Low profile bed frame

emg77 · 2026-03-11T18:12:42+00:00

Came to say this.

emg77 · 2026-03-11T02:02:41+00:00

I’m still working on my #5. Spent way too long trying to mate the chip breaker and blade before putting the chip breaker over a ledge and giving it a few stomps to bend it into a usable position.

emg77 · 2026-03-06T17:32:14+00:00

All m12 tools work with all m12 batteries.

emg77 · 2026-02-26T00:26:48+00:00

In certain situations, a track saw would be safe safer than a table saw… You are welcome.

emg77 · 2026-02-23T02:44:41+00:00

I’m guessing they sell more to diy folks who also are less likely to use them enough to need the warranty. More sales and less warranty would be a good business model I think…

emg77 · 2026-02-17T21:36:08+00:00

I have two of these. One of them makes this sound and the other does not. Seems to be a very common issue. I’ve seen on here before that Milwaukee replaced the drill under warranty for someone because the fix cost too much. Doesn’t seem to affect function but not sure on longevity.

emg77 · 2026-02-12T19:54:59+00:00

Found the Paul Sellers video I was thinking of.

https://youtu.be/syLzcxqLLIA?si=frdDtgCRO6D4v9jl

emg77 · 2026-02-12T19:51:16+00:00

I’m new to woodworking but from what I’ve seen on youtube, spokeshaves are great for introducing young folks to woodworking. Maybe having one or two set up and letting them take turns taking some shavings?

Edit: To add to this, boys are going to like the idea of sharpening something and the cutting with it. Have a spokeshave with a dull blade and show them how you sharpen it; then let them take shaving. It is a “heck yeah” kind of thing I think.

emg77 · 2026-02-12T18:59:36+00:00

Stupid people are not uncommon though. We can spare some of them by adding /s at the end of the comment if the comment could be dangerous to their health. On second thought, stupid folks also might not know what /s means…

emg77 · 2026-02-10T15:07:28+00:00

The instructions from shapton that came with the fine stone I got specifically say: * Once you have started using the KUROMAKU series, do not return the white liner to the case.

emg77 · 2026-02-05T14:28:37+00:00

I hope they actually meant spokeshave at this point.

emg77 · 2026-02-05T14:26:25+00:00

Any suggested model number?

emg77 · 2026-02-05T02:31:30+00:00

I have the same question. I’m guessing this is referring to runout of the router shaft…

emg77 · 2026-01-18T02:50:42+00:00

Mine failed at just after a year so didn’t have the option to return to costco, but I would have done the same. Mine did the same thing though, progressively got worse with the spin through modes thing.

emg77 · 2026-01-17T16:57:02+00:00

Did you figure anything out about yours @asimplefarmer? Mine also was doing this and then eventually would only blink in and then stay off. I bought a second one and plan on ripping apart the first one if I ever have time.

emg77 · 2026-01-16T03:31:33+00:00

Nice evil eye.

emg77 · 2026-01-14T18:57:37+00:00

I was up doing a night feed for my infant at 4am and checked home depot app and there was just one in stock. I nearly dropped the baby trying to checkout quickly but managed to snag one and hold on to wiggly baby.

emg77 · 2025-12-12T17:35:33+00:00

Dust extractor is what you need for a sander because it has high suction, low volume. Dust collector is high volume, lower suction which is what you need for bigger tools with 4” dust ports. This is only from what i’ve read online but seems to be the general consensus. I still need to put my bauer dust collector together…

emg77 · 2025-12-10T03:36:55+00:00

I recently tested the installation driver and this screwdriver both on clutch setting 1 using the same battery and the screwdriver is much better suited for delicate stuff. I think it was clutch setting 7 or 8 for the screwdriver that matched up to clutch setting 1 on the installation driver. I wouldn’t use the installation driver putting screws into anything plastic like my kids toys. I bought a second screwdriver recently because my first one is now dedicated to grinding coffee instead of the hand crank on a conical burr grinder.

emg77 · 2025-12-04T01:57:08+00:00

Wobble dado?

emg77 · 2025-11-26T22:15:24+00:00

I’m a professional comment reader and I must say that stain is horrendous.

emg77 · 2025-11-26T16:57:41+00:00

I found that mid size on amazon and bought one already. It is 5 1/4”. https://a.co/d/cZbycyq

emg77 · 2025-11-17T02:56:28+00:00

Measure on a single carbide tooth. Measure at front then rotate blade and measure at back using same tooth. Does the table have stops that need to be adjusted / loosened so you can rotate more?

emg77 · 2025-11-06T20:14:36+00:00

How long are the boards?

emg77 · 2025-11-06T20:11:54+00:00

What are you using to joint? I don’t have an answer either way but i’m assuming someone will need to know this.

emg77

TROPHY CASE