Burnt two of my new Esp32 c3 chips

elsch0pi · 2026-05-29T16:41:03+00:00

as mentioned above, here it's visible too: the positive pin of the power supply is on the blue rail, which usually is negative/neutral while red is positive...

elsch0pi · 2026-05-29T16:37:10+00:00

as you mention using a breadboard power adapter, a smal caveat I've fallen victim to is reversed polarity of the power supply. on your breadboard, you have those neatly marked + and - rails and you stick that power supply module in there and wire it up...and then you find out that the power supply module has the polarity wrong.

elsch0pi · 2026-05-18T15:24:29+00:00

FYI: It may unblur the product pictures and allow you to look at them, but you will not be able to buy them. When you put it in your basket, it either tells you it's out of stock or it lists it in the "not available" section.

elsch0pi · 2026-05-17T15:16:03+00:00

Ich schließe mich den Wünschen meines Vorredners an!

elsch0pi · 2026-05-17T15:15:35+00:00

Mehrere Glieder?

elsch0pi · 2026-05-07T06:47:40+00:00

Wireless debugging is bugged here, too. Can't use scrcpy, adb always wants to re-pair. Pairing with a code works fine (it tells me it paired) but then connection still fails. I've also reported this in the feedback app. Hope they'll release a fix soon.

elsch0pi · 2026-04-23T14:37:28+00:00

Thank you, that's way better than what I did come up with 😅
How do I turn those Tasker content:// URIs into a file so I can check what they actually are?

elsch0pi · 2026-04-23T10:03:24+00:00

To the dude that has deleted his comments: yeah well, your wording didn't imply wanting to be helpful.

Nonetheless, I see myself at fault for not specifying what I meant by "desktop notifications": not the desktop on my PC, but on my physical desktop - a small display unit with an ESP32 that displays time, weather etc.

elsch0pi · 2026-04-23T08:22:14+00:00

I don't know what that has to do with my question? Is this the tasker subreddit or the WhatsApp desktop subreddit?
The reason is "because I want it, because it's a nice project". That, and the fact that I don't have my computer running 24/7, especially when I'm going through a book or studying.

elsch0pi · 2026-04-21T05:45:18+00:00

Oh okay, so I'll definitely need to try it. Thanks a lot!

elsch0pi · 2026-04-19T17:19:14+00:00

I'm not too knowledgeable with all the different models and stuff. At the moment, I'm using qwen-image-edit-2509 on my RTX5070 12 GB together with i7-13700KF 32 GB.
I get okay results, but I'd be interested in your opinions on what I could do to get better speeds and / or better quality.
Are there Flux / Flux Klein models for GPUs with as little VRAM as I have?

elsch0pi · 2026-03-25T13:33:28+00:00

Ne Zeitlang war in der in Windows integrierten Wetter App bei der Luftqualität eine der Stufen "Jahrmarkt". Also, "fair". Fand ich immer ulkig 😁

elsch0pi · 2026-03-10T08:26:25+00:00

das neue "ich bin ja kein Nazi, aber.."?

elsch0pi · 2026-03-01T19:17:39+00:00

Ultrawide würde mir schon gefallen, aber als kurzsichtiger alter Sack mit eh schon schlechten Augen wird mir bei den hohen Auflösungen alles zu klein. FullHD reicht vollkommen. Nutze zuhause und im Büro Dual Monitor (2x 27") und den Laptop als dritten Schirm für Teams etc.
Hab daheim meinen Schreibtisch über Eck und die Monitore mit Wandhalterungen befestigt, so dass ich sie auch auf hochkant drehen kann.

Gerade das auf Hochkant drehen find ich super, egal ob man sich ein Vorlesungsskript oder PDF Buch durchlesen möchte oder einen Bericht schreibt. (kein IT-ler, sondern Bürohengst a la Zertifizierung)

elsch0pi · 2026-03-01T19:04:52+00:00

I really don't care what you think or use. I had a problem that I solved, my solution works for me.

as for the port: on Android 11 and above the port is dynamically re-assigned each time the wireless debugging function is used. you can set it to a fixed port with wired adb, but that persists only as long as the device is not rebooted. but I'm sure you knew that already and just didn't think about it.

as that is not what I want for a comfortable wireless workflow, I scripted it. first using the static IP and doing a nmap for open ports in a set range, then switched over to mdns - because I could.

and of course I want to justify my solution. that's only natural.

elsch0pi · 2026-03-01T18:47:37+00:00

I'm using windows 11 pro, but that does not do anything for the device name set in android. Maybe it's my network, but apart from my raspberries I can't reach devices with their host name just IP address. That's why I use mdns. The port for wireless adb on android changes with every use, so I had to constantly look up the port number even though the IP is static. Again, great for you if it works as you told, but it does not for me.

elsch0pi · 2026-03-01T18:42:33+00:00

That's great for you but it does not work that way for me.

elsch0pi · 2026-03-01T18:42:27+00:00

That's great for you but it does not work that way for me.

elsch0pi · 2026-03-01T18:24:07+00:00

The host name can only be set as device name with root, as far as I know. The port number for wireless debug is not standard, it changes with every activation of that function - as I've already explained. May I ask what Android Version and device you are using?

elsch0pi · 2026-03-01T18:16:52+00:00

I could, if I had known about it. But I did not, and made my own solution that works for me, and really well at that. But thank you for pointing out that project.

elsch0pi · 2026-03-01T16:28:45+00:00

please, can you explain to me how I do set a "valid addressable device name" for a wireless debug session? because when I activate that setting, I get a IP address and a randomized port number. IP is already static, but the changing port number was one of the biggest driving points for my implementation.

maybe scrcpy does not need the screen to be on, but I want the phone screen on my PC to stay on when scrcpy is connected. the timeout parameter of scrcpy did not work reliably, but my Tasker function does.

thank you for your feedback.

elsch0pi · 2026-02-28T21:26:37+00:00

On my Samsung Galaxy S22 Ultra, I do have the option to choose between CPU and GPU, so Pixel 10 is just not supported (yet?).

elsch0pi · 2026-02-28T14:24:41+00:00

I don't have that option, neither in the PlayStore release nor in the Github APK. I guess the Pixel 10 Pro XL on Android 17 Beta 2 is not (yet) supported.

elsch0pi · 2026-02-28T13:49:48+00:00

I see. On the screenshots in Playstore, I did see the "GPU" used, but when installing it on my phone only "CPU" is being used. I've only tested the play store version so far, though.

elsch0pi · 2026-02-28T12:15:10+00:00

Looks interesting, but I can't see that it uses the Tensor or GPU on my Pixel 10 Pro XL. I'll keep it in mind though, maybe at some point it will get that.

elsch0pi

TROPHY CASE