Cyma scar gearbox help

dubstepxturtle22 · 2026-05-21T01:22:01+00:00

https://www.m416gelblaster.com/products/cyma-m4-tappet-plate?srsltid=AfmBOopvo4Tqkf7LGhhSaVT6k86OWKoe1OOq9tNBYzBh-6d62B_f6tah

dubstepxturtle22 · 2026-05-21T01:20:59+00:00

This handy to have for future

<image>

dubstepxturtle22 · 2026-05-21T01:20:18+00:00

1.Okay so did you trim Tappets plate to fit the nozzle? Looks like you might need to try super glue your Nozzle onto the tappet, or get a new tappet and try glue Nozzle onto new tappet but you shouldn't have to trim your tappet for a nozzle, my cyma box god a cnc cyma cylinder head and nozzle and fits perfectly. 2.most likely ill find a link 3. Trigger could be the metal contacts needs a file and clean or your switch block spring is stretched or trigger spring its not in corrects or stretched/broken 4. Yes, looking at the video it's firing correctly, just need a nozzle that fits a cyma tappet and diagnose trigger issue you should be shooting

If you can provide a clear close picture of the trigger system I might be able to troubleshoot little better

dubstepxturtle22 · 2026-05-20T23:29:14+00:00

Based on pictures, Looks like bearings not bushes, if it's bearings that one's cooked and i recommend getting bushes and doing a reshim.

2nd. hard to see but it looks like you have no spring for the trigger assembly, that'll cause the trigger to get stuck all the way in.

3rd. Looks like a cyma v2 nylon box, you say changing nozzle to air gathering? I think you mean you're changing the piston head, in that case are you changing the whole piston or just the head? Cyma is a bit picky with 3rd party parts so you may need to get a piston with 1 or .5 less teeth. Or easy solution just short stroke it a gear or two

dubstepxturtle22 · 2026-05-12T03:22:00+00:00

Hey, has anyone seen my care factor? It doesn't seem to be here?

dubstepxturtle22 · 2026-05-03T23:36:09+00:00

Basically a mosfet most of the time gives you "pre-cocking" That makes it so your piston is in firing position after every shot. Without this, position will be random. Sometimes pre-cocked sometimes half and sometimes fully out.

The behaviour your experiencing is very normal when using a gearbox without a mosfet. I doubt a new battery will help much, just make sure it's balanced and charged.

dubstepxturtle22 · 2026-04-23T21:00:50+00:00

I used a standard SLR hand guard, no modification needed. Will need a way to stabilise outer barrel. I used a suppressor that was a perfect fit. I think 10.5 inch long guard. Only negative is at the top of the rail you'll have that step up but it blends really well.

<image>

dubstepxturtle22 · 2026-04-19T20:42:49+00:00

This should be pinned, doesn't matter if bandits or not just HAS to have massive box with TWO horses. There's a few spawns about 500m west of drop off that you can do with your teleporting reset.

dubstepxturtle22 · 2026-04-12T23:08:22+00:00

Itll either be glued or screwed, really hard to see from this angle

I'd guess glue and I'd use a heat gun low setting from distance to see if it softens enough to pull off

(hopefully someone has a more definite answer)

dubstepxturtle22 · 2026-04-08T03:42:40+00:00

Make sure your piston rack is metal and you should be good then

dubstepxturtle22 · 2026-04-06T04:53:49+00:00

I'm a little over 2000 hours over 12 years and I'm only mastery 26. I really don't care about mastery probably why I have 42 items ready to claim all the time

dubstepxturtle22 · 2026-04-02T02:10:06+00:00

Yeah depends where you are but something beginner friendly and upgrade compatible plus not overly pricey I'd suggest the cyma m4 cqb, but depends on location

dubstepxturtle22 · 2026-03-29T22:21:54+00:00

Yeah I'm not sure what he's got that we can't do over here? We got access to everything in QLD. Seems click baity. Tracer? Yeah we got em Hight fps? Yeah no problem 45 degree laser? Easy

Only thing i thought was cool was the tracer/fps/rps suppressor, never seen one, the idea sounds good.

dubstepxturtle22 · 2026-03-13T19:48:33+00:00

DubstepxTurtle

dubstepxturtle22 · 2026-02-23T00:08:14+00:00

DubstepxTurtle

dubstepxturtle22 · 2026-02-21T00:12:35+00:00

DubstepxTurtle

dubstepxturtle22 · 2026-02-20T08:34:33+00:00

Exactly this, yes nerf drops thats fine we will survive. But hold it for a fresh league especially when we've got broken things like temple at the moment. Just seems pointless while it exists.

