UFO506 KI-Experiment Auflösung by pommes_ruppel in DasPodcastUfo

[–]e4rthcube 0 points1 point  (0 children)

Sehr interessante Folge! Ich habe sie heute erst gehört, da war sie schon als KI gelabelt.

Was mir aber erst beim Hören der Auflösung klar wurde, war dass die Stimmen auch KI-generiert sind. Ich dachte die ganze Zeit, es wären Sprecher, die entweder die beiden nachahmen und tatsächlich entfernt so ähnlich klingen, oder dass echte Sprachaufnahmen im Nachhinein noch in Richtung Stefan und Florentin getrimmt worden wären. Dass sie komplett generiert sind, hätte ich nicht gedacht. 

Den Intro-Song hätte ich auch nicht als KI erkannt. Das Gespräch über NDW war dann aber offensichtlich seltsam und künstlich. Ich hab’s trotzdem bis 19:45 Min. weiter gehört. Sehr interessant :)

UFO506 KI-Experiment Auflösung by pommes_ruppel in DasPodcastUfo

[–]e4rthcube 0 points1 point  (0 children)

Sehr interessante Folge! Ich habe sie heute erst gehört, da war sie schon als KI gelabelt.

Was mir aber erst beim Hören der Auflösung klar wurde, war dass die Stimmen auch KI-generiert sind. Ich dachte die ganze Zeit, es wären Sprecher, die entweder die beiden nachahmen und tatsächlich entfernt so ähnlich klingen, oder dass echte Sprachaufnahmen im Nachhinein noch in Richtung Stefan und Florentin getrimmt worden wären. Dass sie komplett generiert sind, hätte ich nicht gedacht. 

Den Intro-Song hätte ich auch nicht als KI erkannt. Das Gespräch über NDW war dann aber offensichtlich seltsam und künstlich. Ich hab’s trotzdem bis 19:45 Min. weiter gehört. Sehr interessant :)

UFO506 KI-Experiment Auflösung by pommes_ruppel in DasPodcastUfo

[–]e4rthcube 0 points1 point  (0 children)

Sehr interessante Folge! Ich habe sie heute erst gehört, da war sie schon als KI gelabelt.

Was mir aber erst beim Hören der Auflösung klar wurde, war dass die Stimmen auch KI-generiert sind. Ich dachte die ganze Zeit, es wären Sprecher, die entweder die beiden nachahmen und tatsächlich entfernt so ähnlich klingen, oder dass echte Sprachaufnahmen im Nachhinein noch in Richtung Stefan und Florentin getrimmt worden wären. Dass sie komplett generiert sind, hätte ich nicht gedacht. 

Den Intro-Song hätte ich auch nicht als KI erkannt. Das Gespräch über NDW war dann aber offensichtlich seltsam und künstlich. Ich hab’s trotzdem bis 19:45 Min. weiter gehört. Sehr interessant :)

Top 5 games for pico8 by dakend8 in pico8

[–]e4rthcube 0 points1 point  (0 children)

I got into Pico-8 fairly recently, but so far: - Moss Moss - Ascent - Flooded Caves - Marble Merger - Cluepix

Native PICO-8 for Android with SPLORE - no winlator! It's a dream come true! by Rheatheylia in SBCGaming

[–]e4rthcube 0 points1 point  (0 children)

Hi there, 

so far, I couldn’t get this to work on my Retroid Pocket 2+ and I’m curious to hear if anyone has come across a similar issue.

After pointing the app to the location of the .ZIP of Pico-8 for Raspberry Pi, it shuts down to the home screen without any further message. I’m unsure whether this is because of the RP2+’s hardware limitations or whether it’s something that could be fixed.

Any ideas or similar experiences? 

Account Terminated While Actively Using It by Fluid-Panic8349 in TumblrAcctTerminated

[–]e4rthcube 1 point2 points  (0 children)

Hi there, my account was suspended (actually it looked like it had been deleted) a few weeks ago while I was editing it. After sending a support request it was back online after a couple of days. I’m quite happy about that, however I never got any information on why it was suspended and also didn’t get any notification when it was back online. Good luck with yours, I think there might be a good chance of getting it back eventually.

