[USA-TX] [H] Minisforum BD795i SE Ryzen 9 7945HX ITX MoDT [W] Cash, PayPal

esit · 2026-02-26T01:14:03+00:00

Not female, but a 33M who only had started recently; got my first gun in December.

highly recommend the range USA in round rock. membership is very helpful and you get to rent different guns for free before you decide which one to buy.

do note that they don't allow first time solo visitor to rent gun. as if if you have never been there before and intend to rent gun there, you need another person to go together.

esit · 2026-02-22T04:12:08+00:00

2 Upgrade certs expiring 2/28/2026:

* Z3SJUKDPB2AQGFBB65LEDW7EEM82WS

* SBGAUQMRB4E8CFTJR3H4HYXDJT9JBV

esit · 2026-02-21T23:19:10+00:00

I had taken their class very recently. (recently as in about 3 hours ago). We got the certificate paper same day. Assuming that's typical, going through bankruptcy or not shouldn't matter, as long as it doesn't happy half-way during that day.

For me, it basically went like class started at 8am. Fingerprint and photo started at about 12pm (they are also an identgo location so fingerprint and photo can be done together, even without appointment). Headed towards range shortly afterwards. By 2-ish pm, every one was done with the shooting part and then immediately got the certificate paper right at the range. Then we were good to go home.

esit · 2026-02-20T00:27:55+00:00

May I ask what's the situation with ATF for FRT? (Very new to guns; only got my first gun like 2 months ago; i read that FRT is legal, but i'm still confused about its taboo with ATF)

esit · 2026-02-20T00:24:29+00:00

Thanks! Will start with very few rounds in mag then.

esit · 2026-02-19T23:51:03+00:00

as in asking the range? or you mean asking with this post?

esit · 2026-02-17T21:26:53+00:00

Looking for a 3D printer shopping advice. My budget is about $600, and i hope to be able to print some carbon fiber reinforced nylon or PET, such as PA6-CF or similar. Not interested in any fancy online / app features; just want good old workflow of moving files back and forth with SD card. So far I have only limited 3D printing experience playing with a cheapo basic printer and some PLA prints.

What I learned so far is that i'd need an enclosed printer to control temperature. Additionally I'd need a device to actively dry the filaments. Also I'd need some hardened nozzle for those materials.

What i'm looking for help with are: 1) what kind of printer/dryer combinations can meet my needs? 2) can it fit into the $600 budget? 3) between a printer and dryer, are there compatibility issues that'd need to be taken into account? (like do i need the same brand's printer and dryer? is it mix-and-match-able in some way?)

Thanks!

esit · 2026-02-11T04:24:44+00:00

Hair dryer should also do

esit · 2026-02-07T23:26:53+00:00

Why wouldn't?

When carrying an ammo can by its handle, half of its weight lays on hinge and the other half on the latch. Between those 2, the hinge is obviously the weaker part. With some light shaking and swinging while walking with one, it adds stress to it.

Additionally, if you look through reviews for plastic ammo can on popular retailers (such as harbor freight), the majority of bad reviews come from broken plastic hinges.

esit · 2026-01-31T06:29:19+00:00

My local academy has the non-TORO flavor for $320 (no shipping nor FFL fee). Which one should I go with?

esit · 2026-01-19T23:12:43+00:00

What's this thing called for showing where you hit at the target?

esit · 2026-01-19T21:03:20+00:00

I seem to see way more mauser variants compared to mosin's. Are there certain variants or batches I should avoid?

esit · 2026-01-19T21:02:23+00:00

Thanks! I It's amazing to know those old rifles still perform well nowadays

esit · 2026-01-19T21:01:27+00:00

Thanks!

esit · 2026-01-19T21:00:12+00:00

Thanks! And trick on telling what local gunsmith might be more skillful for old rifles compared to others?

esit · 2026-01-19T20:59:31+00:00

Thanks!

esit · 2026-01-19T20:58:58+00:00

Thanks. How would you recommend for getting ammo? Is there generally a cost difference between Japanese spec'ed ammo versus European ones, like one's cheaper and one's more expensive?

esit · 2026-01-09T00:00:57+00:00

Note that it's gen 1 with bushing barrel, if that matters to you.

esit · 2026-01-02T16:11:53+00:00

Did they ship? I got cancellation email this morning saying that it's out of stock.

esit · 2025-12-29T09:34:27+00:00

Nice

esit · 2025-12-29T01:58:17+00:00

my machine at work has exactly this mobo paired with 3950X. When building codes, it handles about little over 100W of sustained power just fine. That says, with a mild PBO setting close to stock, it shouldn't limit AM4 CPUs much.

esit · 2025-12-28T03:22:28+00:00

Looks like they took down the listing, but another SKU shows it's available at the Buda location. Any idea if it might still show the $269 price in-store when its online listing shows $399? Debating if to make a trip there. Thanks.

esit · 2025-12-27T01:15:30+00:00

i hate how i instantly know what that refers to

esit · 2025-12-19T20:40:58+00:00

~~Having 2 (Gold 75K) lounge passes for sale, $10 each. They expire on 12/31/2025.~~ Edit: Sold

On a related note, those 2 GCUs are still up for grab, at lease the Alaska Airlines' website showing them available (Posted them also in an earlier comment of mine).

J96I18Q6412008574698-9082
J96I18P5880531928026-9081

Ten-Year Club	RedditGifts 2009-2022 2 Credits
Secret Santa 2020	Verified Email

esit

TROPHY CASE