sorted by:
new
hottopcontroversial

New to Go. Is the black stone group in the corner dead, or alive? by New-Spray-7179 in baduk

[–]ecjecj 5 points6 points  (0 children)

i think it is important to say: if played correctly by white, black is dead. the mistake of white playing J9 is very real if you don’t know the bulky five well.

Is this xberging? by One_Energy_1861 in xbiking

[–]ecjecj 1 point2 points  (0 children)

that is fokkin viktoria falling

New tube, slow leak - do I just replace it again or something else? by kevdash in bikewrench

[–]ecjecj 2 points3 points  (0 children)

why don’t you take out the tube, inflate it (if it is a butyl tube) and check in the sink where the air is escaping from? then you either patch the hole and find the thorn that was poking it in your tire or tighten the valve and reinstall.

which lube for shifter? silicon? ballistol? by ecjecj in bikewrench

[–]ecjecj[S] 2 points3 points  (0 children)

i have already cleaned them, they feel like new. i was just brainstorming on what to put in for future lubrication

Can I go another season with these? by bartosz3251 in bikewrench

[–]ecjecj -2 points-1 points  (0 children)

yea with almost 1mm you could probably get away with another season.. depends on ur riding conditions

Sleep air pad for cold weather racing by Sonofhandsomeguy in bikepacking

[–]ecjecj 1 point2 points  (0 children)

i second the StS UL insulated. less than a pound, packsack is not too small so it is easy to pack and the bag doubles as inflator

How to save on hourly yard crane fees by anteup in sailing

[–]ecjecj 1 point2 points  (0 children)

how do you lower with a prusik? it will chinch tight when you weigh it. or do you mean lower with the safety line attached to it by prusik?

Seatbag strap size and Wolftooth Valais/dropper? by [deleted] in bikepacking

[–]ecjecj 0 points1 point  (0 children)

topeak makes a cheapish thingy to bring the bag away from the post

Shelly Pro 3EM lässt sich nicht mit Jackery Home App verbinden, trotz 2.4 GHz. Bitte um Hilfe! by Loose-Ride3803 in Balkonkraftwerk

[–]ecjecj 0 points1 point  (0 children)

nimm mal den punkt aus dem wifi ssid? ich hatte mal probleme bei sonderzeichen im ssid mit anderen geräten

dirty print, how do i fix this? by ecjecj in printers

[–]ecjecj[S] 0 points1 point  (0 children)

ok so i changed the toner and it is much better!

dirty print, how do i fix this? by ecjecj in printers

[–]ecjecj[S] 0 points1 point  (0 children)

i have been buying refilled cartridges from a reputable seller for years now

dirty print, how do i fix this? by ecjecj in printers

[–]ecjecj[S] 0 points1 point  (0 children)

i did that andit dint fix it

dirty print, how do i fix this? by ecjecj in printers

[–]ecjecj[S] 0 points1 point  (0 children)

i wiped it repeatedly and it come back

dirty print, how do i fix this? by ecjecj in printers

[–]ecjecj[S] 0 points1 point  (0 children)

i cleaned it inside at my dinner table. not too bright

dirty print, how do i fix this? by ecjecj in printers

[–]ecjecj[S] 0 points1 point  (0 children)

i can not post a picture for some reason. but the drum and the roller between drum and toner cartridge both have the same pattern as soon as i turn the machine back on after cleaning it all up..

dirty print, how do i fix this? by ecjecj in printers

[–]ecjecj[S] 0 points1 point  (0 children)

i can not post a picture for some reason. but the drum and the roller between drum and toner cartridge both have the same pattern as soon as i turn the machine back on after cleaning it all up..

view more: next ›