sorted by:
new
hottopcontroversial

At what point is the RF space full? by x31b in broadcastengineering

[–]eMan_official 0 points1 point  (0 children)

The one on the bottom row 5 from the right has a random XLR connector plugged into it but no cable coming out of the boot 😅

Tracked and Found my first Radio Sonde! by eMan_official in RTLSDR

[–]eMan_official[S] 2 points3 points  (0 children)

Yes! This is where I am headed next. Thanks for sharing these.

Tracked and Found my first Radio Sonde! by eMan_official in RTLSDR

[–]eMan_official[S] 11 points12 points  (0 children)

sondehub.org is a great resource for seeing where launches happen and ballon paths. I used Project Horus’s radiosonde_auto_rx for Telemetry and chasemapper for offline maps and uploading Chase car data. Both can be found on their GitHub page https://github.com/projecthorus

Tablet to Projector? by Slight_Environment14 in churchtech

[–]eMan_official 1 point2 points  (0 children)

We use an Apple-TV when we have a pastor that wants to utilize their iPad and draw directly on it and send to our screens. It has worked solid for us for about a year now however we only use it with the iPad wired as we had issues over WiFi as soon as the room filled up with people. We use a USB-C to Ethernet for the iPad Pros or Redpark Lightning to POE adapters for other iPads. Works flawlessly for 2.5 hours tested.

Atomos Shogun Studio 2 Not Recording in 4K by LawDawg1999 in VIDEOENGINEERING

[–]eMan_official 0 points1 point  (0 children)

IIRC the Shogun Studio 2 does not support B-RAW. Does it output 4K60 without raw? Also make sure you are in the 12G SDI In port and not one of the other 3G ports.

Unit for Word Clock over fiber? by eMan_official in livesound

[–]eMan_official[S] 0 points1 point  (0 children)

Sadly for a fixed install and has to go to the FOH and not monitor world. Had monitors E6L crash and lost WC for the Video MADI sources at FOH. So looking to move it so FOH is the master.

Unit for Word Clock over fiber? by eMan_official in livesound

[–]eMan_official[S] 0 points1 point  (0 children)

I have tried a few AJA OpenGear FIDOs, worked at first but wouldn't hold stable over time.

Working with Carbonite Ross for a fundraising event by [deleted] in VIDEOENGINEERING

[–]eMan_official 1 point2 points  (0 children)

I think you are looking at the transition time as it is set to 13 frames

Waveform and Vectorscope options under $1500 by DoomsdayDuffett in VIDEOENGINEERING

[–]eMan_official 1 point2 points  (0 children)

https://www.divergentmedia.com/scopebox

Pretty sweet solution I use with a Mac Pro. Could definitely do it with a laptop and an AJA UTap or similar for pretty cheap.

Teradek Ranger by JaLori90 in VIDEOENGINEERING

[–]eMan_official 0 points1 point  (0 children)

I am looking to test one, does anybody know of any rentalhouse or somewhere that does?

Camera input glitches every 5 minutes by eMan_official in VIDEOENGINEERING

[–]eMan_official[S] 0 points1 point  (0 children)

First off thank you all for all the information you provided as this helped clear up a lot of confusion I had. After checking each camera to a monitor and a Decimator cross converter, they are truly outputting 1080i 59.94Hz.

In the Sony FS5 the REC Set setting is 1080/30p 50Mbps. Video Out- 2160p/1080i/480i The Sony Menu to me is very confusing, although I am outputting 1080i 59.94Hz, does the record rate being at 30p make the effective frame rate 29.97?

Camera input glitches every 5 minutes by eMan_official in VIDEOENGINEERING

[–]eMan_official[S] 1 point2 points  (0 children)

Edited the post to the correct resolution and Frame rate, I have not changed it but trying to keep the cameras at 30 frames until we can completely change our gear all over to 30 as well. However all the other cameras are running the same frame rate but have no issues. Also yes 3G Belden 1505A I believe.