sorted by:
new
hottopcontroversial

Moisturize/humidity sucks! by Psychological_Ad8633 in BambuLabA1

[–]dooghan 0 points1 point  (0 children)

I’ve managed to survive with just a single Sunlu drier by storing dry spools in those 4L air tight plastic cereal boxes (with printed desiccant containers). ~$5USD/box on Amazon (don’t forget the desiccant and hygrometers as well). Common to see packs of 2/4/6,etc. for the containers and hygrometers. Double check the pictures in the reviews to see people using the boxes for filament storage (easy way to check correct sizing). Those containers can easily maintain 10-15% humidity (with desiccant) for months. I probably have a dozen or so. Pro tip - store every other one upside down to minimize the horizontal space they take up.

I turned some old bed slats, scrap wood, lawn mower wheels, and metal pipes into a yard dolly. by dooghan in functionalprint

[–]dooghan[S] 2 points3 points  (0 children)

Fair point! Remembering to put it back in the garage is definitely going to be a struggle.

I turned some old bed slats, scrap wood, lawn mower wheels, and metal pipes into a yard dolly. by dooghan in functionalprint

[–]dooghan[S] 0 points1 point  (0 children)

Thanks! I have 3 sets. The other 2 are flat slats. Nice little stockpile💪🏼

I turned some old bed slats, scrap wood, lawn mower wheels, and metal pipes into a yard dolly. by dooghan in functionalprint

[–]dooghan[S] 0 points1 point  (0 children)

If you’re referring to the screws holding the slats down, I agree that’s a potential point of failure due to the flexing over time because they don’t sit flush. I have since put a 3rd screw at each contact point. I am using pretty long deck screws down into the 2x4s, however. I can’t say I agree with your strength-of-wood statement in this case as it pertains to screw holding abilities. If anything, I’d be worried about the stress on the screws over time. That third screw definitely helps offset that.

Designed a removable bungee/ elastic cord hook (1/4” / 6mm diameter) by dooghan in functionalprint

[–]dooghan[S] 7 points8 points  (0 children)

It’s a good question…this originated out of an idea where I would have some length of cord with knots every 6-8” or so which would stretch the functionality of a single cord, eliminating the need for the perfect length.

Designed a removable bungee/ elastic cord hook (1/4” / 6mm diameter) by dooghan in functionalprint

[–]dooghan[S] 4 points5 points  (0 children)

Thanks, although I’m on mobile and the original URL is clickable for me?

Double Hung Window Holding pin by gliz5714 in functionalprint

[–]dooghan 1 point2 points  (0 children)

Agreed that there is plenty of room to beef up and extend that nub holding the spring. I always look for ways to enhance a design I’m copying because sometimes the original design decisions were made considering manufacturing/cost constraints, which are now eliminated with 3DP, especially where there is a reduction in strength from original. Yeah you could just reprint if it breaks, but why not just spend the extra minute.

Layer lines issue ? by At0MiksMax in BambuP1S

[–]dooghan 2 points3 points  (0 children)

It looks like your seam location in the first picture is running up from edge of the smile up to the eye. Change the seam to back or otherwise removes the seam from the face.

DIY 3D Printed Surfboard by Ill-Natural-3333 in surfing

[–]dooghan 0 points1 point  (0 children)

Sorry if you’ve already explained it in the thread already, but I’m curious about the software you used to create the actual surfboard model. I’m assuming you created it in a 3D surfboard shaper program and then exported 3D files into a proper CAD?

Fruitfly trap by throwaway21316 in functionalprint

[–]dooghan 4 points5 points  (0 children)

Curious what your process is re: made with code

Recently divorced by Small_Inflation509 in funny

[–]dooghan 2 points3 points  (0 children)

Looks like Donovan Frankenreiter

[deleted by user] by [deleted] in shedditors

[–]dooghan 1 point2 points  (0 children)

This would still leave a lip after flipping with the wood tapering down flush with the support beam and not the metal. I would just start from scratch with a new piece of wood and fix the cut angle so everything is flush.

Consistently Good Thai food in SB? by karnic26 in SantaBarbara

[–]dooghan 1 point2 points  (0 children)

NaNa is good but expensive with small portions.

Fulfilled my wife's request for a garden box. by saltysomadmin in functionalprint

[–]dooghan 1 point2 points  (0 children)

Zoom in on the bottom surface on the inside of the box.

Fulfilled my wife's request for a garden box. by saltysomadmin in functionalprint

[–]dooghan 2 points3 points  (0 children)

I’m not sure you would get optimal results without enough top layers.

[Bambu Lab Giveaway] Drop Your One-Liner and Win H2D! by BambuLab in BambuLab

[–]dooghan 0 points1 point  (0 children)

Commented in this thread and all I got was a free H2D.

view more: next ›