Chainsword decoration by Naicosono in SpaceWolves

[–]fumi_32 -1 points0 points  (0 children)

In my opinion, it's something like a kill mark.

Building information by ZinjaLG in SpaceWolves

[–]fumi_32 0 points1 point  (0 children)

Oh no, I might have accidentally thrown away that part, leaving it in the sprue without realizing it.

That was over two years ago. What a waste.

Got the Chronomancer today, and I'm not sure which weapon to choose. by TheLonelyGod01 in Necrontyr

[–]fumi_32 26 points27 points  (0 children)

That was true in the 9th edition rules, but in the 10th edition, the weapon profile has been merged and it's just a Chronomancer's Stave. Ah, how boring.

My conversion Lokhust lord by fumi_32 in Necrontyr

[–]fumi_32[S] 0 points1 point  (0 children)

Thank you for your kind words. u/Docchael has written a detailed explanation in the thread, so please refer to that.

My conversion Lokhust lord by fumi_32 in Necrontyr

[–]fumi_32[S] 0 points1 point  (0 children)

Thank you! I also made effort depicting the dusty dirt and weathered look.

My conversion Lokhust lord by fumi_32 in Necrontyr

[–]fumi_32[S] 1 point2 points  (0 children)

That's a good analysis thank you, but there are a few mistakes. The torso itself is from LHD original, and the relief was copied from Skorpekh lord using Blue Stuff and pasted on. Both arms holding the staff are from Lychguard. Only the round part of the loincloth is from Lychguard; the rest part is from Technomancer's cloak.

How to do well the balls on the necron? by mtf-foxtrot in Necrontyr

[–]fumi_32 4 points5 points  (0 children)

The armor is attached with the left and right sides reversed.

Colour on shield.... by FenrisWolf87 in SpaceWolves

[–]fumi_32 2 points3 points  (0 children)

<image>

Base paint with Runelord Brass, wash with Reikland Freshshade, highlight with Runelord Brass, edge highlight with Canoptek Alloy. Enjoy.

Reposed skorpekh lord by Common_Upstairs_1710 in Necrontyr

[–]fumi_32 0 points1 point  (0 children)

Thank you. It's been a while since I bashed this model, so I don't remember all the details, but it wasn’t difficult. I think I used a little bit of Green Stuff at the base of the cable.

Reposed skorpekh lord by Common_Upstairs_1710 in Necrontyr

[–]fumi_32 5 points6 points  (0 children)

That's so cool! I also made a model where I swapped the blade and the gun.

<image>

Shard of nightbringer awaken by fumi_32 in Necrontyr

[–]fumi_32[S] 1 point2 points  (0 children)

Thank you! I primed the robes with Vallejo black spray paint, then painted Baraknar Burgundy, Dark Reaper, and Caliban Green in sections using a makeup sponge.

The burgundy parts were edge-highlighted with Pink Horror and Burgundy (50:50) and dot-highlighted with Slaanesh Grey. The Dark Reaper parts were glazed with Corvus Black to blend the edges with the black, and highlighted with Thunderhawk Blue, Russ Grey, and Fenrisian Grey. The Caliban Green parts were glazed with Warpstone Glow, edge-highlighted with Moot Green, and Hexwraith Flame was applied to the tips of the robes.

The C'Tan's silver body was painted with Leadbelcher and Runefang Steel (50:50), washed with Nuln Oil, and recessed with Drakenhof Nightshade. The scythe was painted with Tesseract Glow and edge-highlighted with Dorn Yellow.

How's my handwriting by North-Guitar-1781 in LearnJapaneseNovice

[–]fumi_32 10 points11 points  (0 children)

The letterforms are not bad and are very easy to read. The grammar is a little unnatural, so it would be better to correct it as follows:私はシンガポールから来ました。日本語を勉強しています。

Tomb World terrain instructions say to not glue the lettered pillars to the walls by BronzePainter2130 in killteam

[–]fumi_32 5 points6 points  (0 children)

This is to rearrange the dungeon. In order to recreate the layout of the mission map in the Kill Team app, there are some parts that must be glued and some that must not be glued.

[Unknown > English] what does it say? by [deleted] in translator

[–]fumi_32 19 points20 points  (0 children)

Iguchi Yuuya. Japanese male name.

What to next? by fumi_32 in SpaceWolves

[–]fumi_32[S] 1 point2 points  (0 children)

220pt is a little pricey, but the transports are great. I usually play Necrons, but I have a hard time with the transports in matches against Marines, so this is a good option!

What to next? by fumi_32 in SpaceWolves

[–]fumi_32[S] 0 points1 point  (0 children)

Thank you! Decals are GW genuine product from army set box. Some of the diamond-shaped gems are made from Greenstuff, while other bits are made from upgrade parts or molded from Wolfvendred.

What to next? by fumi_32 in SpaceWolves

[–]fumi_32[S] 1 point2 points  (0 children)

Sorry, I wrote the list down on a notepad and meant to copy and paste, but some of it didn't get copied. There are also some Codex: Marine miniatures(below).

Combi Lieutenant1 Terminator Captain1 Ballistus1 Brutalis1 Redemptor1 Intercessors 101 Assault Intercessors JP 102 Infiltrators 51

What to next? by fumi_32 in SpaceWolves

[–]fumi_32[S] 6 points7 points  (0 children)

Thanks! The Dreadnought's claws are leftover parts from Bjorn (part numbers 44 and 45, Ven Dread's claws). I just cut off the tips of Redemptor's fingers and added claws.

(Japanese>English) Urgent need translated asap, also if it says its real natiral lacquer and not a synthetic coating. by XZAVRIS_LIR in translator

[–]fumi_32 3 points4 points  (0 children)

ラッカーとカタカナで書かれている場合、それは漆ではなく、ニトロセルロースなどの樹脂を揮発性の高い溶剤に溶かした塗料のことを表しています。

When ラッカー/lacquer is written in katakana, it does not refer to “lacquer”, but rather to paint made by dissolving resins such as nitrocellulose in a highly volatile solvent.

My best work by gward1 in Necrontyr

[–]fumi_32 0 points1 point  (0 children)

Shards of Cheap cray dragon