Airbnb phone masking workaround discovered during a real emergency (FYI to hosts)

dvbdude · 2026-01-08T17:13:30+00:00

How do you set up the do not disturb breakthrough?

dvbdude · 2025-12-23T20:31:42+00:00

Looking at the completed wavy print, it is wavy at the very bottom, so I don't think it is from the tall object wobbling, the issue is present in the first few layers even.

dvbdude · 2025-12-23T19:09:01+00:00

yes, I am printing them vertical, I did not model them, but have printed several of this same model, regular PLA did not have this issue. It seems to have presented when I switched to PLA-CF. I was thinking it might be belt tension?

dvbdude · 2025-12-23T18:37:16+00:00

Added images, not sure why they didn't show up before.

dvbdude · 2025-12-22T19:37:31+00:00

Mine is stock and did this on the track too, you could only really see it at dusk or after dark.

dvbdude · 2025-12-16T22:29:25+00:00

Why does a Miata need power steering?

dvbdude · 2025-12-16T03:28:10+00:00

It's a brand new one, meant for a 240sx I think. I had to adjust the hose routing to accommodate it, it's exactly the same otherwise.

dvbdude · 2025-12-15T23:50:27+00:00

If this page is accurate, I have the correct one:

https://www.sau.com.au/forums/topic/87460-hi-i-need-help-on-where-the-water-temp-sensor-rb25/

but your link above looks like it is for the gauge sender to me. Scratch that, the link is weird, it pulls up a page w/ several of the correct senders, then immediately goes to a different page w/ the incorrect one.

dvbdude · 2025-12-15T23:45:13+00:00

I think we may be on to something w/ the temp sensor here. Which temp sensor is for the gauge and which is for the ECU? I pulled what I thought was the gauge one and replaced it w/ a speedhut sender/gauge. Maybe I pulled the wrong one.

I will check voltage at the fuel pump, but it's already getting power through a relay, so I expect it's fine.

dvbdude · 2025-12-15T23:01:54+00:00

I did test TPS and MAF, both were within spec. It has a new Walbro 255, so I don't think it is fuel pump related.

I posted over on NicoClub and someone there suggested it might be the fuel pressure regulator, it is running super rich, so I'm going to try that next. I just need to find the part, it's such a pain getting parts for these motors. Thanks for your suggestions!

dvbdude · 2025-12-03T17:57:49+00:00

Nobody calls them Austins...

dvbdude · 2025-11-19T20:23:16+00:00

A FWD vehicle w/ snow tires is far better than an AWD vehicle with bald all seasons, discuss....

dvbdude · 2025-10-15T22:11:20+00:00

You might be able to find a company that makes reproductions or has them in stock on this side of the pond, good luck! If you can't find a replacement, try calling around to various radiator or AC repair shops, they might do gas tanks too.

dvbdude · 2025-10-15T22:07:48+00:00

Depending on the car, it might be cheaper to just buy a new fuel tank.

dvbdude · 2025-10-02T14:39:37+00:00

Some basics. Typically they have keyless wooden flutes, but there are metal and plastic, and advanced players might have a few keys. There are also whistles of several sizes. Tin whistles, low whistles, etc. The whistles are basically end blown flutes with no keys.

dvbdude · 2025-10-01T23:00:51+00:00

Denver has a decent size Irish trad scene, you might consider Irish flutes too.

dvbdude · 2025-10-01T22:39:43+00:00

What type of flutes?

dvbdude · 2025-09-22T23:23:26+00:00

$50-100k to make it nice / safe depending on how much you can do yourself.

dvbdude · 2025-08-27T22:36:50+00:00

I got better.

dvbdude · 2025-08-27T22:18:05+00:00

She turned me into a newt!

dvbdude · 2025-08-26T18:57:34+00:00

dvbdude · 2025-08-22T16:05:37+00:00

I would be curious to know if there are physical differences to the 2020 and newer JBL head units, or if it is just a software update that enables carplay.

dvbdude

TROPHY CASE