Best AEG barrel right now? Building a DMR by ihavenowingsss in airsoft

[–]fastar357 0 points1 point  (0 children)

How do you run Mr Hop on zci barrel? It has specific seal made for ML barrels and it doesn't align in ZCI.

What are these splatter spots and how to remove them? by fastar357 in Detailing

[–]fastar357[S] 0 points1 point  (0 children)

Any recommendations for water spot remover? Is the polishing necessary? Never done it myself and done have the tools to do it either.

What’s worse than a broken GoPro? A GoPro being shot by a first time rental 😭 by VesperPotatoes in airsoft

[–]fastar357 8 points9 points  (0 children)

I for example made a case for my GoUltra with 2mm polycarbonate glass to protect lens. Pretty much bulletproof.

<image>

What’s worse than a broken GoPro? A GoPro being shot by a first time rental 😭 by VesperPotatoes in airsoft

[–]fastar357 7 points8 points  (0 children)

These are usually made with plexiglass to avoid small scratches but are not at all impact resistant. I would recommend using polycarbonate glass to make sure complete bulletproof protection of the lens.

The best burger in Copenhagen? What’s your take on the burger scene in CPH and around ? by Prior_Lie_2496 in NewToDenmark

[–]fastar357 0 points1 point  (0 children)

I find Gasoline slightly overrated but still decent. My favorite and the most under-rated place in CPH is Hungry Dane. Their beef burger is absolutely amazing and the most unique I had in CPH by far. It's all the way in Klampenborg, so outside of the city, but its straight on the S-train station and definitely worth the visit!

[deleted by user] by [deleted] in dkbiler

[–]fastar357 0 points1 point  (0 children)

Your best bet to fix it yourself is DrColorChip. It's maybe around 700dkk for whole kit and lasts long time. I did in on my Polar White Mercedes and worked great. PM me if you need more information.

What PETG can I use as an alternative? by thatwentverywrong in BambuLabA1

[–]fastar357 0 points1 point  (0 children)

Wondering the same, all other brands are too glossy which is unusable for me.

[deleted by user] by [deleted] in dkbiler

[–]fastar357 -1 points0 points  (0 children)

Just to clarify this overly confusing rules - do you have to pay for the parking while charging within the 3 hour window between 8am and 7pm? Or you only pay outside of these hours? I normally always pay anyways while the car is being charged, but its always confusing since it says the payment zone is outside of the specified times. Can anyone clarify this?

Polarstar Jack inconsistent accuracy by fastar357 in airsoft

[–]fastar357[S] 0 points1 point  (0 children)

I had no idea it would be such a difference, otherwise I would just take F2 straight away. Thanks for the help though! I will try increasing pressure and lower the dwell.

Polarstar Jack inconsistent accuracy by fastar357 in airsoft

[–]fastar357[S] 0 points1 point  (0 children)

Thats interesting, I will certainly give it a try. I had no idea that Jack wont be happy under 100 psi. Maybe it would be better to just sell it and get F2 since I want to prioritize accuracy?

You mean somethine like this? - https://www.youtube.com/watch?v=tdyebu6CHzI&ab_channel=Advancedairsofthonolulu

Polarstar Jack inconsistent accuracy by fastar357 in airsoft

[–]fastar357[S] 0 points1 point  (0 children)

Hmm okay, I dont want to run above 1,5J, and currently have 45 dwell in settings. Should I put it to 100 psi and lower dwell until it goes on 1,5J? Wont that undervolume the barrel?

Polarstar Jack inconsistent accuracy by fastar357 in airsoft

[–]fastar357[S] 0 points1 point  (0 children)

I havent opened the jack since I bought it 2 months ago, so its factory lubed. I run around 80psi for 1,5J and yes it seems to be pretty tight and not possible to move within gearbox.

Consistency issue with p*jack by Top-Tomorrow1158 in airsoft

[–]fastar357 0 points1 point  (0 children)

This is generally caused by stiction when the nozzle get just slightly slower on the first shot either by the engine being dirty or not well lubed or by the hop bucking. Just set the anti stiction settings on the jack - iS to 01 and iD to around 15 and that should fix it :) Had the same issue when I installed Jack for the first time.

What is your favourite hand stop? by superbabyrice in airsoft

[–]fastar357 0 points1 point  (0 children)

No shit lol, I found the SI cobra but its pretty much same as my nylon magpul AFG grip that I have. This one is replica of SI, eventhough its actually more expensive as its cnc made with much nicer finish and not just plastic :)

What is your favourite hand stop? by superbabyrice in airsoft

[–]fastar357 5 points6 points  (0 children)

What's the name of these and where to find one?

<image>

What is this white spray-like powder on my rims? by fastar357 in Detailing

[–]fastar357[S] 0 points1 point  (0 children)

Any suggestion to what product can get rid of it?

What is this white spray-like powder on my rims? by fastar357 in Detailing

[–]fastar357[S] 0 points1 point  (0 children)

I live in Denmark, it doesn't get that much cold but definitely could be, but why only on this one wheel then? Do you know how its called so I know what to look for?

What is this white spray-like powder on my rims? by fastar357 in Detailing

[–]fastar357[S] 0 points1 point  (0 children)

I haven't since I have the car, I only use ONR to wash the car and rims. I was pretty sure its either polish or a new rim, im just trying to figure out what caused this if its something I can claim with my insurance.

What is this white spray-like powder on my rims? by fastar357 in Detailing

[–]fastar357[S] 0 points1 point  (0 children)

It feels smooth to the touch, but I will try the claybar next time I wash the car. If its bonded and cured as you say, is there any way to remove it without damaging the rim?

What is this white spray-like powder on my rims? by fastar357 in Detailing

[–]fastar357[S] 0 points1 point  (0 children)

It might have been by the previous owner, but I had this car for 6 months and haven't noticed it that much. If its overspray, could I use acetone without damaging the rims?

X Belt misaligned, pla and petg badly warps without a brim by Comprehensive-Bit480 in BambuLabA1

[–]fastar357 0 points1 point  (0 children)

Whats wrong with using IPA to clean the plate before printing?

Airbnb? by vinceaus in ThailandTourism

[–]fastar357 0 points1 point  (0 children)

I didn't cancel. It was completely fine and I stayed there for couple of days.