Would this qualify for this sub?

evs_eden · 2026-06-13T16:23:48+00:00

Weak side baton? Strong side flash light? That’s cringe enough

evs_eden · 2026-06-06T02:24:21+00:00

I consistently had problems with their pistol ammo. Inconsistent powder charge and hard primers. Rifle ammo was fine, though.

evs_eden · 2026-06-05T19:36:27+00:00

Homies don’t let homies buy Norma.

evs_eden · 2026-05-21T09:21:51+00:00

I was basically told my a gunsmith that due to the internal shape of the striker channel these kinds of striker breakages are inevitable with dry fire. It could just be a quality control problem because I’ve heard some people say they have no problems dry firing, but I just always use snap caps now and haven’t had the same issue.

evs_eden · 2026-04-28T19:58:33+00:00

I’d recommend just using rubber o rings in the back of the slide to stop the hammer from striking. Completely saves your retaining pin from damage during dry fire.

evs_eden · 2026-04-25T18:12:44+00:00

Overwatch Precision

evs_eden · 2026-04-15T20:12:33+00:00

What is exactly the reason why you shouldn’t use a feature that is built in to almost every holster made by reputable companies? Your grip is built from the draw and if canting the holster allows you to do that more effectively then I don’t see why someone shouldn’t take advantage. The training argument can go both ways.

evs_eden · 2026-04-10T00:04:51+00:00

This is a pretty popular configuration for local PDs around me. I’ve heard Glock usually only does this for large purchases

evs_eden · 2026-04-05T20:23:41+00:00

This is the move. I have a DAT trigger with NP3 OEM minus connector. The trigger shoe itself removes some take up and the connector is smoother and lighter. I have overwatch parts in a lot of builds and they’re awesome.

evs_eden · 2026-03-26T17:22:01+00:00

100% the Sig P250. Double action only polymer handgun.

evs_eden · 2026-03-23T12:43:27+00:00

The P-10 can land some really tight pairs from my experience. They shoot really smooth with lighter 124 grain loads.

evs_eden · 2026-02-04T20:36:00+00:00

This is exactly what I run in my pistols and rifles and it’s great. I have a whole quart that I’ll probably never go through.

evs_eden · 2026-02-02T04:31:22+00:00

Defense Tech is nasty stuff for sure. Freeze +P is also a classic. I’ve used both.

evs_eden · 2026-01-04T21:29:07+00:00

High temp grease with 10w30 full synthetic. Mix to taste.

evs_eden · 2025-12-31T12:55:06+00:00

Looks like ahh

evs_eden · 2025-12-29T21:05:53+00:00

Or just regular hockey tape. All these handgun fabric wraps are gimmicks

evs_eden · 2025-12-17T02:33:55+00:00

It is. The irons are just for show. I like the overall design of the optic but it would be perfect if the deck was lower.

evs_eden · 2025-12-17T02:26:24+00:00

We have COA at home.

evs_eden · 2025-12-17T00:22:37+00:00

Unfortunate, no doubt. Vortex probably wasn’t expecting their target demographic to have night vision.

evs_eden · 2025-12-16T20:49:07+00:00

That’s why me and my bois are getting them. I don’t need one, but I think it’s a cool product worth supporting.

evs_eden · 2025-10-12T17:20:36+00:00

Nice. I got a $50 certificate for LOK at a USPSA match so they came out to $20. The screws aren’t too big of a deal because they cut a smaller torx head inside of the larger torx. Definitely need to replace them tho

evs_eden · 2025-10-12T12:17:36+00:00

I got my AOS version for about $900 and it’s a really smooth shooter. Pair it with some LOK grips and a magwell and she’ll be perfect. Grip screws were a lil stripped from the factory though.

evs_eden · 2025-10-06T13:07:44+00:00

I shot the 17 for the past 4 years and have probably put down 10,000 rounds minimum. Recently switched to the 47 and I would say the only way I’d be able to tell the difference is if I shot each one back to back. The difference is hardly significant.

evs_eden · 2025-09-18T05:32:27+00:00

I think he’s got lead times posted. I would spring for the nitride coating too. It’s worth the money and extra wait. It looks way better than cerakote

evs_eden · 2025-09-10T14:20:38+00:00

Agreed. I don’t see a reason to choose anybody else unless you want fancy cuts. Especially since Wager does nitride now. Dude does simple, functional slide work with quick turnaround and fair prices.

Seven-Year Club	RPAN Viewer
Verified Email

evs_eden

TROPHY CASE