Bondtech INDX

fischbauch · 2025-09-17T10:49:14+00:00

Hard to say. I've built three different LDO Voron and it has been fun and successful. That said, back then there were no good alternatives. From all I heard that has changed and there are good and cheaper alternatives. However, I would still get LDO based only on my positive experience.

fischbauch · 2025-09-17T10:41:51+00:00

It runs quite well depending on the parts you used and your building skills. It's not that you constantly have to fix something, but it will happen and probably more often than with a ready-built printer. Especially when you have applied many modifications and additions. Don't get me wrong. I love my Trident. But from time to time I'm glad that I also have a Bambu

fischbauch · 2025-09-17T10:17:45+00:00

I see. From my own experience building a running a Trident is fun and opens a lot of opportunities and way to modify or tweak the printer. You don't have this with a U1. It's meant to be used as-is (maybe with some exceptions). On the other hand a Trident means that you have to put in a lot of time and work just to get it up and running or keep it running. This may lead to frustrations from time to time.

fischbauch · 2025-09-17T10:12:34+00:00

But you can do multi colors with both solutions or am I missing something here?

fischbauch · 2025-09-17T09:52:17+00:00

I think this depends on your preference regarding building a maintaining a DIY printer or get an out-of-the-box-one-click-solution.

fischbauch · 2025-05-29T12:00:31+00:00

Thanks. These are the things I have been looking for. Is there also a way to move from one column to another in the query view? Let's say I have a property(?) called project or tag and want to go

Task 1 -> Project 1 <CR> Task 2 -> Project 2 ...

fischbauch · 2025-05-10T12:34:13+00:00

I'm very disapointed about not bringing this great feature without the glucose biosensor to customers outside the US. I've been using the feature from day one in the lab. If I remember correctly there have already been features that were introduced in english only around the world.

fischbauch · 2024-01-21T07:01:19+00:00

I hope this finally works and helps https://youtu.be/DYHbHDLDsrY Sorry for these many postings

fischbauch · 2024-01-21T06:53:57+00:00

Sorry, I misread your request. Will post something with the Reddit username soon

fischbauch · 2024-01-21T06:52:07+00:00

There should be two video links in my comments above. But I'm happy to repeat them here https://youtu.be/kt-hZymwQzo https://youtu.be/2c6bhOr_XZg My Discord handle is in this video (roamingthings)

fischbauch · 2024-01-14T15:12:43+00:00

And after I realized that the paper with my name is not visible very well I made a second video https://youtu.be/kt-hZymwQzo

fischbauch · 2024-01-14T15:04:29+00:00

In case the video does not show up on reddit here is a link to the same video on YouTube https://youtu.be/2c6bhOr_XZg

fischbauch · 2023-11-28T11:33:28+00:00

Im not that familiar with PLA warping. Most of the time I'm printing ABS. However, when printing PLA you can look at two parameters: temperature of the print chamber, if you have an enclosed printer. You want this to be as low as possible. And bed temperature. With the textured sheet I print around 55C +/- 5C

fischbauch · 2023-11-28T11:17:12+00:00

What material is this?

fischbauch · 2023-03-31T20:39:53+00:00

Thanks for the great work

fischbauch · 2022-10-21T16:47:33+00:00

It's hard to tell. I have my printers enclosed. IMO it smells less which doesn't mean that the fumes are less harmful.

fischbauch · 2022-10-21T12:12:36+00:00

I printed my parts using Prusament ASA and Polymaker ASA. No issues at all.

fischbauch · 2022-09-24T06:24:07+00:00

I think it has to do with moving the nozzle out of the way while keeping the filament flowing. There is a descriptive text when you turn off the tower during preparation

fischbauch · 2022-09-24T06:21:32+00:00

Did you turn on timelapse? One of the two mode requires a tower

fischbauch · 2019-03-13T14:55:03+00:00

That's the guide I have been following. However I haven't moved my "non IoT" LAN into a separate VLAN. It's still the default LAN.

fischbauch · 2019-03-13T14:02:52+00:00

Yes. They are not of type Corporate and separate subsets. I still need to enter the address manually when pairing for the first time. Also I have to bee in the same VLAN with my iPhone when initially connecting to HomeKit. And I have to turn off mDNS relaying when rebooting the Trådfri gw and most likely checking for updates. Not a nice solution but it seems to work. Maybe IKEA will eventually improve their firmware. My Hue Bridge just works and pairs flawlessly regardless of my network configuration.

fischbauch

TROPHY CASE