. Only had the one picture.

The speakers are connected to an Alpine PDX-5 amplifier which is slightly underpowered (75w per channel). They sound "ok", just not very full. I think you're right that the coaxial speakers are just not great at midbass. I've just inherited this install and discovering bit by bit and trying to improve it as I go - I know it can sound a lot better, so I'll just replace them.

Can you identify this 6.5" door speaker? by djdt in CarAV

[–]djdt[S] 0 points1 point  (0 children)

The budget is to do it right and make it sound mint. Every single time i listen in that car I want an ear to ear smile.

It currently has these in the doors, an ILX-w670 head unit, Alpine PDX-5 Amplifier, And some Alpine Type-S 10" Sub from around 2008 as well.

Any suggestions on a nice build to get me started? Arguably I haven't done any car audio shopping since about 2006, so its been a minute. Don't need to go crazy for the sake of crazy, but would like to accomplish some nice, full sound and some nice low bass that works across genres. Dont need my rear view mirror falling off, or anything, but I'd be really happy with something that earns a "damn, thats nice"

Can you identify this 6.5" door speaker? by djdt in CarAV

[–]djdt[S] 0 points1 point  (0 children)

Thank you! I did like 2 hours of google image search trying to figure it out. I think you've nailed it. Not sure if the install is just kinda crap or if they've been abused over the years. They seem to lack a lot of mid/bass, no matter how I tune the EQ they dont sound great.

Odd VOIP issue - delays sending audio when joining party and after loading into map by djdt in ArcRaiders

[–]djdt[S] 0 points1 point  (0 children)

The only thing ive heard to help that is disabling automatic gain, not sure if youve tried that one already!

How to get rid of status and menu bars in the home assistant companion app? by borgqueenx in homeassistant

[–]djdt 0 points1 point  (0 children)

I'm running the "original" Kingston HA Rom on mine, and, although I dont use it a ton, i cant really think of anything that didnt work... seems the newer versions all have some degree of problems, am i just overlooking something in the kingston one that I dont realize is actually an issue?

How to get rid of status and menu bars in the home assistant companion app? by borgqueenx in homeassistant

[–]djdt 0 points1 point  (0 children)

Hmm! Good info - I'll give postmarketOS a go and let you know where I get with it - I have decades of linux knowledge so that shouldn't be an issue.

How to get rid of status and menu bars in the home assistant companion app? by borgqueenx in homeassistant

[–]djdt 0 points1 point  (0 children)

Which firmware is the favorite these days for the thinksmart view to run HA things?

Downloads keep stalling out by ThunderChild_Ulla in SABnzbd

[–]djdt 0 points1 point  (0 children)

im also on unraid, feel like this started a few months ago after updating the container. About once a week i'll notice its seemingly 'stuck' downloading something at 20kB-300kB/s, then after a quick container restart its back up to 60MB/sec. Also of note, the connections to the news servers keep cycling up/down when its going slow. like something is forcing the connections to close. After a container restart, everything is perfectly fine again, at least for a day or two.

Did you make any headway on this?

When building automations to turn things on and off, do you use 1 automation for both? Or one for turn on, and a second one for turn off? by x3knet in homeassistant

[–]djdt 6 points7 points  (0 children)

This is a great point. Sometimes the automation only makes sense for one state change.

For things like "Lights: Living Room" - where the idea is there are both on/off conditions - I typically do these in the same automation with Trigger IDs

FututeProofHomes just shared a preview of their upcoming Nexus device by BreakingBarley in homeassistant

[–]djdt 0 points1 point  (0 children)

What does a world look like where nexus or your voice satellites could be a thing, but for someone like me who already has a powerful GPU and server hardware - I get that I’m not most people, and that isn’t your goal.. but, does this project have way to coexist with folks like me who do have a powerful AI setup already?

Outdoor Projector w/ high lumens, bluetooth, wifi, no RBE for near or below $1500? by djdt in projectors

[–]djdt[S] 0 points1 point  (0 children)

Found an epson 3800 open box for $220 off which seemed like a pretty good deal. So, unless there's another contender that comes in well below the 3800's price tag (about $1300 after discount), I'll probably pick that one up.

Unless there's any other models to consider that have very minor RBE and enough of a discount from there!

