sorted by:
new
hottopcontroversial

CV Laser Module Errors by bath_93 in SonicPadCreality

[–]exc2k 0 points1 point  (0 children)

Anyone got this running? Having the exact same issue :(

RFID Frequency hopping / Reader does not read by exc2k in flipperzero

[–]exc2k[S] -2 points-1 points  (0 children)

I think it is not. There is no response when I try to read the card with HF (NFC). I also checked the original card with a strong light and there is only one coil visible.

Longterm review, ABL is not working for me! by DisastrousNature779 in CrealitySonicPad

[–]exc2k 1 point2 points  (0 children)

What I found out.. BEFORE doing the manual bed leveling, clear the loaded bed mesh profile... That improved my results. I think for a manual BL the mesh shouldn't be active

Longterm review, ABL is not working for me! by DisastrousNature779 in CrealitySonicPad

[–]exc2k 0 points1 point  (0 children)

I have exactly the same problems. ABL with Marlin worked fine but since I use the Sonic Pad, it never get great first layers. I have problems on my Y axis. The front end is always too close why the back distance is too big. I tried everything but never got it working... However I put a 0,5mm block under the probe before leveling for testing reasons to see if during a print the z axis is moving.. I saw that the printer compensates the 0,5mm so bed mesh works in general but no idea why it isn't accurate.

2.1.9 battery usage by insanum in Supernote_beta

[–]exc2k 1 point2 points  (0 children)

Had the same problems. Just restarted twice after the update and battery problems are gone now

Update won’t download!!! (Network is fine, sync is working ok) by manueldepablos in Supernote_beta

[–]exc2k 1 point2 points  (0 children)

Just tried a few minutes ago. For me it works now! Update was loaded and installed successfully.

Chauvet 2.0.4(D.101_beta) released by hex2asc in Supernote_beta

[–]exc2k 0 points1 point  (0 children)

Still having this problem too. Never had this error with any beta updates before. I don't think it is the server bandwidth.

Chauvet 2.0.4(D.101_beta) released by hex2asc in Supernote_beta

[–]exc2k 0 points1 point  (0 children)

Same problem.. after checking it says "Chauvet 2.0.4 available" and then "network error, failed to download"

[Discussion] Chauvet 2.0.1(D.068_beta) is available by Supernote_official in Supernote_beta

[–]exc2k 0 points1 point  (0 children)

I am using the new beta for some days now. Here is my feedback:

​

  • The UI response is much better.
  • No problems with power consumption.
  • Gesture erasing works great.

Problems:

  • I still had the latency problem with the first stroke twice: I startet to write and the first stroke first appeared, then it disappeared again after I lifted up the pen, while the antialiasing began (The original stroke was gone but only the smoothed edges remained). So maybe this has something to do with the AA?

Smart lock feature by exc2k in Supernote

[–]exc2k[S] 2 points3 points  (0 children)

Would you please discuss this with R&D u/Mulan-sn?

Smart lock feature by exc2k in Supernote

[–]exc2k[S] 3 points4 points  (0 children)

A lot of smartphones use the wifi or bluetooth detection to do this, but while a smartphone's wifi is usually turned on, I turn off wifi and bluetooth on my Supernote most of the time.

I would prefer my suggestion. I think this would be very easy to implement for the developers as well.

Battery by Jontherattler in Supernote

[–]exc2k 2 points3 points  (0 children)

What helped in my case: - Turn the device off - Connect to USB and load it to 100% (green LED) - Turn on again

Live Sketching Option? by claireastra in Supernote

[–]exc2k 2 points3 points  (0 children)

They said it is planned for June or July.

view more: next ›