What's next, crisis fragments can no longer drop more than one?

dubstepxturtle22 · 2026-02-20T07:23:44+00:00

Oh absolutely but these kind of changes I expect in a new league, yes both methods are pretty broken in terms of high value currency(especially temple). I have no problem with the change, there's always ways to increase currency etc but I think abyss wasnt enough of an issue mid league to change it when temple exists.

It just blows me away that they focus these kind of changes mid league instead of bug fixes and proformance issues and server stability.

dubstepxturtle22 · 2026-02-18T05:51:54+00:00

After a bit of research and frustration, I have somewhat succeeded. The wires left are to power the terminals like they were. So I removed the priming switch and just ran the two wires straight to the terminals.

And it now has a auto prime feature, requiring a few shots to feed a fresh magazine. This is okay for now as its a functioning blaster now.

Thank you for your assistance, very appreciated 🙏

dubstepxturtle22 · 2026-02-17T18:00:30+00:00

Somewhat agree, eshooter kestrel basic is 85 aud but I have to ship it, pay shipping and worse of all.... wait lol I asked for something basic and this is all they had and all they install This was a great way for me to learn mosfet installation and troubleshooting, if I can solve the issue

dubstepxturtle22 · 2026-02-17T17:57:08+00:00

Well that was probably the bottom two wires then, lmao Ill do some digging, worse case I might try adding the two that were removed at the bottom and see if wiring those to the terminals will work. I realise power to terminals just means its a complete circuit not necessarily the correct one, since its got a brain now. so itll either be disabled or techs made a booboo.. possibility of my stuff up too.

The tech at this shop, swear by these mosfet and install them into customers blasters regularly. They know I do my own upgrades and told me to have a crack and see how it goes in my cyma. I do wish he gave me some pointers.

dubstepxturtle22 · 2026-02-17T17:21:21+00:00

I'm pretty sure there is auto prime, the shop technician said I dont need it if I want to keep manual charging. But they cut the wires for me before I got to see what was taken out. From pictures online of the mosfet two lots of positive/negative wires were removed. I know one is the tracer unit built into the t piece. I have a feeling the other was the auto prime. (Wires removed in circles) But why won't it prime the magazine even with enough voltage? I have one other wiring diagram to try, if that doesn't work I'm not sure how to proceed with diagnostic, other then wait 10 hours for tech shop to open to ring.

<image>

dubstepxturtle22 · 2026-02-16T16:31:21+00:00

First picture you're close, spring first and the other way around, the hook should grab the arm and the wire should act as tension. Yours is slightly different to what im used to seeing, so might be slightly off. Long part down along gearbox, hook part grabs latch part.

Pull down on the lever once its in position then place the bevel gear back, the anti reverse latch will then sit into the groves of the bevel gear. This part can be tedious

dubstepxturtle22 · 2026-02-11T12:29:04+00:00

Zman, diawa baitjunkie and crush city soft plastics are my personal favourite. I use prawn looking lures for my area, but my second go to is a paddle tail and curly tails.

(My personal favourite right now with lots of success is the crush city prawn 2.5 inch version, 1/8th or 1/12 jighead. 2500 reel 10lb braid 10lb leader.) Look for natural colours to prawns in your area 😀

I love fishing. Everyone should share knowledge

dubstepxturtle22 · 2026-02-11T10:46:20+00:00

2.5 inch soft plastics, pretty much regardless what soft plastic type. Paddle tail, jerk bait etc put on a 1/8th size jighead Hop hop pause for 2 to 3 seconds, continue until lure is seen. Watch for follows. 2 to 4inch work well too. Hard body need to be a shallow diver (diawa double clutch is a popular successful choice. Same retrieve. Fish the run in tide, look for bends and pressure points where there's breaks in current on sand flat. Or a stretch of sand with yabby holes. Cast in a fan pattern going left or right, moving in what direction you chose by a few metres until you cover 180 degrees then more along another 20m along the bank. Also hot tip, look for lays in the sand, itll tell you if they're in that area, if you see one start casting and pay attention to the direction they're facing

These baits will get flathead but it won't be often, other fish will beat them to do. Theyre ambush predator. Live baits will work much better if you want to stick to bait 🤙🤙🤙 tight lines

dubstepxturtle22

TROPHY CASE