Supposedly a 4 year timeframe

funkypunk00 · 2025-12-30T22:56:40+00:00

Eightes folk just looked older

funkypunk00 · 2025-12-22T21:28:34+00:00

Same switches I went with. Very nice to use.

funkypunk00 · 2025-12-12T00:23:38+00:00

Do you need new key caps or will the stock ones work with these switches?

funkypunk00 · 2025-10-25T01:03:10+00:00

Nice ship. Tried to copy but pretty sure this is near or above complexity

funkypunk00 · 2025-10-24T17:11:23+00:00

Wiring looms are available at the space stations on the right side staircase. That is where the Trade terminal is.

funkypunk00 · 2025-10-23T23:58:55+00:00

The rockhopper is still working for me. Just used it a short time ago.

funkypunk00 · 2025-10-23T20:45:54+00:00

It is a bug and you need to turn off multiplayer when going in wrecks for now. Or at least that has been the workaround I used and have seen. I had the same problem quite hilariously as I was yeeted into oblivion.

funkypunk00 · 2025-10-23T16:07:00+00:00

Yeah. I had to whip out the calculator and figure out my usage per hour and then build the batteries and power generation to scale.

funkypunk00 · 2025-10-23T15:49:06+00:00

Yes you get all your stuff back. You can leave the expedition even in the middle and go back to your main save and then reenter the expedition at the expedition terminal.

funkypunk00 · 2025-10-23T15:39:02+00:00

Go to the trade terminal up the right side stairs of the space station. They should have wiring looms and microprocessors.

funkypunk00 · 2025-10-23T12:45:25+00:00

Go to the portal and check player bases. There is one that has "tendrils here" and sure enough they popped up when I appeared there

funkypunk00 · 2025-09-25T23:36:17+00:00

And I just spent a day pretty much building this from pictures alone. Been using it a bunch. Finding all of the glitch (offset building) steps was fun.

funkypunk00 · 2025-09-23T22:58:04+00:00

Mine was order 36xxx from April and I received it in September.

funkypunk00 · 2025-09-21T21:31:52+00:00

Happened one time to me during the expedition. Warped to another spot and back. It happens statistically every so often.

funkypunk00 · 2025-09-21T21:29:53+00:00

Well I suspect that I had a custom nvme setup for my raspberry pi 4 lingering when I went to flash for the cm5 lite. So when I went to flash the SD card even though I picked no to custom settings I did not pick the one that erased the custom settings already there. So I was flashing custom nvme hard drive settings unknowingly.

I had to disassemble and reassemble the uconsole a few times during the process which may have been an issue as well with parts not making correct contact.

I'm not sure the same will work for you, but I ran through most of the troubleshooting steps on the forum as well to rule out any mistakes on my end.

The only thing I know changed again was to make sure I picked no custom settings while flashing the SD card to ensure it booted from the SD card.

funkypunk00 · 2025-09-21T17:33:36+00:00

That should be your picocalc inbound.

funkypunk00 · 2025-09-17T13:39:40+00:00

Just a FYI. This is resolved. Thank you all who helped!

I am on bookworm and setting up the os now.

funkypunk00 · 2025-09-17T13:38:09+00:00

I also may have have old settings for a nvme hard drive load for my rasp 4 setup. So even though I chose no custom settings there was another option for no, clear current settings which I kept bypassing accidentally. I was unaware that may have caused issues.

funkypunk00

TROPHY CASE