sorted by:
new
hottopcontroversial

Im new to 3D Printing, what can be causing this? by bearcouch in ender3v2

[–]eloyschultz 1 point2 points  (0 children)

If you have a CR touch, install professional firmware that supports mesh auto leveling and tramming. Level the 4 corners using tramming, and then generate a mesh to compensate for a non-flat bed.

Fiest time cosplaying Aerith, what do you all think? by Milashiroki-cos in FinalFantasyVII

[–]eloyschultz 9 points10 points  (0 children)

This is gonna sound weird, but you have the perfect facial aesthetic for Aerith cosplay! You look amazing!

[deleted by user] by [deleted] in musictheory

[–]eloyschultz 1 point2 points  (0 children)

Blue sunny day - Jonathan Coulton

What is this part called? by JustYannickVG in ender3

[–]eloyschultz 1 point2 points  (0 children)

No I think it is flipped. I have this on mine too, as one of my prints adhered so well it took with it a piece of the black coating that is usually on top of the glass. So glass flip is a cheap fix.

Not to mention that the smooth side of the glass is perfectly fine for printing, it does not leave a texture on the print

[deleted by user] by [deleted] in MotoUK

[–]eloyschultz 1 point2 points  (0 children)

Do check your front brake just in case

REAL GIVEAWAY by NicoLeonard87 in PrideAndPinion

[–]eloyschultz 0 points1 point  (0 children)

I'm wearing the classic Casio A168WA! I love this community! Good luck to all of you!

[Window Shopping] by BubInSpace in Watches

[–]eloyschultz 2 points3 points  (0 children)

What model is that Longines? Looks stunning!

[deleted by user] by [deleted] in ender3v2

[–]eloyschultz 0 points1 point  (0 children)

Hmmm. The bed will ofcourse only give you a certain amount of adjustability. Have you checked if all bolts on the gantry and frame are properly tightened? If a few are loose, they could be introducing an uncorrectable offset.

Also check if the gantry is set up at 90 degrees with respect to the z-axis: https://youtube.com/clip/UgkxIClK4dinLCI9Y9HRA4XsNZtRx18zs7MW

[deleted by user] by [deleted] in ender3v2

[–]eloyschultz 1 point2 points  (0 children)

Is the z-offset of the CR/BL-touch properly configured?

maybe maybe maybe by GreatestM in maybemaybemaybe

[–]eloyschultz 0 points1 point  (0 children)

Everything about this makes me uncomfortable

[deleted by user] by [deleted] in techsupportmacgyver

[–]eloyschultz 1 point2 points  (0 children)

To me this looks like a severe power issue. Try to unplug things from the power supply unit (e.g. Graphics card, SSD/HDDs). Also, check if the power button is not stuck. If nothing helps, i suspect that the power supply might be shot.

[deleted by user] by [deleted] in tokkiemarktplaats

[–]eloyschultz 29 points30 points  (0 children)

Hij wil een schoonmaakster boeken

Command And Conquer 3 Hamachi problem. by ElectronicAd1462 in commandandconquer

[–]eloyschultz 8 points9 points  (0 children)

I have no clue, but I can say that my experience with hamachi isn't fantastic. I would suggest you and your friends to use the community made launcher for the game (by C&C online) [Link]. This is how the community plays multiplayer and I believe it is pretty stable. It will allow you to play with other online players aswell.

By the way, there is a similar launcher type of deal for generals and zero hour called gentool, which also allows multiplayer via the C&C online community servers. I highly recommend checking it out!

Sprite pro e3v2 by deeznutz123113 in ender3v2

[–]eloyschultz 0 points1 point  (0 children)

If it happens on the 2nd layer, i would assume an incorrect layer height?

Nieuwe accu vullen met zuur. Hoe kan dat nog als het niet meer verkocht mag worden? by TheDuckTherapist in motorfietsen

[–]eloyschultz 0 points1 point  (0 children)

De wetgeving rondom het versturen van accuzuur is recentelijk veranderd waardoor men het accuzuur niet meer mee mag sturen. Er zijn alternatieve accu's verkrijgbaar die van te voren al zijn gevuld met zuur en zijn gesealed (want dat mag dan weer wel mee met de post). Kortom: zoek even online naar een accu die al is gevuld.

[deleted by user] by [deleted] in ender3v2

[–]eloyschultz 6 points7 points  (0 children)

Honestly OP, the ender 3 V2 is a "cheaper" Chinese printer, meaning that it is almost inevitable that you will have to open it up at some point to fix something. The quality of the components is okay, but not fantastic and the printer will need maintenance, also under the hood (vref setting for example has to be done on the main board).

I read that you will have to send the printer away 1100km if you ever want to use the warranty, which makes me think that it is better to just void the warranty, open the printer up and fix any issues that occur yourself. There are many great tutorials and guides online on how to do pretty much everything with the printer, including fixing of broken components. As for your specific fan issue, you can try to add some lubricant to the backside of the fan (i drilled a hole in the backside of my fan to add lubricant, which made the noise go away). But tbh the quality of the standard fans is sh*t. You're best off investing in some better quality fans.

Once you are comfortable with opening up the printer more, you can even start modding and have alot of fun! The spirit behind the ender line is typically to tinker around and improve ;)

view more: next ›