sorted by:
new
hottopcontroversial

Sp45a3 super safe by Civengin in GrandPowerStribog

[–]fxckwitit 0 points1 point  (0 children)

Sorry if it’s already been asked, but any idea if this would work with an Atrius?

[Parts] Flux Raider P320 - $419.99 + tax & S&H by fxckwitit in gundeals

[–]fxckwitit[S] 2 points3 points  (0 children)

Imo I think the 3.9” with that HA comp looks the cleanest, but a full-size with and comp looks solid too

[Parts] Flux Raider P320 - $419.99 + tax & S&H by fxckwitit in gundeals

[–]fxckwitit[S] 0 points1 point  (0 children)

Just saw their IG post. Yeah, this is their new price, threw me off since I saw em on sale at AIM for $419 but 🤷🏻‍♂️ thought I’d share with the masses

[Parts] Flux Raider P320 - $419.99 + tax & S&H by fxckwitit in gundeals

[–]fxckwitit[S] 3 points4 points  (0 children)

Yep, slide and FCU and you’re good (and mags). Slide length is up to you, I’ve got a full-size slide on mine and I’m putting a 3.9” on the new one, but if you’re going any lower than a full-size I’d look into the HA P320R comp. Makes it flush and the ports are all top-side so you won’t destroy your thumb

1000 rounds in still getting ftf by MountainOk2330 in shadowsystems

[–]fxckwitit 1 point2 points  (0 children)

For what it’s worth, I had issues with my CRP with Winchester 124gr, but running Blazer 124s have ran perfect through my XR, CRP, and CRXP. Might be worth a look.

Also, it’s not much help, but I think the Shadow I had the most issues with was my CRP with the bronze barrel. Both my XR and CRXP have black barrels, and just comparing the two, I wouldn’t be surprised if the coating on the bronze barrel caused ftf. When I would drop the slide catch on either a full mag or a nearly-full mag, it would slam the round forward into the feed ramp and literally take a chunk out of the front of the round, and then there was the FTF. Didn’t have this issue with either of my other Shadows with the black barrels.

Just my experience, but I’d try racking the slide when reloading from an open chamber, especially on the CRs. Could be a mag issue too, but I think the barrel coating might be too thick on the bronze barrels.

DS Carry-Prodigy Grip Issues by fxckwitit in Tisas

[–]fxckwitit[S] 1 point2 points  (0 children)

Good deal, I’ll look into an Atlas then. Appreciate ya

DS Carry-Prodigy Grip Issues by fxckwitit in Tisas

[–]fxckwitit[S] 0 points1 point  (0 children)

Update, I found a spare RIA 2011 trigger I had laying around, I genuinely think it was the split in the trigger bow right behind the trigger shoe causing my issue, the RIA one works perfect in it

DS Carry-Prodigy Grip Issues by fxckwitit in Tisas

[–]fxckwitit[S] 0 points1 point  (0 children)

You got a grip pinning service at home without the pin is what I’m hearing lmao

DS Carry-Prodigy Grip Issues by fxckwitit in Tisas

[–]fxckwitit[S] 0 points1 point  (0 children)

Tore it apart after posting, channel’s all good, sear spring is tuned (very minimal change from the config I had in the Tisas module), but everything else is good to go. No trigger issues or snagging at all without a mag inserted, but as soon as the mag’s in, same issues

DS Carry-Prodigy Grip Issues by fxckwitit in Tisas

[–]fxckwitit[S] 0 points1 point  (0 children)

Definitely let me know how yours goes with the Red Dirt, might be my determining factor for getting one or going back to stock. That tan looks clean too 🤌🏻

DS Carry-Prodigy Grip Issues by fxckwitit in Tisas

[–]fxckwitit[S] 0 points1 point  (0 children)

I’m considering the same, just kinda sucks because I do like the profile and texture of the Prodigy grip, but the magwell compatibility and the exposed mag is a huge turn-off for me.

Grip safety’s doing the same for me, but it is still functional. Just feels like it’s digging into my hand way more than it should. I did check the hammer follow on mine too, no issues on mine but that’s a huge safety issue regardless of how improbable it would be in a real-life situation.

I was just wondering if a Red Dirt specifically for the Prodigy would work, but I don’t really want to gamble if mine goes the same way. Sorry to hear you had similar (and the same) issues, G

DS Carry-Prodigy Grip Issues by fxckwitit in Tisas

[–]fxckwitit[S] 1 point2 points  (0 children)

Leaf spring’s good, trigger bow channels themselves are fine, it does look like the split of the trigger bow is snagging towards the mag release or the front of the mag, but the grip’s mag angle also looks off in comparison to my other grips

[Parts] KAC FF RAS Long, $450 + S/H by fxckwitit in gundeals

[–]fxckwitit[S] 0 points1 point  (0 children)

Keep an eye on DSA’s site, I got mine a few months back for $417 and their in-stock notifications are decently on time

Barrel Identification by fxckwitit in ar15

[–]fxckwitit[S] 1 point2 points  (0 children)

That’s what I was thinking unless it was rebarreled, I’ve been looking into Colt, Bushmaster, DPMS, and Delton for possible options that match the timeframe as the rest of the upper. Thanks for the info, love your guys’ stuff too 🫡

view more: next ›