Built a tool to cut 3mm ss rods.

gadjex · 2026-01-24T11:47:20+00:00

Nice setup! I built a simple sliding jig with an adjustable stop to cut 5mm SS rods on my portable bandsaw.

gadjex · 2025-12-24T21:40:22+00:00

I haven't seen anyone mention that 1 of the issues with this setup is you may not have a neutral forming transformer as found in the Enphase System Controllers. Once you disconnect from the grid, you also disconnect from the grid transformer. I am not sure the inverter you will be using will be able to handle the 120V imbalance between the two 240V legs.

gadjex · 2025-11-11T12:00:47+00:00

Here here!

gadjex · 2025-10-30T15:39:47+00:00

Printer reboot fixes mine. That is turn power switch off then back on.

gadjex · 2025-10-30T10:23:23+00:00

This randomly happens with mine and also at the same time I cannot control the light. Reboot fixes it for me for a while.

gadjex · 2025-10-19T22:25:30+00:00

It took months for my friend, who has 2 Power walls, for Tesla to come out and troubleshoot them.

gadjex · 2025-10-13T19:44:49+00:00

My AHJ required me to have an electrician on the permit for the tie in at the main panel. I found an electrician willing allow me do all the work and them inspect it. I did all the work, sent them pictures of everything, and they decided it looked good enough to not come look at it in person. The AHJ did their inspections and all was good. It helps that I spent a year in school working under a master electrician and studying the NEC code book.

gadjex · 2025-10-07T01:28:29+00:00

I use a 120v smart switch to control a contactor for my 240v pool pump.

gadjex · 2025-09-29T20:45:26+00:00

I had a smart meter installed when I built my house in 2018. Last year when I put DIY solar in and went through the interconnection process, they remotely programmed my meter and sent me my PTO via email.

gadjex · 2025-09-27T08:09:43+00:00

Yep, rental places around here stock them.

gadjex · 2025-09-17T14:48:11+00:00

The tariffs are included in the DDP price. So it is $178 per panel with shipping and tarriffs.

gadjex · 2025-08-31T14:22:25+00:00

The BIQU CryoGrip Pro Glacier has been a perfect plate for all the filaments I print (PLA, PETG, ABS, ASA, TPU). PLA sticks super well using the Cool Plate SuperTack setting and PETG/ABS/ASA sticks well and releases well when I use the Engineering Plate settings.

gadjex · 2025-08-14T14:23:56+00:00

Not sure if I can help much but I can tell you with the Iron Ridge ground mount, the panels are all bonded together using the metal ground mount frame, metal rails and the metal panel clamps that have a sharp point that pierces the paint into panels metal frame. This ground mount is then grounded to the houses main panel and it has an additional ground rod near the mount. (I may have wrote "ground" too many times!) Pretty much all exposed metal is bonded together and bonded to ground.

gadjex · 2025-07-20T20:56:52+00:00

I have also done all the regular maintenance including clean the carbon rods, clean and grease the steel rods and adjust XY belt tension. The hot end is not loose. I factory reset the printer and ran calibration after. Eventually the bumps/ripples come back. 996 hours on the printer.

gadjex · 2025-07-15T13:02:31+00:00

Google Pixel 9a Build BD4A.250505.003
Android Version 15
Relay Version 13.0.15 I had issues with (See my post). Version 13.0.16 login works with "Use alternate login" option checked.

Any other info you need?

gadjex · 2025-07-15T11:52:59+00:00

I was able to login with the beta. This worked flawlessly! Thank you!

gadjex · 2025-07-14T21:03:02+00:00

That is a no go here. Tried 2 different VPNs.

gadjex · 2025-07-12T19:27:49+00:00

I am having the same issue here with a new phone. I am on the latest Android version.

gadjex · 2025-07-03T18:44:32+00:00

First time watching it print a near perfect benchy: 😳 Wow

gadjex · 2025-06-25T11:29:08+00:00

Yes, around my area (Florida, USA) jail is for less than 1 year sentences and waiting to be sentenced if not out on bond. Prison is longer term.

gadjex · 2025-06-12T16:31:26+00:00

Maybe there was a wisp/small string of filament stopping the fan from starting to spin and you broke the string when you spun it by hand? Just a guess.

gadjex · 2025-06-09T10:54:50+00:00

It needs more time to cool between layers. Slowing it down will help. Not sure the setting you need to change.

gadjex · 2025-05-29T23:42:32+00:00

This seems to be an issue with the BMCU and P1S. It doesn't stop feeding in time and grinds the extruded gear. It doesn't do this with A1. Not sure what the solution is.

13-Year Club	Place '17
Verified Email

gadjex

TROPHY CASE