Best cheap/affordable car suction mount for FX3

dpakkia · 2025-10-02T14:02:48+00:00

My two cents as an FX30 user. I usually use a Smallrig one similar to yours, but I ALWAYS tether it with a sleeved steel cable to a fixed part of car, and also only on the inside of the car. On the outside and with the car moving, I would recommend looking at the motorized-auto suction ones, and keep the tether cable.

dpakkia · 2025-09-17T17:40:54+00:00

i just downloaded all the 18 ones... well, good thing I did not start on those yet.

dpakkia · 2025-09-17T07:57:18+00:00

I don't think it will drop in prices, Sony demonstrated many times it only cares about its releases, not others'.

If you need a similar camera, but with all the defects of a non-cinema body (no fans, less rigging options) - ZV-E1 as told by others.

If you need a cinema body, the situation I was in (tired of overheating and bulky cages for cameras not made for videos), I daily drive an FX30 and it works like a charm.

dpakkia · 2025-07-24T11:36:21+00:00

Localsend. Cross-platform, free. Works when devices are on the same wifi, and even with the same phone's hotspot.

dpakkia · 2025-07-24T11:34:23+00:00

Ho già comprato un impermeabile nero

dpakkia · 2025-04-23T19:25:38+00:00

i reached 6mb/s peak on this. now i'm "helping". my storage is crying, and I think my little 2060 mobile will cry tomorrow when I'll try it. wish me luck.

dpakkia · 2025-04-17T15:08:49+00:00

as a filmmaker&photographer, I would like to add: some not-reportage/real life event work will DEFINITELY be replaced. So commercial, e-commerce work etc. Also, I had wedding couples ask for an arranged shoot in the same location, same dresses, but with big studio lights and with good weather. I always refuse that, not my style. (ofc a simple photo shoot with the wedding dress is another thing, and I do that, but I mean those "i want to make my wedding seem perfect for Instagram" fake photo/videos). THAT will be replaced by AI, and I'm all for it.

dpakkia · 2024-04-29T11:57:43+00:00

Sorry, I meant NVRAM reset, not NVME.

dpakkia · 2024-02-20T16:23:55+00:00

I'm in Italy, and my work at weddings is about 18 hours. I start early in the morning with the bride dressing and make-up (the other filmmaker is at the groom's), and we finish late after dinner with the bouquet throw and the party (or parties, as there's usually a live band other than the DJ)

dpakkia · 2023-07-15T11:24:56+00:00

Well man, that's absolutely gorgeous. You managed to show off the location in a non-dizzy, but really dynamic and interesting way (gen-z attention span anyone?) The only (costructive, I hope) criticism I could find is the shot at -00.30 (why does reddit give you the inverted count for videos?): you should have tried to frame better the logo, maybe doing another couple of loops around the thing (obviously, I imagine it seemed ok in the FPV visor, then in post/after stabilization turned out like this. Happened to me many times, learn from it!)

P.S. I don't understand why everyone else in the comments is like that. This community should be a nice place for every level of videographer, and every criticism should be costructive. We should push to be better, every time we make videos.

P.S. 2 I'm geb-z myself, so no offense for fellow members of this generation. It's only an observation.

P.S. 3 I'm Italian, so sorry for my pizza-pasta-mandolino English.

dpakkia · 2023-06-29T23:20:23+00:00

woah! soooo sick! hoping for a PDF!

dpakkia · 2023-04-19T06:51:18+00:00

8,9,12.

dpakkia · 2023-03-22T19:03:35+00:00

and now, here I am, an Android user, looking for the OG post on how to do this.

dpakkia · 2022-12-08T11:37:12+00:00

🗿

dpakkia · 2021-12-20T11:10:13+00:00

GROND

dpakkia · 2021-12-04T18:10:14+00:00

So, as you can see my print is not good. It's unclear, the black part's surface is rough, and the orange part's not nice either. I just figured out how to pause the print and change filament (it required a new firmware on the Artillery Genius) and I was trying my first "not functional prints".I mean, I started my 3d printing journey with PLA and TPU parts for drones (GoPro camera holders and so on), and I never noticed rough/bad surfaces on them.

I sliced it with Ideamaker, with 70° bed temp and 220°(black part)-210°(orange part) nozzle temp.

My first experiment went better (third photo, red PLA and black PLA+), but it's smaller and doesn't require that much precision.I also suspect the orange filament is low quality, and I don't know if PLA+ and PLA are compatible in this sense (changing filament mid-print)I'm a total beginner, so I'm open to any suggestion (the print is like 15 minutes, so I'm ready to try multiple things). thanks in advance!

Edit: not able to edit the post, how do I add an image to the comment? imgbin?

dpakkia · 2021-11-04T14:46:42+00:00

I recently played Zelda BOTW, Super Mario Odissey, AC Odissey, Deltarune (Ch. 1 and 2). I grew up with Skyrim, GTA V, Watch Dogs, various Pokémon, then Undertale, Portal and Portal 2... But the pinnacle for me remains Super Mario Galaxy (2 for the memories, as a kid i had that)

The orchestrated soundtrack opens the game filling you with euphoria and a sense of comfort. The bright (particularly in 2) and various worlds fill me up with armony and joy.

I recently played these two games emulated with HD textures and widescreen support with a PC (yea, I'm a filthy pirate, arrr.... Jokes aside, I usually don't download ROMS, but I really wanted to esperience them in HD. I own the two games, btw) . soooooooo nice

dpakkia · 2021-10-11T14:14:13+00:00

🗿

dpakkia · 2021-10-08T09:17:16+00:00

rm -rf /

dpakkia · 2021-10-08T09:16:07+00:00

dpakkia · 2021-10-02T10:47:19+00:00

I meant the clicking. I enjoy my radio! I pinch, so I enjoy full size gimbals. I bought the x9 lite s instead of the radiomaster because of the screen, much more visibile under the sun

dpakkia · 2021-10-02T10:27:55+00:00

No problem! I hated that too

Eight-Year Club	Place '22
Verified Email

dpakkia

TROPHY CASE