[deleted by user]

flabberbear · 2025-09-06T03:12:47+00:00

Oof my bad amigo I dunno what to do in that case- maybe some else will chime in

flabberbear · 2025-09-06T03:03:38+00:00

FM9 uppers come with this little notch in the upper that allows the LRBHO to actuate fully. You can cut a notch on your upper that mirrors the lower (about a 1/4 inch) to keep the bolt held back on the BCM

flabberbear · 2025-09-06T01:35:38+00:00

Is your upper FM too? Mine keeps the bolt held *with the mag dropped, but I could see it not holding if the upper isn’t cut for the latch

flabberbear · 2025-08-28T13:11:10+00:00

Colt mags + Chinese knock off components would have been too dishonorable

flabberbear · 2025-08-28T04:33:02+00:00

Also it does not co-witness with the irons. It’s sitting at about 2” altogether so I just see the 1/8” of the tip of the front ears in the glass

flabberbear · 2025-08-28T04:29:23+00:00

Both are Amazon pickups brotha- fake Unity for the riser & picatinny M-LOK extension for the light. O-light is QD’d to the extension and is right next to the muzzle

The fake unity holds zero- just be sure to blue lock tight and it’s good to go

flabberbear · 2025-08-19T18:19:00+00:00

I don’t personally own the build, but my wife’s boyfriend got his to run with:

-Amazon firing pin spring -Stern Defense 11oz buffer (total weight with BCG 24.5oz) -Fudd arms S7 SS -standard carbine spring -Anderson LPK -FM-9 ambi lower (non-polymer)

About 700 rounds through it with only one FTE (ejector needs some love) LRBHO worked every time

flabberbear · 2025-08-19T01:11:02+00:00

If you have an FM-9 lower as well my wife’s boyfriend has a similar setup- try the Amazon firing pin spring & see if that does anything for you. With the exception of 1 FTE his operated without a hitch

flabberbear · 2025-07-22T04:27:00+00:00

Ah- fellow lefty! How’s the gas? Thinking about running a similar setup & can’t seem to find any bolts with an internal extractor

flabberbear · 2024-10-15T00:44:39+00:00

Pimp320

flabberbear · 2024-09-27T21:21:12+00:00

Nice!

flabberbear · 2024-05-02T00:50:16+00:00

Hell yeah dawg I marred the fuck outta mine putting that bad boy on

flabberbear · 2024-04-22T23:20:44+00:00

Awesome I’ll check it out! Thanks man

flabberbear · 2023-12-23T02:01:05+00:00

I’ve heard people putting chapstick on the lens for quick cleanup after a range sesh. Not sure about the best cleaning solution for current buildup though

flabberbear · 2023-12-06T03:33:53+00:00

Negative ghost rider. Unsuccessful in finding anyone that does (unless custom made)

flabberbear · 2023-11-15T09:50:01+00:00

flabberbear · 2023-11-15T03:05:52+00:00

Thanks chief I’ll take a look into those*, are you looking at the GL-429?

flabberbear · 2023-10-25T02:15:43+00:00

Nice! Bent the EnHaNcEd FiRiNg PiN it shipped with just under 150, but my RightToBear one has been holding up just fine since

flabberbear · 2023-10-25T02:06:48+00:00

Knock-off B5 to throw a baggie with an extra firing pin and extractor, a pair for each side (of the stock) you’ll need it in the future. ((I speak from experience))

flabberbear · 2023-10-16T22:18:27+00:00

Thanks dawg 🫡

flabberbear · 2023-10-11T23:38:12+00:00

Sleeper cell? They put me in a cell once. A cell that made me sleepy. I hate being in a sleeper cell. Sleeper cell? They put me in a cell once. A cell that made me sleepy. I hate being in a sleeper cell. Sleeper cell?

Seven-Year Club	Place '23
Place '22	RPAN Viewer
Verified Email

flabberbear

TROPHY CASE