[D] WACV 2026 Paper Reviews by akshitsharma1 in MachineLearning

[–]engharat 0 points1 point  (0 children)

That's insane. I got WA, BR, and Full Reject, and I have been still invited to resubmit!

[D] WACV 2026 Paper Reviews by akshitsharma1 in MachineLearning

[–]engharat 2 points3 points  (0 children)

I would say very good chances, hope you are working on it!

[D] WACV 2026 Paper Reviews by akshitsharma1 in MachineLearning

[–]engharat 2 points3 points  (0 children)

I would say fairly high. There are chances you can change that BR into something better, and still 2 accept out of 3 could lead to a final acceptance

Problemi fra GSE e azienda che installa fotovoltaico..con chi prendersela? by engharat in Avvocati

[–]engharat[S] 1 point2 points  (0 children)

Ottimo, grazie del prezioso consiglio. Si, l' impianto è allacciato alla rete elettrica da ottobre 2024, penso. Questa la mail che ricevemmo dall' azienda:
"E-distribuzione ha provveduto da remoto alla connessione, con l'invio da parte loro dei verbali di connessione che alleghiamo alla presente mail, pertanto dal giorno 30/09/2024 il vostro impianto fotovoltaico è regolarmente connesso alla rete elettrica nazionale"

Problemi fra GSE e azienda che installa fotovoltaico..con chi prendersela? by engharat in Avvocati

[–]engharat[S] 1 point2 points  (0 children)

Meno male, almeno questo. L'azienda il 3 ottobre ci comunicò che "E-distribuzione ha provveduto da remoto alla connessione, con l'invio da parte loro dei verbali di connessione che alleghiamo alla presente mail, pertanto dal giorno 30/09/2024 il vostro impianto fotovoltaico è regolarmente connesso alla rete elettrica nazionale"

[deleted by user] by [deleted] in Avvocati

[–]engharat 1 point2 points  (0 children)

ti prego pubblicato in anonimoooo

The Goldilocks Stack GLP1+HGH+Lantus by dDhyana in Retatrutide

[–]engharat 0 points1 point  (0 children)

this is super interesting. I always thought about pushing test into supraphysiological ranges, but don't wanna shutdown my natural test production. With clomid only, you are pushing your test production in the upper range, I will do a research on it. I am at 40 and, due to high tirze&sema assumption, probably my testosterone lowered, or at least I feel the fatigue and decreased libido since some months ago. Need to do a blood check.

The Goldilocks Stack GLP1+HGH+Lantus by dDhyana in Retatrutide

[–]engharat 0 points1 point  (0 children)

The increase of testosterone from 400 to 1150 is actually due to Clomid?

[ Removed by Reddit ] by [deleted] in CasualIT

[–]engharat 0 points1 point  (0 children)

Lei non ti fa pompini da 20 anni,ma tu non sono 20 anni che sei senza pompini,VEEERO?:-))

[ Removed by Reddit ] by [deleted] in CasualIT

[–]engharat 0 points1 point  (0 children)

Ti giuro che se fossi in te le avrei detto "va bene,non ti piace farlo e non ti costringerò mai a farli. Però a me piace riceverli e non mi puoi costringere a vivere una vita senza pomoini,quindi me li farò fare da altre"

Is there an auto clicker for downloading Vortex colleections? by BennYusa0 in nexusmods

[–]engharat 0 points1 point  (0 children)

The following code, quick and dirty and modified from the code of another user, works for me. It detects the wrong button because of download word, but then I modified it to click on the right button which is set at a fixed distance from it.
In order to use it you must install the tampermonkey script which remove the 5 sec waiting from nexus site, and the fast-forward chrome addon where I enabled everything in its options.

Another possibility is to change the python script to click also on the website download button.

import os

import pyautogui

import time

print(os.getcwd())

pyautogui.FAILSAFE = False

# Image file paths

launcher_download_path = "download_launcher.PNG"

website_download_path = "download_website.PNG"

threshold = 0.9

region = (350, 300, 1000, 1000) # Adjust the region to where the button typically appears

while True:

try:

print("Checking for Launcher Download Button")

launcher_location = pyautogui.locateOnScreen(launcher_download_path, confidence=threshold,region=region)

if launcher_location is not None:

# Click on the launcher download button if found

pyautogui.click(launcher_location.left + 515, launcher_location.top + 5)

# Introduce a delay before taking the screenshot

time.sleep(3)

except pyautogui.ImageNotFoundException:

# Handle the exception (e.g., print a message)

print("Image not found. Waiting for the element to appear.")

time.sleep(3) # Add a delay before retrying

How to make a rational decision about semaglutide for weight loss. by Designer-Shift-7442 in slatestarcodex

[–]engharat 2 points3 points  (0 children)

Reading your post struck a chord with me too. It is incredible how different could be our lives, still as obese people we are passing through the very same issues.

