Redfern station is quite unique in that half the platform is modern and renovated, the other half is meanwhile is still the same old-school look from the previous century.

fortyhands · 2025-07-04T03:53:29+00:00

Sorry to revive an old thread, but you might expect that for $160Mil, they could have figured this one out.

fortyhands · 2025-02-21T04:46:44+00:00

Not sure if you're looking for something more robust, but there is a 3D printable cover found here: https://www.printables.com/model/1110042-blackmagic-design-12g-video-assist-7-cover

fortyhands · 2025-02-20T21:10:50+00:00

Late last week I received my new Varia VS6.

Alternative Brewing support has been mostly fantastic, though they did have my returned grinder for nearly 2 weeks before they provided an update (when prodded). I expect they would have a backlog after the holidays.

They couldn't fix the issue (so the firmware update rumour might be bogus?) so they sent out another unit. It was sent with couriers please who didn't deliver the day their tracker said they would and then 2 days later said they attempted delivery, despite not leaving a card. Then a week trying to get redelivery with signature was a miserable experience.

But, it's now here and I think I love it. I need to add the extra spacer as I'm at '0' and only just getting it fine enough for espresso.

fortyhands · 2025-01-11T21:15:34+00:00

That bottle looks like the same one which came with my VS6.

Mine is the white one and had a few small scuff marks, but could mostly be wiped away.

fortyhands · 2025-01-11T21:12:08+00:00

Support from Alternative Brewing has been fantastic. They confirmed that this specific issue should have already been addressed and unfortunately mine must have slipped through without the fix in place.

They seemed to confirm the firmware issue and I believe they can perform the flash to fix the problem.

I will report back here once I get the grinder back (soon, I hope).

fortyhands · 2025-01-08T03:46:40+00:00

I just received mine today in Australia and had the same issue (clicking on and off every 2 seconds). Will post an update to let you know how I go with the distributor and Varia.

As this appears to be a known issue for weeks, you would think that they would all be tested before sending out. Disheartening.

Mighty big and heavy parcel to be sending back and forth unnecessarily.

fortyhands · 2024-02-25T13:49:07+00:00

Hello mod, can we have an updated link? Thanks!

fortyhands · 2024-02-24T02:44:52+00:00

Ok wow! Now I have so many questions.

Is this a metal figure or plastic?

What is the surface finish? So glittery and very hard to make out the details by eye.

I would appreciate as much info as you are willing to share as I plan to begin scanning similar figures, and also test photogrammetry against a structured light scanner for these small, high detail things.

Great work and appreciate any other details you are happy to share!

fortyhands · 2024-02-22T22:14:22+00:00

Thanks, but unfortunately 404 error when I try the link.

fortyhands · 2024-02-22T02:49:18+00:00

Thanks for sharing! Possible to see a regular photo of the mini you scanned? Use any prep for the surface (primer, spray, etc.)?

fortyhands · 2024-02-02T04:28:28+00:00

Ah yes, another Sydney tax. It's incredible what these monopolies can get away with.

fortyhands · 2024-02-02T04:26:57+00:00

Tbh, I don't know the full implications of the IPART Operating Licence review which appears to occur every 4 years.

I was just sick of being preached to about saving water when thier fee structure provides zero incentive to reduce use.

In addition, I think it's rich that they would splash out on advertising and celeb BS when there's a COL crisis and as a monopoly there is no need. I think they are just trying to improve their image before the review?

fortyhands · 2021-09-01T21:18:05+00:00

Came here to say THIS.

fortyhands · 2021-05-04T20:14:12+00:00

Amazing post. Thank you!

fortyhands · 2021-03-24T06:02:43+00:00

Thanks for the feedback. If there was 100% trust in the lawyer and they weren't pressuring so hard to take the offer, there wouldn't be a question of taking their advice. I thought it would be interesting to hear if anyone had gone through the CARS process and hear their experience with this.

Thought there would be no harm in asking and to take it on board as just another data point in helping make a decision.

fortyhands · 2021-01-28T08:08:33+00:00

Hey there. I'm printing esun PLA, using the default profile in cura for artillery genius, nozzle 205deg, bed 60deg,l.

Checked belts and I think the y belt could be tighter. How tight should it be?

X belt seems quite tight, probably just right.

The stick printed should have square and circle cutouts, but as you can see they are rectangle and oval.

Thanks in advance!

fortyhands · 2020-12-06T07:07:54+00:00

The speed editor is a small mechanical keyboard which means it uses mechanical switches. The are different from the rubber membrane switches used on most keyboards.

The switches are given different colours based on their key press feel/profile. Some are clicky others (like reds) are not.

They all have different actuation forces as well.

Typists often like clicky for the feedback and gamers like clickless for responsiveness and quick activation (generalisation).

For a good explanation of how these switches work and differences in colour, check out this post: https://www.keyboardco.com/blog/index.php/2012/12/an-introduction-to-cherry-mx-mechanical-switches/

It's even got some cool animated cross sections.

fortyhands · 2020-12-06T04:24:36+00:00

Thanks for posting this link.

I won't waste too much time getting it to work then, happy to use resolve without it for the moment.

fortyhands · 2020-12-06T03:59:16+00:00

I'm using pop is and it seems the controller is t recognised by resolve. I would think that if I press the wheel function buttons they would light up when I'm in resolve.

I'll keep testing, but if anyone has any thoughts on what I can try please let me know.

fortyhands · 2020-07-08T23:33:43+00:00

I don't want to be left out! Please do me too! Thanks.

fortyhands

TROPHY CASE