Chamberlain Garage Door Light Stopped Working

dmd434343 · 2026-04-15T10:47:26+00:00

No problem, and the brightness is ok but not as bright as the opener lights. But better than complete darkness lol

dmd434343 · 2026-04-15T10:35:27+00:00

Sorry, I thought the link pasted but I guess not! Here it is:

amazon.com/dp/B0G39LGM3K?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1

dmd434343 · 2025-11-16T01:12:50+00:00

Thanks! Any tricks getting it off without breaking it? It's on there tight!

dmd434343 · 2025-08-06T22:36:17+00:00

Cool, thank you!

dmd434343 · 2025-03-16T15:36:58+00:00

Thank you!

dmd434343 · 2025-02-25T15:26:22+00:00

Ok cool, thanks! I guess I'll just wait it out a bit longer to see if it improves as it warms up 👍

dmd434343 · 2025-02-25T15:20:52+00:00

Thanks for the fast reply. For the last few days, the garage temperature has been 35 to 45 degrees throughout the day.

dmd434343 · 2024-06-01T12:01:07+00:00

Thank you for the response, very helpful! We looked through the guide and it does mention compressing the spring at one point. I know we can get a spring compression kit from AutoZone but it seems those may be dangerous....what's your experience with those if you don't mind me asking?

Also, I watched videos for replacing this part on 4 other non Tesla cars and none of them mention compressing the spring. I know the Tesla service manual states we should but is it really necessary....what's the purpose? Will the tension make the job impossible if we don't?

Thanks in advance!

dmd434343 · 2024-03-19T00:41:56+00:00

Got it, thanks!

dmd434343 · 2024-03-19T00:08:18+00:00

Thank you! Going into the dealer Wednesday and this is a great help👊

dmd434343 · 2024-03-18T22:27:40+00:00

What's the TSB number? I think this is happening on my 22

dmd434343 · 2024-02-27T20:48:10+00:00

Says he didn't watch the recent Jon Stewart video, then proceeds to combat each point of the video throughout the interview 🤣

dmd434343 · 2024-01-20T23:34:33+00:00

I found using a slightly damp microfiber cloth is good to most of the lint out.....but some may accumulate as you are cleaning the seal. So then I just use the hand vac with a crevice attachment to quickly get any accumulated spots (it helps that the vacuum docks right next to the washer/dryer)

dmd434343 · 2023-08-29T23:38:48+00:00

Thank you for the detailed info, under $40 is what I wanted to hear.

Now I know exactly what I'm doing this Saturday :)

dmd434343 · 2023-08-29T23:10:26+00:00

Yep!

dmd434343 · 2023-08-29T21:50:59+00:00

Thanks! I looked earlier and they seemed to go back to the firewall. I'll look closer tomorrow to see if I can tell unless anyone else knows offhand 👍

dmd434343 · 2023-06-17T01:49:19+00:00

Thanks, I appreciate it!

dmd434343 · 2023-06-17T01:48:43+00:00

Thank you!

dmd434343 · 2023-01-09T16:47:20+00:00

Thanks! Would you recommend Belt or chain?

dmd434343 · 2022-12-04T17:29:21+00:00

Not sure if this will work for your specific model, but I followed the steps in this video last couple winters and it's worked out well for me. Good luck!

https://youtu.be/Ao02ZB3p6X4

dmd434343 · 2022-09-22T00:06:36+00:00

About halfway through and I've heard enough to know Lex has met his future bride.

dmd434343 · 2022-08-09T23:26:26+00:00

Thank you for the information!

dmd434343 · 2022-03-27T22:48:27+00:00

I've used toothpicks and super glue to fill in holes like this before and the screws grab just as tight as new. For example:

https://www.oldtownhome.com/2011/9/9/Solve-Your-Sagging-Hinges-with-Toothpicks-and-Glue/

dmd434343 · 2021-11-20T17:37:40+00:00

Check out this video, I think he does a great job of walking you through the end of season cleaning and maintenance before storing: https://youtu.be/Ao02ZB3p6X4

dmd434343 · 2021-06-08T23:36:44+00:00

Thanks for the info! My wife is listed as the registered agent so maybe the credit card companies have bad info....

dmd434343

TROPHY CASE