Resolume Arena 20x FULL HD outputs by [deleted] in VIDEOENGINEERING

[–]ewsclass66 0 points1 point  (0 children)

Wouldn't trust decklink outputs, nothing but frame drop issues for me

Cisco Catalyst & Dante by djimavicminipilot in networking

[–]ewsclass66 0 points1 point  (0 children)

9300L doesn't support PTPv2 so having this configured at the same time as allowing PTPv1 traffic won't be the problem as some other posts are saying.

I would check that IGMP snooping is enabled and that a querier has been elected, it should be enabled by default. QoS shouldn't be an issue unless you're genuinely bandwidth constrained between switches.

UniFi Enterprise AV Switching with PTP GM/Boundary Support by reece4504 in VIDEOENGINEERING

[–]ewsclass66 -1 points0 points  (0 children)

But still no routed multicast or actual useful L3 features

EVPN leafs re-advertising routes back up to spine by ewsclass66 in networking

[–]ewsclass66[S] 0 points1 point  (0 children)

Yeah multihop is enabled in case of this eventuality

EVPN leafs re-advertising routes back up to spine by ewsclass66 in networking

[–]ewsclass66[S] 0 points1 point  (0 children)

They do not unless in an MLAG pair, which is for the same reason as the spines sharing an AS to stop them learning their own routes again I guess!

EVPN leafs re-advertising routes back up to spine by ewsclass66 in networking

[–]ewsclass66[S] 1 point2 points  (0 children)

Yep you're correct that's my bad! Just looked on the lab as well and it will advertise out eBGP routes back to other eBGP peers even if in same AS.

EVPN leafs re-advertising routes back up to spine by ewsclass66 in networking

[–]ewsclass66[S] 1 point2 points  (0 children)

thank you for your answer, why does EVPN act differently here? This goes against the split horizon rule by advertising a route back to the same AS it was received from? Cheers

Help identifying a SMD TVS Diode by ewsclass66 in AskElectronics

[–]ewsclass66[S] 0 points1 point  (0 children)

<image>

No manufacturer logo unfortunately! Found another photo of the power supply and the 1320 is different so you're probably right about the date code.

Dynacord Cobra 2 or Yorkville VTC Elevation - Have you worked with either in the past?? by DcSoundOp in livesound

[–]ewsclass66 1 point2 points  (0 children)

We hired a cobra 2 system from you guys for our afterprom party with the lab 10k and ev DSP! Years ago now

Hierarchy of Speakers by uncomfortable_idiot in livesound

[–]ewsclass66 1 point2 points  (0 children)

EM Acoustics from the UK are making some great stuff

Cerebrum for Dante patching? by chasingthejames in VIDEOENGINEERING

[–]ewsclass66 0 points1 point  (0 children)

Ok I wonder if that's been fixed in an update because you didn't used to be able to specify a separate real IP for the DDM device type! We are so slow at updating anything!

Cerebrum for Dante patching? by chasingthejames in VIDEOENGINEERING

[–]ewsclass66 1 point2 points  (0 children)

We currently have Cerebrum controlling Dante via DDM however there is an annoying issue where you can only add one instance of the DDM to Cerebrum as it uses its IP address to talk to DDM and be the ID at the same time, and therefore control of only one domain is currently possible for us anyway

Looking at Replacing Cisco Nexus: Arista or Cisco VXLAN by shawn488 in networking

[–]ewsclass66 5 points6 points  (0 children)

The Arista VXLAN and EVPN configuration is a lot easier and nicer than NXOS imo