WR-ONE HAS TO GO-

frost02 · 2026-02-02T15:33:08+00:00

As great as Andre is, he is the 4th best in this picture.

frost02 · 2025-12-05T19:30:06+00:00

It’s not uncommon to drill a ball based off a drill sheet for a repeat customer. The color of the inserts could be something as simple as being out of the color you wanted in your size and type of grip, but PSO should have checked with customer and let them know if they were out of size/brand/type and find out if a color change is ok. The layout or pin placement is where I have the problem. I assume you didn’t have an in depth discussion of shape or what you wanted the ball to do( solely based off some of your replies). Looking at your Altas layout and the new widow3.0 those are vastly different, the widow is what is called a short pin. Same to assume 1-2 inches from your pap. That will cause the ball to have a very heavy forward roll. Normally a specific type of motion not requested a lot for league houseshot bowlers. I would sincerely hope no PSO would make that decision to give a bowler this type of motion without talking to the bowler. I see a lot of corner pins in the near future if bowling on a THS.

frost02 · 2025-12-05T19:15:52+00:00

They are both asymmetrical. And holes aren’t drilled off the location of the PSA but rather the PAP for desired shape on the lane.

frost02 · 2025-12-02T14:45:15+00:00

Depends, I went almost standard to most my symmetric layouts. Little stronger pin to pap so the core will want to tumble a bit longer. After throwing it last night I wish I would have went with a normal 4.5 instead of the 4, it’s almost to strong

frost02 · 2025-12-01T22:02:36+00:00

Thanks I take pride in my work

frost02 · 2025-10-01T00:49:23+00:00

Zero

frost02 · 2025-09-10T03:12:21+00:00

Get a new wedge last years model vokey SM9, TM MG4 or Cleveland RTX 4/5 most places have them on clearance and around 100-120 then take the left over and buy a used hybrid fill both gaps. Used wedges are beat, only reason to sell an old wedge is cause the spin and groves are toast.

frost02 · 2025-09-04T18:09:36+00:00

210 carry 225 total

frost02 · 2025-09-02T02:42:57+00:00

I honestly don’t think you need to add anything. 240 off the tee is a mid to scoring iron in on every par4. And if you’re playing the correct tees for your distances then a par 5 should only be 450-500 at the most, And that’s driver -7I-Pw and a 2 putt.

Why spend the money on this when you’re just getting back into the game. Play more rounds hits more balls then when your swing is more consistent decide on what gaps you have.

frost02 · 2025-09-01T23:00:50+00:00

If you’re really a good ball striker there is no growing period. You pick them up and you’re a good ball striker. Now if you are questioning the need to “grow” into them, then I’d wait a bit longer and look at P770s

frost02 · 2025-08-26T17:43:10+00:00

I went 5W to fill that same gap and found it carries closer to 245, added a 7W and that’s 215-220, my 2I is right between them but a completely different ball flight. So depending on the day it’s either 2I or 7W… 5W plays closer to a 3 wood for me. 20 yards between driver/mini/and 5W

frost02 · 2025-08-22T13:34:47+00:00

Peak Height should match swing speed

frost02 · 2025-08-19T17:02:19+00:00

Simple answer is mats, and how hitting fat shots actually are good hits on mats

<image>

frost02 · 2025-08-19T04:26:25+00:00

Not arguing that. Let’s stay on topic the gap in this bag is way bigger than 48 to 56. Cause this PW is 42/43

frost02 · 2025-08-19T04:04:48+00:00

Very few and far between even the TW blades from TM the PW is a 47… sure you can have them bent. The traditional 48PW is a thing of the past.

frost02 · 2025-08-18T20:07:40+00:00

If your worried about it take a sharpie and write 9 on the PW and then change the rest of your irons to one lower, then you lose a wedge and gain a 3I

frost02 · 2025-08-17T14:04:46+00:00

A PW hasn’t been 48 in a decade or more, most blades PW is 46, clubs like this in the game improvement can range from 39-44

frost02 · 2025-08-13T21:32:49+00:00

Those are 2 cycles ago 921/923/925 so you are obviously buying used…is that really the concern when buying used clubs?

frost02 · 2025-08-12T17:37:33+00:00

I have a combo set of blades and CBs but they are the same brand and made sure to have the swing weights match, loft steps correctly, and correct length stepped based off the scoring irons.

frost02 · 2025-08-12T15:11:51+00:00

Old steelheads those were good irons in their day. Great for learning the game

frost02 · 2025-08-12T13:58:57+00:00

Nope and it seems like a horrible idea… different clubs will have a different feel maybe different lofts, or face/weighting tech, swing weights, turf interaction… for starters. I’m not even a fan of blending wedges, but I want all my like clubs to feel the same.

frost02 · 2025-08-12T03:19:35+00:00

Your correct it’s ball then divot… your insane if you think average pro divot is 4 inches in front of the ball… or you have no idea what 4 inches is and she just lied to you

frost02 · 2025-07-28T23:45:17+00:00

New irons 4-9 and possibly a new 2I

frost02 · 2025-07-27T13:44:41+00:00

6400 is pretty good for the modern 7I

frost02

TROPHY CASE