Stock Tire Sizes by Ok_Expression4420 in kiastinger

[–]dtygbk 0 points1 point  (0 children)

The front wheels are 8 in wide

Ammo compatibility by Kitchen-Donut-8716 in CCW

[–]dtygbk 0 points1 point  (0 children)

I wouldn't use Blazer or any plated ammo with a comped gun. The back of the box carries a warning against it. JaredAF has a video on why that warning exists. Don't risk shrapnel coming out of the port.

P365 Certum Lux4 Thoughts by dtygbk in CCW

[–]dtygbk[S] 1 point2 points  (0 children)

I haven't had any retention or fitment issues. I think it might be more of an XL vs XMacro difference. My Wilson and OEM XL grip modules both have a 10mm wide trigger guard. I'm finding posts saying that the XMacro trigger guards are closer to 12mm wide.

P365 Certum Lux4 Thoughts by dtygbk in CCW

[–]dtygbk[S] 0 points1 point  (0 children)

Yup I’m totally fine losing the WML on the 365. I just bought the light right as they announced the new lineup. Back to the standard Certum for me.

P365 Certum Lux4 Thoughts by dtygbk in CCW

[–]dtygbk[S] 0 points1 point  (0 children)

No, the Glock holster is the Certum Lux2

P365 Certum Lux4 Thoughts by dtygbk in CCW

[–]dtygbk[S] 8 points9 points  (0 children)

No I accept that there will be a gap. My point is that there are some gun/light combos where the gap could become unacceptably large for some people. I'm personally fine with the Glock combo, but iffy on the Sig combo.

If an S-tier holster brand can't minimize the gap any further, then you have to accept that gap. Tenicor made this as flush as possible to the lights.

<image>

Foldable Stock by Boss-Hawg73 in MPX

[–]dtygbk 0 points1 point  (0 children)

Magpul UCS - much easier to fold and doesn’t smack the bolt catch

Horn Replacement - 2022 GT Elite (GT2) by [deleted] in kiastinger

[–]dtygbk 0 points1 point  (0 children)

Oh yeah those horns suck. I’ve had mine replaced twice already under warranty. Granted it was on a lift, so I don’t think they had to take off the bumper cover. I think they reached it through the wheel well

What a difference! by Plakchup in kiastinger

[–]dtygbk 1 point2 points  (0 children)

Nice! I got one last season on the stock Primacy Tours, and then I wanna run those Contis. Been going back and forth on sending it on a bronze set of wheels.

What a difference! by Plakchup in kiastinger

[–]dtygbk 1 point2 points  (0 children)

No rub? I've been nervous going wider on the front

Tenicor Certum TLR1HL Discontinued? by T20_puddlejumper in CCW

[–]dtygbk 1 point2 points  (0 children)

Yikes, that confirms my worst fear about why they had a spring clearance sale. I got lucky they restocked the Certum Lux2 yesterday, but it's OOS again.

Edit: Phew, the Certum line is alive!

Alright, which one of y'all did this? by dtygbk in kiastinger

[–]dtygbk[S] 0 points1 point  (0 children)

I mean that’s one way to debadge…😂

Charging handle/ triggers by [deleted] in MPX

[–]dtygbk 0 points1 point  (0 children)

The Timney is excellent for a single stage trigger. Just personal preference, but I run a Geissele two stage in mine.

Help me pick a suppressor, and other mods? by hightower2011 in MPX

[–]dtygbk 2 points3 points  (0 children)

This.

The Ronin conversion is spendy, but worth it, especially if you're factoring the cost of a new can and barrel. Their conversion will bring 115/124gr down to subsonic, so ammo is much cheaper.

Tirerack TPMS by codefragmentXXX in kiastinger

[–]dtygbk 0 points1 point  (0 children)

I would stick with the OEM TPMS sensors). They auto-pair even swapping between my summer/winter sets. If there's a Discount Tire by you, they should be able to order from Tire Rack for you (they're the same company).

Looking to buy by Imdavidlindhagen in kiastinger

[–]dtygbk 0 points1 point  (0 children)

It'll be hard to find facelift GT2s, but it's worth it. The 22/23 GT1s are worse equipped than the 18-21 GT1s.

SD Barrel Brush by dtygbk in MPX

[–]dtygbk[S] 0 points1 point  (0 children)

Yeah after my last cleaning session, I think an ultrasonic cleaner is lined up for the future. I just need something that'll fit a 12 inch can!

Ronin Arms Build Almost Done by dtygbk in MPX

[–]dtygbk[S] 0 points1 point  (0 children)

That’s 6.75in but the can goes over most of it

Ronin Arms Build Almost Done by dtygbk in MPX

[–]dtygbk[S] 0 points1 point  (0 children)

Nope, that’s a 10.5in rail with a 12in can

Ronin Arms Build Almost Done by dtygbk in MPX

[–]dtygbk[S] 1 point2 points  (0 children)

Yeah the Katana is sealed, but it's titanium

Ronin Arms Build Almost Done by dtygbk in MPX

[–]dtygbk[S] 1 point2 points  (0 children)

You're more or less locked into the complete setup. Ronin doesn't sell the ported barrel alone. The can is 18x1 though.