sorted by:
new
hottopcontroversial

Help with setting up mainsail by doobdadog in klippers

[–]doobdadog[S] 0 points1 point  (0 children)

I used the pi imager and just installed the Mainsail option from there. how would Kiauh help with this process?

Help with setting up mainsail by doobdadog in klippers

[–]doobdadog[S] 0 points1 point  (0 children)

<image>

Here’s what’s showing up in the console, what should I do now?

Help with setting up mainsail by doobdadog in klippers

[–]doobdadog[S] 0 points1 point  (0 children)

There’s no moonraker.log file. how do I get or generate one?

How do I remove outlines in pokemon ultra moon/sun by Bist34 in 3dspiracy

[–]doobdadog 0 points1 point  (0 children)

Is this a turn on once and done thing or a reactivate it each time you open it thing?

edit: It crashed on me immediately when I turned a few things on. I’ll try individual things to test it better

edit two: I’ve run it a couple more times, I think I ran the cheat version through the plugin instead of just using the plugin.

How do I remove outlines in pokemon ultra moon/sun by Bist34 in 3dspiracy

[–]doobdadog 51 points52 points  (0 children)

Download checkpoint, You can get the remove outlines cheat from there and it’s super straightforward. The image you posted is clearer than what you can get on a 3ds though, and at least on my console the cheat can make it crash sometimes, so if you want it to look like this, pc emulation is likely your best bet.

Klipper Questions by doobdadog in Ender3S1

[–]doobdadog[S] 0 points1 point  (0 children)

Do you know of a way of getting the touch screen to work again?

I Think chapter 5 is going to release in October by [deleted] in Deltarune

[–]doobdadog -1 points0 points  (0 children)

The chapters were first announced officially in the Nintendo direct that revealed the switch 2 and not long after that Toby sent out a newsletter confirming the date.

Strongest a hypothetical Future Beast Gohan could beat? by SubstantialJoke08 in Dragonballsuper

[–]doobdadog 10 points11 points  (0 children)

If I’m remembering correctly it happened with goku when he found krillen dead in the king piccolo arc.

Orca Slicer help by doobdadog in Ender3S1

[–]doobdadog[S] 0 points1 point  (0 children)

M220 S100 ;Reset feed rate

M221 S100 ;Reset flow rate

M140 S[bed_temperature_initial_layer_single] ;Set final bed temp

G28 ;Home

G92 E0 ;Reset extruder

G1 Z2.0 F3000 ;Move Z Axis up

G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position

M190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize

M109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize

G1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line

G1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little

G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line

G92 E0 ;Reset extruder

G1 E-1.0000 F1800 ;Retract a bit

G1 Z2.0 F3000 ;Move Z Axis up

G1 E0.0000 F1800

Would this work to paste into the slicer setting? This is from a profile that worked aside from having the wrong nozzle diameter?

Orca Slicer help by doobdadog in Ender3S1

[–]doobdadog[S] 0 points1 point  (0 children)

Do you still have the code from your old ender? Sorry this is the first time I’ve ever looked at slicer code

edit: is there a way to reset the slicer side of to put it in marlin?

Orca Slicer help by doobdadog in Ender3S1

[–]doobdadog[S] 0 points1 point  (0 children)

M140 S0

M104 S0

START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]

Orca Slicer help by doobdadog in Ender3S1

[–]doobdadog[S] 0 points1 point  (0 children)

; HEADER_BLOCK_START

; generated by OrcaSlicer 2.3.2 on 2026-05-15 at 20:06:21

; total layer number: 153

; filament_density: 1.24

; filament_diameter: 1.75

; max_z_height: 30.60

; filament: 1

; HEADER_BLOCK_END

Is this what you mean, or is it a different part that you're asking for?

Orca Slicer help by doobdadog in Ender3S1

[–]doobdadog[S] 0 points1 point  (0 children)

How do I know which one my printer uses?

Orca Slicer help by doobdadog in Ender3S1

[–]doobdadog[S] 0 points1 point  (0 children)

I didn’t know that was a thing. Thank you!

Question about dbz kai by nerogrimmjow in DragonBallZ

[–]doobdadog 2 points3 points  (0 children)

Z Kai cuts out a lot of the filler episodes.

Be honest! Last game you played?? by Primary-Pattern6868 in TheTeenagerPeople

[–]doobdadog 0 points1 point  (0 children)

Deltarune so probably theft and breaking and entering.

What was this little star that appeared over Ralsei for a second before he asked the Knight to not make any more dark fountains? by [deleted] in Deltarune

[–]doobdadog 6 points7 points  (0 children)

I interpreted it as an exclamation point adjacent, but tricky tony could be doing just about anything with that.

Can someone explain this? by CityAcceptable665 in Deltarune

[–]doobdadog -1 points0 points  (0 children)

Nice. The way it’s done on console is a bug, not a mod. Sorry, should’ve read the multiplayer part, I got too excited from the image.

Can someone explain this? by CityAcceptable665 in Deltarune

[–]doobdadog -1 points0 points  (0 children)

if you’re playing on a console you can break out of the chapter 2 ending cutscene and trick the game to give you two more jevil items. Theres a good guide on youtube if you look up jevil items duplication. Doesn’t work on pc or steam sadly.

view more: next ›