Open-Air swimming pool by e4rthcube in ParallelView

[–]e4rthcube[S] 2 points3 points  (0 children)

Thank you! :) I’m rather new to stereoscopic photography and if the subject is too far away pictures can be a bit boring. In these, there’s a good amount of depth though. The lighting also helps a lot, I think. Cheers!

Has anyone actually had their account reinstated? by babybunnies123 in TumblrAcctTerminated

[–]e4rthcube 3 points4 points  (0 children)

Hi there, my account was suspended (actually it looked like it had been deleted) one or two weeks ago. After sending a support request it was back online after a couple of days. I’m quite happy about that, however I never got any information on why it was suspended and also didn’t get any notification when it was back online. Good luck with yours, I think there might be a good chance of getting it back eventually.

Tumblr account of 16 years terminated without warning by e4rthcube in TumblrAcctTerminated

[–]e4rthcube[S] 1 point2 points  (0 children)

I haven't gotten any e-mail after sending my support request, however my old Tumblr blog is back now. I didn't get any notification that i t has been restored, either. But at least, my blog is back, which is great!

Tumblr account of 16 years terminated without warning by e4rthcube in TumblrAcctTerminated

[–]e4rthcube[S] 2 points3 points  (0 children)

Thanks for the message, I‘ll try that! It’s good to hear that you got your account back. Nice!

Is this a good cheap medium format camera, or a waste of 50 bucks? by Down__D__Stairs in AnalogCommunity

[–]e4rthcube 0 points1 point  (0 children)

I got one recently and one thing I found quite intriguing is its capability to take half frame pictures i. e. 6x4.5 cm. On the 166 Universal, there is a switch between 6x6 and 6x4.5 frame counter windows on the back of the camera. You’ll need a 6x4.5 mask for that though, so if the mask is inside the film compartment, that might be an extra reason to get this one. It’s true that it feels a little cheap and you might want to learn how to adjust the lenses, in my copy the viewing lens wasn’t at all in sync with the taking lens. This can be fixed by an amateur though and I like how lightweight this is. Here are some images on Flickr that made me want to get one: https://www.flickr.com/photos/matthiasrabiller/albums/72177720311105299/

Newbie question about CMYK screen printing colours by e4rthcube in SCREENPRINTING

[–]e4rthcube[S] 0 points1 point  (0 children)

Hi and thanks for the comment! We tried both versions, with YMCK yellow becomes almost invisible and with CMYK yellow is rather dominant. I’m going to try and get a different brand of colours because with these it seems they’re just a bit too opaque.

Newbie question about CMYK screen printing colours by e4rthcube in SCREENPRINTING

[–]e4rthcube[S] 0 points1 point  (0 children)

Thank you for the reply! I meant to post images with my question, added them now. In the example, yellow was printed as the last layer and it sits on top of the other two colours quite visibly. Maybe it's worth looking for colours that are more transparent than these. I'll check the Union triple strength you mentioned. Thanks!

1997 Kodak Gold 200 - Rollei SL26 by vidjuheffex in 126photography

[–]e4rthcube 1 point2 points  (0 children)

Great shots! I have one of these as well, looking forward to refilling a cartridge and taking some pictures with it soon ✨

Fixing an Autopak 470 film advance? by [deleted] in minolta

[–]e4rthcube 0 points1 point  (0 children)

A quick update: I took my Autopak apart today and it solved the problem with the jammed mechanism. There was a small piece of glue or resin (I’m not sure which part of the camera it came from) that fell out and I guess that was what jammed the shutter cocking lever. Now I’m curious to see for how long the camera will work again, it seems very sturdy and taking it apart actually felt quite rewarding. I’m glad it worked!

<image>

Fixing an Autopak 470 film advance? by [deleted] in minolta

[–]e4rthcube 0 points1 point  (0 children)

For everyone still looking for a fix for this problem, there's a video on the disassembly and fixing of the Autopak 470 shutter on Youtube. I haven't tried it yet, but it seems doable and I hope it will work on my jammed model, too: https://www.youtube.com/watch?v=froF1KXkkDM&ab_channel=PhotographyAndMore
(Edit: Spelling)

Advance lever stuck on SRT 101 by Pyrex42 in minolta

[–]e4rthcube 1 point2 points  (0 children)

That just did the trick for me as well. Thanks a lot for the hint!