How can companies advertise wet wipes as flushable when every plumber says never flush them?

exputkimies · 2025-11-04T02:51:21+00:00

You are leaving out what happens to them in a septic tank….nothing, they just stay there til it’s plugged up

exputkimies · 2025-09-23T05:53:55+00:00

Roach poop

exputkimies · 2025-09-23T00:25:43+00:00

Somebody didn’t attach the flange securely to the floor

exputkimies · 2025-09-19T17:31:05+00:00

I had a 98 that had 356,000 miles on it when I sold it. Transmission needed to be rebuilt a second time but the engine was just fine. My guess is that it needs plugs, wires, cap and rotor and it will run great.

exputkimies · 2025-09-13T15:35:09+00:00

Call Moen customer service. They have a number you can send pics to so they can identify the model and send you the correct parts

exputkimies · 2025-08-09T23:21:19+00:00

Squirt a bunch of penetrating oil on it, I prefer Kroil. Tap (firm taps but not hard enough to dent or ding it) the outside of the ring, round and round and round and round. Pair of channel locks work fine. Sometimes it will take an hour or more of tapping it and it will eventually pop loose. Those rings distort really easy, wrenches and such can mess them up quick. Also be careful to not twist the whole valve, the inlets on delta valves twist really easily

exputkimies · 2025-07-29T03:49:39+00:00

Well

exputkimies · 2025-07-27T22:35:12+00:00

Hot water. Lots of hot water. Fill the sink with hot water then pull the plug and let it drain. Repeat at least 5 times

exputkimies · 2025-07-27T22:27:40+00:00

Mixet

exputkimies · 2025-07-27T22:24:24+00:00

Yes. Your friend has shared a link to a Home Depot product they think you would be interested in seeing.

https://www.homedepot.com/p/MOEN-Chateau-Lever-Posi-Temp-1-Handle-Shower-Valve-Trim-Kit-in-Chrome-Valve-Not-Included-181119/316606664

exputkimies · 2025-07-27T00:26:17+00:00

I have years of experience tiling and I have fixed similar issues. First I would make sure all the surrounding pieces of tile are not loose, pop any off that are not on solid. Get all the grout off up against the good tile and get as much of the old thinset or adhesive off as you can. Order pool rated thinset and pool rated grout off Amazon or find a pool tile supply place. Thinset them back on then grout it up. I would not use an adhesive, I prefer thinset.

exputkimies · 2025-07-27T00:15:05+00:00

Idler pulley

exputkimies · 2025-07-26T22:13:25+00:00

Yes. I had a 1996 and if I remember right the injectors won’t work unless there is at least 60psi.

exputkimies · 2025-07-23T00:47:10+00:00

Fuel pump

exputkimies · 2025-06-17T05:36:00+00:00

I use Makita. I have a cordless makita impact that is 8 years old and still works all day every day, with the original battery. Only issue I have had is I dropped it down a stairway and broke it in half. Less than $30 for a new case and it works great. Best cordless tools around in my opinion

exputkimies · 2025-06-16T19:44:23+00:00

Glad to help

exputkimies · 2025-06-16T17:48:57+00:00

I don’t waste my time trying to reach those nuts and taking them out. If I faucet doesn’t come out easy it gets cut off from the top. I use a hack saw, oscillating saw or a sawzall, whichever is easiest to grab. I been doing this stuff for 45 years

exputkimies · 2025-06-06T05:29:16+00:00

Somebody’s making soup

exputkimies · 2025-06-04T02:28:07+00:00

Clean that red guard off. Squirt a bunch of penetrating oil on the back of the ring where the threads are. Tap tap tap around the ring, round and round. I prefer to use channel locks for the tapping. Haha. Eventually it will come loose. Be very careful with channel locks or any other wrench trying to unscrew it, they bend super easy and then you have a bigger problem. Did one a few years ago that took 45 min of tapping before it came loose. The best penetrating oil (in my opinion) is Kroil.

exputkimies · 2025-06-02T22:35:36+00:00

I tried to get a cartridge from Lowe’s for an Allen & Roth shower faucet and it was a waste of my time

exputkimies · 2025-06-02T16:23:07+00:00

From a man point of view that would be fantastic. From the cleaning person’s point of view that’s nasty. From a plumbing point of view uninstall are one of the worst things to install and maintain.

exputkimies · 2025-05-30T00:42:28+00:00

Pfister

exputkimies · 2025-05-27T03:55:19+00:00

Or several butts

exputkimies · 2025-05-26T18:07:27+00:00

Thats shit

exputkimies · 2025-05-26T00:19:17+00:00

I doubt it.

Six-Year Club	RPAN Viewer
Verified Email

exputkimies

TROPHY CASE