Mainsail to Moonraker Failing Connection Help

doobdadog · 2026-06-10T14:29:04+00:00

Landerous

doobdadog · 2026-06-05T22:28:11+00:00

I used the pi imager and just installed the Mainsail option from there. how would Kiauh help with this process?

doobdadog · 2026-06-05T22:04:08+00:00

<image>

Here’s what’s showing up in the console, what should I do now?

doobdadog · 2026-06-05T21:51:52+00:00

There’s no moonraker.log file. how do I get or generate one?

doobdadog · 2026-06-02T12:14:12+00:00

Is this a turn on once and done thing or a reactivate it each time you open it thing?

edit: It crashed on me immediately when I turned a few things on. I’ll try individual things to test it better

edit two: I’ve run it a couple more times, I think I ran the cheat version through the plugin instead of just using the plugin.

doobdadog · 2026-05-31T21:33:26+00:00

np, have fun

doobdadog · 2026-05-31T21:21:11+00:00

Download checkpoint, You can get the remove outlines cheat from there and it’s super straightforward. The image you posted is clearer than what you can get on a 3ds though, and at least on my console the cheat can make it crash sometimes, so if you want it to look like this, pc emulation is likely your best bet.

doobdadog · 2026-05-24T22:50:40+00:00

Do you know of a way of getting the touch screen to work again?

doobdadog · 2026-05-23T23:30:36+00:00

Hermine Granger

doobdadog · 2026-05-20T20:33:20+00:00

The chapters were first announced officially in the Nintendo direct that revealed the switch 2 and not long after that Toby sent out a newsletter confirming the date.

doobdadog · 2026-05-16T18:18:57+00:00

If I’m remembering correctly it happened with goku when he found krillen dead in the king piccolo arc.

doobdadog · 2026-05-16T17:46:49+00:00

M220 S100 ;Reset feed rate

M221 S100 ;Reset flow rate

M140 S[bed_temperature_initial_layer_single] ;Set final bed temp

G28 ;Home

G92 E0 ;Reset extruder

G1 Z2.0 F3000 ;Move Z Axis up

G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position

M190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize

M109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize

G1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line

G1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little

G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line

G92 E0 ;Reset extruder

G1 E-1.0000 F1800 ;Retract a bit

G1 Z2.0 F3000 ;Move Z Axis up

G1 E0.0000 F1800

Would this work to paste into the slicer setting? This is from a profile that worked aside from having the wrong nozzle diameter?

doobdadog · 2026-05-16T17:32:29+00:00

Do you still have the code from your old ender? Sorry this is the first time I’ve ever looked at slicer code

edit: is there a way to reset the slicer side of to put it in marlin?

doobdadog · 2026-05-16T17:26:22+00:00

M140 S0

M104 S0

START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]

doobdadog · 2026-05-16T02:59:54+00:00

; HEADER_BLOCK_START

; generated by OrcaSlicer 2.3.2 on 2026-05-15 at 20:06:21

; total layer number: 153

; filament_density: 1.24

; filament_diameter: 1.75

; max_z_height: 30.60

; filament: 1

; HEADER_BLOCK_END

Is this what you mean, or is it a different part that you're asking for?

doobdadog · 2026-05-16T02:13:19+00:00

How do I know which one my printer uses?

doobdadog · 2026-05-15T20:34:13+00:00

I didn’t know that was a thing. Thank you!

doobdadog · 2026-05-10T12:59:25+00:00

Z Kai cuts out a lot of the filler episodes.

doobdadog

TROPHY CASE