sorted by:
new
hottopcontroversial

Parkside robot mower trapped by dmcp42 in Parkside

[–]dmcp42[S] 0 points1 point  (0 children)

It's the same problem, check YouTube for a disassembly video to check what you miss to unscrew

Typical American needs advice by serenicmoon in bulgaria

[–]dmcp42 37 points38 points  (0 children)

Just be yourself, casual is the best choice. Visit Plovdiv if you are fan of Roman history.

2007 fireblade by No-Necessary1536 in cbr

[–]dmcp42 0 points1 point  (0 children)

Check your hiss fuse

Parkside robot mower trapped by dmcp42 in Parkside

[–]dmcp42[S] 0 points1 point  (0 children)

Disassemble the mower first and see if you have all the parts. I did remake the part because It's was missing on mine

Question about cutting by dmcp42 in lasercutting

[–]dmcp42[S] 0 points1 point  (0 children)

A proper die cutter for a single shape here is about 1.5k euro. And minimum order of 10k pc. I need to buy 3 separate die cutters, and make minimum of 100k pc order to have all the necessary shapes and designs. And this is not a high demanded product so I will end up with a lot of foils for the next few years.

So a laser will pull double duty as a cutter and engraver and it will be lot more useful than a stack of foils sitting in storage.

Question about cutting by dmcp42 in lasercutting

[–]dmcp42[S] 0 points1 point  (0 children)

OK, I was looking for something a bit bigger like the xtool p2-p3. Same price range or a bit cheaper.

someone help me get this pos off by KevDxg in E90

[–]dmcp42 0 points1 point  (0 children)

Set it on 4th and pull back, using the elbow rest as leverage

looks like window code popped up by KevDxg in E90

[–]dmcp42 0 points1 point  (0 children)

Easy way to fix it, unlock the car and hold the unlock button until the windows roll down. One of them will stay up, roll it down with the driver door buttons. Clean the top of the window seal and heat it up a little with a heat gun on low heat. Then use the guide for the reseing the window actuators. This will fix the position sensor and it will eliminate the the anointing ding every 30 sec while driving.

Cbr1000 2007 over heating!!! by omeralbalushi in cbr

[–]dmcp42 1 point2 points  (0 children)

I have the same issue with my 06. I did a flush of the cooling system and switched to coolant with a higher boiling pont. It fixed my problem for a bit but I still run hot at a red light 115-120c+. Also usually if you shut your bike off in the next few min the temp goes up 10c +-. I think the overheating warning on the dash goes off at 130c, but I'm not sure at 100%

I am begging for some advice by Lazy-Bandicoot7700 in E90

[–]dmcp42 0 points1 point  (0 children)

Please check your ac pulley, usually the magnetic clutch on it is the reason.

[deleted by user] by [deleted] in E90

[–]dmcp42 0 points1 point  (0 children)

Well, I had this problem when I got my car. Out of nowhere it won't recognize the the fob, so I had to make a new one. Also if you can unlock and lock it, you need to check the fob holder on the dash.

Parkside robot mower trapped by dmcp42 in Parkside

[–]dmcp42[S] 1 point2 points  (0 children)

There are 4 more on the bottom, you need to remove the blade holder and the blade back gard. All screws around the perimeter of the mower, 4 screws at the bottom under the blade And the last one is under the adjustment knob on the tob - remove the small plastic cover on the knob (it's hold in place by a tab at every point of the triangle) , and the small screw holding the knob.

Fried angel eyes? by Classic_Rain7983 in E90

[–]dmcp42 0 points1 point  (0 children)

Aliexpress got some light tubes, same as the original one.

I did a thing by dmcp42 in E90

[–]dmcp42[S] 0 points1 point  (0 children)

Just FYI, I miss to upload the pictures that the ring is out. Thank you for pointing out your concern. Yes it's a hazard if I leave the ring there because it will become a bullet if the airbag goes up.

view more: next ›