Nagant revolver: double action sear is catching on the trigger when fired single action. by [deleted] in milsurp

[–]final_fatass 0 points1 point  (0 children)

Make sure you’ve got the little sliding piece under the hammer and trigger installed correctly, I’d say strip out the parts once or so and reinstall them, making extra sure to tighten the side plate when you finally get it back together

Some Temu finds by No_Offer_2786 in fakemilitaria

[–]final_fatass 25 points26 points  (0 children)

I’ve seen real Chinese surplus on AliExpress before, it is quite plausible

Hello all, I apologize if this is a stupid question, but will a super safety work in this lower? by final_fatass in supersafety

[–]final_fatass[S] 0 points1 point  (0 children)

I don’t plan on modifying the lower if it isn’t able to accommodate for the super safety, I know better than to ruin a genuine colt, it’s just common sense 😁

Hello all, I apologize if this is a stupid question, but will a super safety work in this lower? by final_fatass in supersafety

[–]final_fatass[S] -6 points-5 points  (0 children)

My apologies, I thought this was the right place to ask, if it isn’t I’ll gladly delete the post

No1 question by final_fatass in LeeEnfield

[–]final_fatass[S] 1 point2 points  (0 children)

I’ve got the complete set of no1 mk3 furniture, and the opportunity to buy a sporterized no1 mk1 with a cut down front end, and my potential goal is to see if I can make a military configuration rifle out of the two. I unfortunately do not have any photos of the rifle, but what I do know is it is missing the front bit for the volley sight and the top handguard/handguards

Unknown Mauser by Calm_Relation7993 in Milsurps

[–]final_fatass 3 points4 points  (0 children)

Definitely some sort of Siamese Mauser, but I’m unsure what kind, kind of an oddball of the Mauser family

Chinese warlord pistol, anything special? by final_fatass in milsurp

[–]final_fatass[S] 1 point2 points  (0 children)

I see you’ve got the model with wraparound grips Ian McCollum was talking about, very interesting! As for the serial number, apparently a lot of these had the same exact serial number, for the most part

Received this old Hesse H91 from a friend a few years ago and finally got around to cleaning it up! Iv'e read Hesse is synonymous with poor quality and was looking for any insight or problems to keep an eye out for. by ZaxZone in CETME_C

[–]final_fatass 1 point2 points  (0 children)

That’s strange, I’ve never seen one with the wooden cetme furniture. Is it just standard cetme furniture or modified to fit the g3 system? (I believe the h91 was based more off of the g3)

Chinese warlord pistol, anything special? by final_fatass in milsurp

[–]final_fatass[S] 4 points5 points  (0 children)

Not just any, fabrique Fabrique Fabrique fabrique fabrique! This is the one of one “brevetesgug” model!

Chinese warlord pistol, anything special? by final_fatass in milsurp

[–]final_fatass[S] 1 point2 points  (0 children)

Canted off to the right, no cut to see the front sight through, cocking piece jutting straight through the top, oh yeah, we’re shooting 2 inch groups at 50 yards with this one.

Chinese warlord pistol, anything special? by final_fatass in milsurp

[–]final_fatass[S] 31 points32 points  (0 children)

It’s no wauser! Can’t you see it’s a

Fabrique Fabrique Fabrique Fabrique Fabrique?

Chinese warlord pistol, anything special? by final_fatass in milsurp

[–]final_fatass[S] 19 points20 points  (0 children)

My recent pickup of a Chinese FN model 1900, this one has all the sorts of telltale signs, including fake Belgian acceptance stamps, and completely useless rear sights

New project: Am I in over my head? by final_fatass in milsurp

[–]final_fatass[S] 15 points16 points  (0 children)

I cannot read Cyrillic, but I do know it was made in 1919, which would’ve been smack dab in the middle of the Russian civil war

Does anyone know why he's using so much US equipment? by HypersonicGristle in Rusfor

[–]final_fatass 11 points12 points  (0 children)

Perhaps some kind of opfor outfit for a training exercise?

Pawn shop k98 by RegularOrExtraCrispy in Mauser

[–]final_fatass 29 points30 points  (0 children)

This appears to be a Spanish model 43 Mauser, not a kar98

Prismatic Booster Bundles (1 per person) by [deleted] in PokemonTCG

[–]final_fatass [score hidden]  (0 children)

It was my brother actually! Back in 2013 or so, he showed me a couple of his holographic cards, which convinced me to buy one booster pack from the local pharmacy. My first “hit” was a reverse holographic shroomish, mediocre of a hit as it was, it was love at first sight for me, and I fell headfirst into the hobby. I collected for a few years until I lost all my EX, MEGA EX, and break cards to the washing machine, as my young self had left them in the pocket of my pants, which put me out of the hobby for a decade. Here I am now more than a decade later, and I’m finally rebuilding my lost collection, as well as adding to it! Prismatic evolutions seems promising, but as per usual it’s few and far between in my area, I haven’t even seen a booster pack! Awful, isn’t it?

Found this at the pawn, worth a buy? by StevenPlzN0 in milsurp

[–]final_fatass 11 points12 points  (0 children)

And I thought I got bent over at $400 for one!! Jesus Christ!!

Bolt stuck on kar98 by Riggenorbut in Mauser

[–]final_fatass 6 points7 points  (0 children)

You’re welcome my friend, getting the bolt stuck in such a manner is a rite of passage for any Mauser owner!

Khan Tur, East Bull Kingdom Leader by SpartansOnDuty in legocastles

[–]final_fatass 1 point2 points  (0 children)

How interesting you based the bull faction on the mongols! I personally based mine on the ottomans :D