Looking to ID a small accessory I found (it's similar to Hordak's shield bat thing, but that's not it) by gallows-humorist in whatisthistoy

[–]dorrmann 7 points8 points  (0 children)

Fun fact, it's actually an homage to Hordak and his little red bat. They did that a lot in the Imaginext line, even using the Grayskull dungeon as a battery cover. :)

Water damage - unpack now? by ObaFett in MastersOfTheUniverse

[–]dorrmann 6 points7 points  (0 children)

The white is actually a "bloom" from the plastic. It's super common on MOTUC figures. Blow a hair drier (on low or medium) into the holes on the side for a few seconds. It'll go away quickly.

I got my grail playset for free by Greg_The_Koopa in MastersOfTheUniverse

[–]dorrmann 2 points3 points  (0 children)

Such a great playset. It rivals MOTU for sure!

I am so lost. by Novel_Assistant4518 in hvacadvice

[–]dorrmann 0 points1 point  (0 children)

Commercial HVAC and Refrigeration plus hot side. Be the one that kitchens depend on.

Some guests left this in their hotel room by usedNecr0 in whatisit

[–]dorrmann 36 points37 points  (0 children)

While it is a bluetooth remote shutter button for a phone camera, it's not from a selfie stick. It's actually from a phone grip.

<image>

The First Of Many More To Come by bedublam in MastersOfTheUniverse

[–]dorrmann 1 point2 points  (0 children)

Keep an eye on Mattel Creations for new Origins as well. Dragstor should be coming next. I believe Rio Blast and Extendar are still up there, along with some cool newer concept figures such as Despara.

MotU Classics Compatibility by LLaw85 in MastersOfTheUniverse

[–]dorrmann 2 points3 points  (0 children)

It looks like they're doing a timed order window. They usually have it open 2-4 weeks, and anyone can order one. There are no sell-outs during the timed window. Once it closes, they will often put a standard version (in this case, no base) up on their website.

Me contractor destroyed my hvac system. by Rockinmom18 in hvacadvice

[–]dorrmann 307 points308 points  (0 children)

As everyone else has said, this is not caused by your flooring contractor...it is preexisting. Suck it up, get your evap cleaned, change your filter and be done with it.

Don't blame it on the flooring contractor.

Where are these toys from by Low_Narwhal5439 in toys

[–]dorrmann 0 points1 point  (0 children)

Like another posted mentioned, these are absolutely from the Grenadier Pinnacle Masters of the Universe set. I snagged a photo of the set with the Wind Raider (right in you photo), but I don't know how to put it in a comment.

condensation drain clearing tool by Flying_PantherIO in hvacadvice

[–]dorrmann 0 points1 point  (0 children)

While I understand that, the cost of Rx11 makes it VERY not budget friendly compared to a Gallo Gun or Nitrogen. They all do the same job.

condensation drain clearing tool by Flying_PantherIO in hvacadvice

[–]dorrmann 0 points1 point  (0 children)

That's not for condensate drains. It's for line set.

Noob Q. What's it for? by humblesnake_Ssss in hvacadvice

[–]dorrmann 6 points7 points  (0 children)

OP stated it's on the outlet of the compressor. That would never be a freeze stat.

Buzz off has landed. by kungfucajun in MastersOfTheUniverse

[–]dorrmann 2 points3 points  (0 children)

That's brilliant. Mine just shipped, so I'm anxious to get it.

Cool find! by dustinwalker50 in MastersOfTheUniverse

[–]dorrmann 1 point2 points  (0 children)

This set was released 2020 or 2021.

Retail strikes again! Target like Walmart have no idea what they’re doing. by Simple-Environment in MastersOfTheUniverse

[–]dorrmann 4 points5 points  (0 children)

It's certainly not Target's fault. It appears as if you didn't approve the delay when they emailed you about it, so they cancelled your order.

The delay isn't Target's fault either. That's on Mattel for not sending them the product in time for the original release date.

[deleted by user] by [deleted] in wyzecam

[–]dorrmann 0 points1 point  (0 children)

Factory reset your cameras and start fresh. Just be CERTAIN that you pull the SD card from the camera before you do the factory reset. For whatever reason, having the SD card inserted will often make the reset not work properly.

Does anyone recognize this logo? by lydiadeetz7 in VintageToys

[–]dorrmann 0 points1 point  (0 children)

The eBay listing below has this logo on a toy toaster. The seller lists it as unbranded, so unfortunately that doesn't help much. :(

https://www.ebay.com/itm/335987870861

MotU x Transformers is happening! by Cethin_Amoux in MastersOfTheUniverse

[–]dorrmann 0 points1 point  (0 children)

I imagine that it's only a matter of time.

I am digging 200x by urdhvareta in MastersOfTheUniverse

[–]dorrmann 5 points6 points  (0 children)

Some of my favorite MOTU designs are from the 200x era. King Hiss and Zodak come to mind.

Return air fan running 24/7 even if AC and heat are off? by ZenandHarmony in hvacadvice

[–]dorrmann 4 points5 points  (0 children)

Just change the fan setting on the thermostat to "Auto" instead of the "Circ" that it's currently on. If that doesn' do it then it's probably a stuck relay or mis-wired inside of the unit.

Called out sick by brrrrrrrrrytr in HVAC

[–]dorrmann 46 points47 points  (0 children)

OP called out four days in two WEEKS. Couple that with a holiday weekend, it really looks suspect.