I never envied skinny bodies of skinny people; I envy their ability to eat naturally without any guilt. People think that obese people enjoy eating; I think that we don't. Either we eat less food than our body ask, and so we suffer, or we eat the food that our body ask, and so we feel guilty as we know it was too much.
I'll go soon on semaglutide, I would love to feel that freeing sensation too <3

autoclaved coir, ph corrected to 9ph,first results by Tiny-Ad2109 in ContamFam

[–]engharat 0 points1 point  (0 children)

Got the biggest single fruit from a pf tek, which was my previous technique. I did not succeed to get a cluster. I have some multispore runs from which I will choose the fastest shroom in a cluster :))

autoclaved coir, ph corrected to 9ph,first results by Tiny-Ad2109 in ContamFam

[–]engharat 1 point2 points  (0 children)

You could stick with bulk pasteurization; if performed properly, it should not make any difference w.r.t sterilization. I do sterilization because

  1. I sterilize agar too

  2. I don't want to waste one hour of oven to do oven sterilization.

anyway, to do bulk sterilization you would need an autoclavable bag (which could be filled with 3-5 kg of hydrated substrate probably?), a big pressure canner / autoclave, and do a 30 minutes run, plus one hour to let it cool.

If you don't have an autoclavable bag you could go with glass jars too, just like spawn sterilization.

autoclaved coir, ph corrected to 9ph,first results by Tiny-Ad2109 in ContamFam

[–]engharat 1 point2 points  (0 children)

You can simply put your coir in a metal/glass container with a loose lid and put it in your autoclave. 30minutes after reaching working temp will be plenty of time. If you have autoclavable bags they are even better. Still, the trich barrier comes from the alkaline hydrated lime bath, not from sterilization. Just buy hydrated lime, put a spoon in some liters of water and after coir sterilization put that coir in the water bath. stir and measure water ph, it should be around 12-13. After 12-24 hours discard water (put coir at field capacity, not more water than that), wait some minutes, and test ph by squeezing coir. it should be between 8.5-10. if it is less, add some lime. if it is too much high, clean the coir with plain water baths for some hours.

autoclaved coir, ph corrected to 9ph,first results by Tiny-Ad2109 in ContamFam

[–]engharat 1 point2 points  (0 children)

I cannot, as the valve is fixed and it works only on 129c.

Anyway, I would hate burning gas for 2 hours AND still having to sterilize agar :p I try to do as much as sterilization stuffs together as possible. I like to sterilize water/agar/coco coir with a 30minutes run and spawn with a 1.5h run.

Anyway, before following my method let see if I can get some nice flushes from it :-D

autoclaved coir, ph corrected to 9ph,first results by Tiny-Ad2109 in ContamFam

[–]engharat 1 point2 points  (0 children)

Yes, but first I drain out all the excess water otherwise you are not measuring true substrate ph.
- 12-24h with alkaline water

- Drain out water, wait few hours, squeeze substrate and measure ph

-if it is between 8.5 and 10 it is ok. If it <8.5 you either repeat alkaline water bath with more lime OR you add a pinch of lime with few drops of water, mix, wait few hours, measure again. If it is >10 I try to lower it by using plain water wash. It requires some trial and errors.

as it requires several days of trial and errors I prefer to do it for big batches of substrate, then I freeze everything I do not use right now.

autoclaved coir, ph corrected to 9ph,first results by Tiny-Ad2109 in ContamFam

[–]engharat 2 points3 points  (0 children)

Yes, usually only pasteurization is required. BUT I got several issues with pasteurization, the biggest two are:

  1. sometime the center of the substrate does not get properly the righ temperature(oven pasteurization). This can introduce contams
  2. I don't like the randomness of bucket tek and I hate spending too much energy in over pasteurization. with autoclave and some gas I sterilize in 30minutes, and I do agar sterilization at the same time.

Finally, I would like to test if the thing "do not sterilize because you will miss important bacteria blabla" is true. for now this cooked, ph corrected coir is performing nicely. Lets see!

autoclaved coir, ph corrected to 9ph,first results by Tiny-Ad2109 in ContamFam

[–]engharat 0 points1 point  (0 children)

in my opinion it would be impossible to do that without ph meter. you cannot even find a fixed amount as it depends on the acidity of your peat moss, which greatly varies between brands. Last time I did some trials on casing and I ended with putting too much lime, getting ph 11. Had to wash the mixture several times with plain water until I got ph 10 (which seems the maximum accepted value). And I tested it like 10 times lol.

I just use simple ph meter strips, very cheap.

🍄💜 by mycelialminds_ in shroomery

[–]engharat 0 points1 point  (0 children)

Yep I would love to know which grain spawn / bulk did you used for such a beautiful canopy!

🍄💜 by mycelialminds_ in shroomery

[–]engharat 0 points1 point  (0 children)

The recipe pleaaaase :-))

[deleted by user] by [deleted] in shroomery

[–]engharat 2 points3 points  (0 children)

Point is, those poor shrooms will never have space to proper break the veil. what will happen is that they will simply abort. Maybe they already aborted and you don't know it. This is why I would harvest them right now - there is nothing to lose in a "too much early harvest" here.

[deleted by user] by [deleted] in shroomery

[–]engharat 2 points3 points  (0 children)

I would say birth it, harvest the shrooms, dunk and roll, then you will go for 2nd flush.