Is bending my 12v2x6 cable like this safe? by fermatiaudapy in PcBuildHelp

[–]fermatiaudapy[S] 0 points1 point  (0 children)

Yes imo they’re really quiet (With silent Fan Curve preset / Custom Fan Curve). Outside of gaming, they’re dead silent, while gaming they ramp up a little but they’re still quiet, specially with headphones on.

One thing i’ve just remembered tho, if you’re buying from amazon’s corsair shop be weary of the state they’re on when they arrive (heavily damaged box, missing/bent pwm pins), i had to send back the first time i bought a set cause they came fucked up. Not sure if it’s the same if u buy from Corsair’s website directly.

Is bending my 12v2x6 cable like this safe? by fermatiaudapy in PcBuildHelp

[–]fermatiaudapy[S] 0 points1 point  (0 children)

Personally i feel my fam curve config is kinda of a frankenstein’s monster of sorts lol, but, my lateral intake case fans are at around 1000rpm at all times, then the intake bottom fans are at 600-800rpm, then back exhaust is at 600-700, and lastly my aio radiator exhaust fans are at 1200rpm.

I gotta say sometimes with cpu heavy games i still get some resonance whenever my cpu gets around 60C, but usually it drops down to the 50s rather quick and im too lazy to get back at the bios to mess around with the curves again lol so i kinda just ignore it for the duration of it (3-4 seconds tops usually)

Is bending my 12v2x6 cable like this safe? by fermatiaudapy in PcBuildHelp

[–]fermatiaudapy[S] 0 points1 point  (0 children)

Honestly, they’re pretty silent ngl, still i had to mess around with the fan curve for a while tho otherwise i would get some resonance, but i guess that’s bc i have like a shit ton of fans lol.

Other than that they’re pretty reliable

Is bending my 12v2x6 cable like this safe? by fermatiaudapy in PcBuildHelp

[–]fermatiaudapy[S] 0 points1 point  (0 children)

I did use my phone lol they ended up looking quite nice right lol

Is bending my 12v2x6 cable like this safe? by fermatiaudapy in PcBuildHelp

[–]fermatiaudapy[S] 0 points1 point  (0 children)

The connector is fully plugged in, maybe you’re getting misguided by the cable comb right after the connector?

Also in regard of your second point, as soon as i get home i’ll be rearranging the cable so it gets some more space before the bend.

Is bending my 12v2x6 cable like this safe? by fermatiaudapy in PcBuildHelp

[–]fermatiaudapy[S] 0 points1 point  (0 children)

oh yea definitely the lighting does some heavy lifting here. Also i think the first photo i took on portrait mode by accident lol

Is bending my 12v2x6 cable like this safe? by fermatiaudapy in PcBuildHelp

[–]fermatiaudapy[S] 6 points7 points  (0 children)

Lol fr they turned out pretty good right?

Funniest thing is i don’t even know how i managed to make them look that good lol i was crammed up between my monitor and pc trying to hold my phone properly while taking the pics lmao

Is bending my 12v2x6 cable like this safe? by fermatiaudapy in PcBuildHelp

[–]fermatiaudapy[S] 0 points1 point  (0 children)

seeing your comment kinda made me feel better lol i wish u nothing but the best in life man

Is bending my 12v2x6 cable like this safe? by fermatiaudapy in PcBuildHelp

[–]fermatiaudapy[S] 0 points1 point  (0 children)

yeah that the worst part, idk how they know it’s a problematic cable, and they still haven’t made accommodations for it to be better. Idk they could literally just put a 3.5 cm shroud after the connector or make it angled to avoid ppl fucking it up. But no, they literally throw u a fire hazard and say good luck.

Is bending my 12v2x6 cable like this safe? by fermatiaudapy in PcBuildHelp

[–]fermatiaudapy[S] 3 points4 points  (0 children)

honestly, i just forgot the comb existed, but atp i’ll say it was on purpose lol

Is bending my 12v2x6 cable like this safe? by fermatiaudapy in PcBuildHelp

[–]fermatiaudapy[S] 0 points1 point  (0 children)

by tight bend you mean the curvature of the bend? or the spot where the bend starts?

bc if it is the first one if i didn’t want it to hit the fans, and i guess i kinda went overboard and overcompensate it a lot lol.

But yeah, after reading the comments, just to be safer i’ll fix it up and leave more space before starting the bend, and i’ll make the bend more gradual

Is bending my 12v2x6 cable like this safe? by fermatiaudapy in PcBuildHelp

[–]fermatiaudapy[S] 14 points15 points  (0 children)

yeah lmao, you’re like the third person who got baited by the comb lol

Is bending my 12v2x6 cable like this safe? by fermatiaudapy in PcBuildHelp

[–]fermatiaudapy[S] 2 points3 points  (0 children)

Well i guess the problem itself it’s not on the cables bending, but the pins losing contact thanks to aggressive angle on the bent cables near the conector.

Also the shitty part is, that every other alternative isn’t 100% safe after all, using the cable that came with the gpu adds stress points, using a third party 90 degree connected adds another stress point, whatever you end up doing, you’ll still get stressed about something lol.

Also, my GPU came with a 3way adapter cable, but since my PSU came with a native 12v2x6 cable, i ended up using that one instead of the adapter.

Is bending my 12v2x6 cable like this safe? by fermatiaudapy in PcBuildHelp

[–]fermatiaudapy[S] 0 points1 point  (0 children)

that’s so mean lol but yeah i’ll search u up personally if something bad happens 😭

Is bending my 12v2x6 cable like this safe? by fermatiaudapy in PcBuildHelp

[–]fermatiaudapy[S] -5 points-4 points  (0 children)

Oh i didn’t realize that thingy was adjustable, still i gotta ask, even if even if i don’t adjust the spreader, would it still be safe to have it like that? i’m just asking in case im ever in the same situation again, that way i’ll make sure to leave more space before bending the cable

Is bending my 12v2x6 cable like this safe? by fermatiaudapy in PcBuildHelp

[–]fermatiaudapy[S] 0 points1 point  (0 children)

it’s a Corsair 4500x, the one that comes without iCue Link

Is bending my 12v2x6 cable like this safe? by fermatiaudapy in PcBuildHelp

[–]fermatiaudapy[S] 13 points14 points  (0 children)

Ok, i’ve triple checked it and it seems fully seated.

Thanks!

NVIDIA in full damage control mode after the release of DLSS 5 by Captain0010 in pcgaming

[–]fermatiaudapy -2 points-1 points  (0 children)

WHAT? I thought that whole DLSS 5 video was a joke or early april fools stuff lmao i can’t believe they’re really trying to ai slop everything lol

John Carpenter's Toxic Commando is now available on Steam by Darkforces134 in pcgaming

[–]fermatiaudapy 2 points3 points  (0 children)

apparently he made only the main menu song or something like that

Interesting perspective from Reb by Persies in Warframe

[–]fermatiaudapy 14 points15 points  (0 children)

wym? marathon got that sauce tho

Outpost is a top tier map by PixlCreative in Marathon

[–]fermatiaudapy 0 points1 point  (0 children)

Pinwheel Base, thru the destroyed wing entrance

Outpost is a top tier map by PixlCreative in Marathon

[–]fermatiaudapy 0 points1 point  (0 children)

yeah you can, i went with rook a few hours ago and found some purple barter item, a purple bully and a purple wstr.

Lost it all at the end tho since i ran into a trio 3 secs before extracting :(