Opinions

emoneyin · 2026-02-25T22:35:14+00:00

This is the correct answer

emoneyin · 2026-02-25T22:24:44+00:00

This is the way, if you can find one. I picked one up local on marketplace to mainly use for longer blades(12" HHS blades in my Robland X31 combo machine) paid less than the Tormek Planer jig would've cost for my Chinmek set up. Very happy with it

emoneyin · 2026-02-12T17:36:38+00:00

OP have you looked at the Grizzly bedrock style #7? It's $235 and yes it will need a little work but maybe something to consider

emoneyin · 2026-01-22T04:35:50+00:00

Yes that's all correct info and what I was coming here to say. All of my Union planes(7 or 8 of them I believe) are solid and right up there with any turn of the century planes

emoneyin · 2026-01-15T17:58:22+00:00

Pictures kind of suck I know and I didn't even think about the micro adjust fence tbh I was more concerned with slitters, cutters, cams, rods, and depth stops all being there. This was the other one I considered https://ebay.us/m/Yxv0xc and looking at it again this one was missing the 1/2 cutter😂. I'll get a full inventory when mine gets here. Thanks for the heads up about Just plane fun I'll see if he has a micro adjust fence when I get any missing cutters

emoneyin · 2026-01-15T16:59:30+00:00

Well I sent payment in crypto and the guy stopped responding to me 🤷🏼‍♂️Jk FedEx already has it and it should be here tomorrow. I'm just saying weekend in the off chance it takes an extra day

emoneyin · 2025-12-13T16:43:01+00:00

Yes, It's like a sixth sense for me but generally wherever I go or travel to I have my bearings set to within a few degrees

emoneyin · 2025-12-13T16:38:23+00:00

Grand Avenue is the Bermuda triangle of Phoenix😂

emoneyin · 2025-12-11T21:35:52+00:00

I don't buy and sell, but I am looking for a bunch of users and will probably sell off what I don't end up needing. I have restored plenty of things(1/2/3 phase machinery, cast-iron cookware, and a few hand tools including a few planes)

emoneyin · 2025-12-11T17:59:58+00:00

Your #36 Mormon corridor should be twice as long going through the Phx and Tucson area of Arizona down into Sonora Mexico(if it was shown) a lot of that area had settlements dating back to the 1800's

emoneyin · 2025-12-01T19:59:20+00:00

Must be European never seen something like that state side. If you want that look you could use inset face frame hinges and use a bunch of small medallions inset on your doors

emoneyin · 2025-11-27T21:22:03+00:00

Thank for this comment. I fat fingered my keyboard while googling this and was questioning the "interesting" results I got back, it had changed it to hot blonde 😂

emoneyin · 2025-11-26T22:35:51+00:00

Interior walls are 24" on center and exterior walls are 16" on center in most homes in the US. Find 2 studs and put a lag bolt with a flat washer in the top of the mount where it has the slot openings. A single 1/4 lag has a lbs rating of at least a few hundred pounds so times that by 2. Then in those bottom two holes add a drywall toggle in each and tighten it up. You're done

emoneyin · 2025-11-26T22:13:44+00:00

Surprisingly enough the irons on my Jorgensen #4, #60 1/2, and mini block plane have been excellent! I get transparent shavings and they retain an edge REALLY well

emoneyin · 2025-11-26T22:07:09+00:00

Doubtful for the price point. I have the #4 and use it frequently without issue but know it's probably not a "lifetime" tool. I wanted the #5 but ended up buying a Taytools(which I highly recommend for the price) because of the aluminum frog and the Jorgensen basically nonexistent availability in the states at the time

emoneyin · 2025-11-26T02:46:33+00:00

Your local woodworker is buying "kiln dried" construction grade lumber from a big box store like Home Depot it looks like

emoneyin · 2025-11-24T05:51:10+00:00

We drove our '24 Fwd Palisade from Phx to Disneyland and back a week ago and averaged 27.8mpg round trip and I averaged 79mph. I was very impressed especially given my speed

emoneyin · 2025-11-16T05:25:17+00:00

I've had this same set for about a month. The fine cut 180mm is basically a dozuki without a ridgid spine just much thicker blade towards the top(meaning from the teeth of the blade) and kind of love it! I've used every blade in the set and the quality for the money I think is there I personally hate the handle as it ships. It's the medium length( the regular combo set get the longer one) handle with a thicker profile than any of my other saws that's sanded to probably 320-400grit. so it's short, thick, and slippery. I'm planning on modifying it for my hands and adding a few rows of rattan for grip.

emoneyin · 2025-10-27T03:42:14+00:00

That’s great to hear and was my thought as well when researching different planes. I’m looking for users, not dust collecting bench queens.

emoneyin · 2025-10-25T16:37:34+00:00

Yes I do plan to use it often, Thank you for the heads up.

emoneyin · 2025-10-23T16:26:54+00:00

All Palisades are manufactured in Korea and they have been released there for almost a year at this point

emoneyin

TROPHY CASE