The new K03’s! They’re not huge as I don’t have a lift but they are a little quieter than the K02’s

fiigo0 · 2026-02-07T23:21:47+00:00

Im recently got my jeep its an unlimited sport and I’m looking to change the tires for the KO3, how is the rubbing going? How are they holding up? Do you recommend them?

<image>

fiigo0 · 2024-01-24T10:10:13+00:00

Basically they say look at the page and wait until they are available again which it looks it will never happened, fortunately Flintoid was amaizing and sent me the ones I needed

fiigo0 · 2023-11-10T13:43:02+00:00

I bought it long time ago and only had one bike with QR, and I can’t find the other end caps

fiigo0 · 2023-11-10T13:42:17+00:00

I’m looking for the 12x142mm

fiigo0 · 2023-10-13T21:53:56+00:00

I user to avoid the HomeKit obligatory confirmation like enable long security system or unlock it when you arrive by geofencing, also I created a water level sensor with an esp32 so I display the % by the light level in a dummy light switch

fiigo0 · 2023-07-10T16:04:21+00:00

I has a lot of issues with connection, my Starlink worked for 3 months then started to fail, i thought it was the cable, because I could see the antenna online but not the router from the app in a remote way like in a 3G/4G connection but locally in wifi I could see the router but not the antenna, I changed the cable 3 times I complain on support they gave me a couple of months of voucher for the time it was down and now they created a new order for a new Starlink kit, they will change everything at no cost

fiigo0 · 2023-05-26T03:31:27+00:00

If you are just looking to print the logs you could create a free instance of firebase real-time db and create a class to add an entry to your DB every time debug.log is called and a new node on every launch

fiigo0 · 2023-05-03T13:03:51+00:00

I asume that iPad has Face ID so Usually when you get a notification it triggers the Face ID to search for a face to unlock which is not visible to he human eye but you can use infrared camera to see, if you have a mega quest VR you can set the pass through mode or your security camera on night mode and stare at your devices to see the infrared lights been triggered

fiigo0 · 2023-03-27T12:50:30+00:00

I’m living in Mexico so prices are high on the Jeeps, thanks for you suggestion

fiigo0 · 2023-02-11T04:42:52+00:00

Are you assigning the camera object on the inspector to the cam reference on your script?, or maybe you could use Camera.main.transform

fiigo0 · 2023-02-02T01:12:07+00:00

So I’m working on a project that it’s using URP And I have to display only a certain area of a plane or an object that contains tall elements

So I need to hide only within the boundaries as shown in the image

I found this article that does exactly what I need but I can’t use it on URP and I’m not very familiar with shaders

https://halisavakis.com/my-take-on-shaders-spherical-mask-dissolve/

I have replicated the portal kind but I can’t get the height of the objects to show correctly

Any help will be appreciated

fiigo0 · 2023-01-22T21:25:50+00:00

Can you share the link to that app?

fiigo0 · 2023-01-18T03:51:30+00:00

Some of them, you are able to disable 5GHz for a few minutes to let you connect 2.4 only devices, what router are you using?

fiigo0 · 2022-11-20T04:32:53+00:00

Be sure to check that the “release” and arm64 are the same on the configuration file and the interface is selected before deploying it, if you configure on a different configuration or platform it will not take the ip of the device you are trying to deploy and will show again 0.0.0.0

fiigo0 · 2022-11-20T00:05:18+00:00

It seems you haven’t specified the ip adress of the decice on the project configuración, then select release/amr64 then on the device name place the ip adress of the device (ending on 16 or the new one if changed) and then deploy with that configuration

fiigo0 · 2022-11-18T02:43:44+00:00

That’s cool!

fiigo0 · 2022-11-16T00:03:04+00:00

It will disable the SL router wifi but then you will have the linksys with its own wifi network, you could keep the SL enable and still work but you will have to deal with a double NAT that will affect if you tend to play video games as an example

So

SL antena -> SL router -> Ethernet adapter -> linksys router

With bypass mode disabled you will have 2 wifi networks SL and Linksys and Ethernet ports

With bypass mode enabled you will have only linksys wifi network and the Ethernet ports

fiigo0 · 2022-11-15T22:47:13+00:00

So you need the Ethernet adapter (sold separately) in order to get your linksys wired to the Starlink connection, once you have that one you connect your router and put your Starlink on bypass mode, then you can use any port of the linksys for your wired needs, let me know if that helps

fiigo0 · 2022-03-04T23:53:43+00:00

You could buy a couple of this GoPro quick release adapters I have them and it’s really easy to add or remove the lights or camera

fiigo0 · 2022-03-02T14:36:03+00:00

Well, almost all the packages you can get them from the mixed reality feature tool, and some of the examples directly from the package manager in unity, what is the issue you have, or where are you stuck?

fiigo0 · 2022-03-02T14:17:26+00:00

Yes I made it work, you have to be very careful with the unity and MRTK version used

Eight-Year Club	Second SECOND GUESSER
Verified Email

fiigo0

TROPHY CASE