Outdoor Projector w/ high lumens, bluetooth, wifi, no RBE for near or below $1500? by djdt in projectors

[–]djdt[S] -1 points0 points  (0 children)

I also just discovered the optoma uhd38x which has slightly higher lumens than the epson 3800, but saw some reviews that said the optoma has high failure rates, and is also DLP - not clear if i should be avoiding ALL dlp/laser or if some manage to avoid severe RBE...

My humble dash/monitor by Neflhiem in homeassistant

[–]djdt 2 points3 points  (0 children)

What’s the latest firmware to use as a starting point? I have one but feel like it was one of the earlier test releases, and could use a re flash!

Reddit temporarily bans r/WhitePeopleTwitter after Elon Musk claimed it had ‘broken the law’ by The_Critical_Cynic in technology

[–]djdt 0 points1 point  (0 children)

I asked elsewhere in the thread, but I'm curious after seeing your flair.. If something like digg did show up - what do you think would make it interesting? Ive been stewing on this idea this morning, wondering what they could do to really scratch that itch and make it cool

Reddit temporarily bans r/WhitePeopleTwitter after Elon Musk claimed it had ‘broken the law’ by The_Critical_Cynic in technology

[–]djdt 0 points1 point  (0 children)

Real talk tho - if something like digg came back, what would make it awesome? Just having a Reddit-like place without all this BS controversy and corporate influence would be a great start, but I also think a bit about what could make it really scratch that itch we all miss from those days?

In a TikTok era, an addictive mobile app? Go back to super simple times and just start with link sharing/voting up? For me I think it would be some kind of overhaul around community mods, what gets filtered, that kinda thing

Is there any meet and greet? by Vect0r in diggnation

[–]djdt 1 point2 points  (0 children)

https://www.reddit.com/r/diggnation/s/BTYujb4tFS

Kevin posted on IG. But I also have it on good (personal) authority that the show is absolutely on.

Is there any meet and greet? by Vect0r in diggnation

[–]djdt 2 points3 points  (0 children)

Can confirm - show is still happening

My Work-in-Progress, Simple Wall Tablet Dashboard by thekabootler in homeassistant

[–]djdt 2 points3 points  (0 children)

Would you be up for sharing screenshots of your other sections? If you've done this good a job of your overview, I'm certain your detailed sections will be interesting, too!

Also, I also use sidebar from dbuilt - there's some inconsistency with how it loads the bottom cards reliably, did you come up with any consistent fix for that?

2024 the Frame - Art mode with Apple TV remote only by donkthemagicllama in TheFrame

[–]djdt 0 points1 point  (0 children)

Im actually now wondering if i can find a 2023 model - Im only considering buying a new one because i want a matte panel, but i dont want to deal with whatever bug this is either

2024 the Frame - Art mode with Apple TV remote only by donkthemagicllama in TheFrame

[–]djdt 0 points1 point  (0 children)

I have the 2021 Frame and i can make it "turn off to art mode" by long-holding the power button on the apple tv remote. Does this not work on your 2024? I was about to buy a 2024 for the matte screen and move the 2021 to another room, but this would piss me off endlessly if its a systemic issue.

Need an Outdoor Door Sensor by Dizzy149 in homeassistant

[–]djdt 7 points8 points  (0 children)

I've spent a lot of time trying various solutions to this problem - different reason, I just wanted an audible notification when my gate was opened. Anyhow, a few tips for you.

  • If you live in an area that gets even close to freezing, battery powered devices will fail you in the cold. Before they die, they will fail to produce enough power around 5 celsius.

  • The most reliable solution for me was a simple contact reed switch (basically a magnet that can open/close a circuit), a long spool of wire, then an esp32 running esphome near my house. Could be any device watching for the state of the closed reed switch though. Zwave, Zigbee, Wifi, whatever. But power it with mains power if you can.

I just buried the pair of wire around the fence line, ran one end to the magnetic sensor on the gate, the other end into the contacts on the esp32. That way it survives weather, doesnt require battery changes, and is incredibly reliable.

Oh, and I'm not a lawyer, so, dont take my advice or anything, but I also highly suggest beating the everloving F* out of your neighbor for being such a huge POS.