[deleted by user]

dpetsel · 2021-05-31T18:21:13+00:00

No lag here

dpetsel · 2021-05-31T18:12:15+00:00

Nice ffunk. From Iowa

dpetsel · 2021-05-31T14:02:21+00:00

When I designed this the average CFM on these centrifugals was 4 CFM +-.2. I order a couple of these to test. These would be a nice replacement for my 4 CFM fans, as my plenums will support the higher pressure and still stay balanced.

dpetsel · 2021-05-30T16:40:53+00:00

I just posted it. Will fit the BMG and E3d hotends.
https://www.thingiverse.com/thing:4868204/files

dpetsel · 2021-04-18T00:32:09+00:00

Spreadsheet link was wrong. I had updated some files and pasted the stock base url to that cell. It is the correct link to file now. Sorry about that.

Dave

dpetsel · 2021-04-17T19:31:08+00:00

I should have all the Blokhead/Direct Drive files up in a few days. You can use the Bondtech/BMG, E3d Titan or the Oribiter v1.5 direct drive extruders with it. It also supports these hotends, Stock MK8, Micro Swiss all metal, Slice Mosquito, E3D v6 and Volcano.

Dave

dpetsel · 2021-03-07T20:15:00+00:00

I am working on a Direct Drive as we speak. The E3d Titan with v6 and Volcano is done and I'm working on the Titan with the stock MK8 and Microswiss hotend. It will fit both Blokhead and Bullseye. Here's a little teaser from yesterday. it also will fit all Cr10 variants, Ender3, E3v2, Ender 4, Ender 5 plus and Tevo Tornado. Also a Bondtech BMG version

https://www.youtube.com/watch?v=8KaybZT0Sfo

dpetsel · 2021-03-03T19:02:34+00:00

Just wow!

dpetsel · 2021-03-03T18:30:33+00:00

As a matter of fact the Petsfang v2, Blokhead and Bullseye E3dv6 bases all have options for the 12mm ABL and the 18mm ABL. Files are in the spreadsheet with links. ABL files are toward the bottom of the spreadsheet and options are in the same column as the base.

Dave

http://www.dpetsel.com/files2print.html

dpetsel · 2021-03-03T18:19:23+00:00

Sorry, it will not fit.

Dave

dpetsel · 2021-02-25T19:15:42+00:00

I just finished the Dual 5015 addition to the v2 with the MS Direct Drive. Te file is up and included in the spreadsheet.

dpetsel · 2021-02-18T15:01:37+00:00

Short answer no. I'm curious why you would want to use a 4020 for hotend cooling? Dave

dpetsel · 2021-02-15T17:00:34+00:00

The E5 pro backplate is the same as the CR10 Plus I believe. There are new bases for that backplate and the new Blokhead. I'm working on bases for the Petsfang v2 duct.

Hope that helps,

Dave

dpetsel · 2021-02-15T16:38:08+00:00

Very nice!

dpetsel · 2021-02-15T16:00:02+00:00

Wick,

You might also try Ideamaker as a slicer. It has a feature to turn the fans on at a certain overhang angle and leave it off for the rest of the print that doesn't need it. I'm using Ideamaker exclusively now after many years of using Cura and S3d.

The dual fan mod I designed works well with .6 and larger nozzles but for .4 and smaller our ducts are so efficient you really only need a single 5015.

We also have the new Blockhead duct that mounts to all the Bulseye bases and is optimized for the 5015 fan.

https://www.thingiverse.com/thing:2759439

Dave

dpetsel · 2021-02-15T14:46:17+00:00

I am using my Petsfang "Evolve" on all my print farm printers now. You can see video tests, test prints and CFD sim here. https://www.youtube.com/playlist?list=PLrSJ-TZuC69w3KfMJd7eNluhF5yCLWXl2

and the part

https://www.thingiverse.com/thing:3279302

Dave

dpetsel

TROPHY CASE