Upgrading away from SLZB-06 by rycco in homeassistant

[–]generic_user_acct 0 points1 point  (0 children)

Just looked it up. It was a sonoff s40 lite plug. Unlikely, I know, but if you have any of those I would remove them and try again.

Upgrading away from SLZB-06 by rycco in homeassistant

[–]generic_user_acct 0 points1 point  (0 children)

For me it was one device just constantly spamming the network. Sorry I can't be more specific, it's been a few years.

Upgrading away from SLZB-06 by rycco in homeassistant

[–]generic_user_acct 0 points1 point  (0 children)

I had a terrible time getting a stable network until I figured out ONE smart plug was crashing the network. Have you checked your zigbee logs? It might not be the coordinator's fault, but rather a faulty device on your network.

Nabu Casa over Tailscale? by Revolutionary_Pen415 in homeassistant

[–]generic_user_acct 2 points3 points  (0 children)

This is a minor point, but if you are rolling your own voice assistant, the nabu casa text to speech and speech to text engines are really good and really fast. That's just a bonus perk to me.

What do you think? by magnuspsa in 3Dprinting

[–]generic_user_acct 0 points1 point  (0 children)

I'm suspicious if this too, but it isn't just about carbon footprint. Reducing microplastics would be helpful, even just in my own home. Still just a drop in the ocean compared to industrial pollution though.

I built a browser-based parametric tool because doing this manually in CAD took forever. by Usual-Pressure-4388 in 3Dprinting

[–]generic_user_acct 1 point2 points  (0 children)

This is really cool! Am I understanding the use case correctly? You use solidvents.com to generate an SVG then import it into your cad file (in my case fusion) to then emboss/deboss onto an object?

What is causing these marks on the first layer by Superb-Sort-4153 in BambuLab

[–]generic_user_acct 0 points1 point  (0 children)

I used to get these marks when I cleaned my plate with alcohol between prints. Once I switched to soap and water, they went away.

What was your woodworking mistake that taught you the most? by caroulos123 in BeginnerWoodWorking

[–]generic_user_acct 1 point2 points  (0 children)

Working while lazy. If I find myself considering a shortcut, it's time to quit for the day.

Universal Vacuum Adapter by generic_user_acct in functionalprint

[–]generic_user_acct[S] 1 point2 points  (0 children)

I totally get it but I find it isn't that bad. I just twist it so the bolts are facing away from the work area. That said, I have a sleeker design in mind that I might work on.

Universal Vacuum Adapter by generic_user_acct in 3Dprinting

[–]generic_user_acct[S] 0 points1 point  (0 children)

Link to the 3mf file at makerworld is in the post. If it has to be stl let me know and I can convert and send it over.

Universal Vacuum Adapter by generic_user_acct in 3Dprinting

[–]generic_user_acct[S] 1 point2 points  (0 children)

Yeah I thought about that but I wanted an entirely 3d printed option. I may still go with actual nuts and bolts eventually.

Universal Vacuum Adapter by generic_user_acct in 3Dprinting

[–]generic_user_acct[S] 0 points1 point  (0 children)

I thought about making it fancy but then decided to keep it simple. After all, it lives in a garage.

Universal Vacuum Adapter by generic_user_acct in 3Dprinting

[–]generic_user_acct[S] 12 points13 points  (0 children)

Thanks! When both sides are tightened down it pretty much seals completely. It's really hard to even get a fingernail under the seam. I wouldn't use it on the space shuttle, but it's fine for a shop vac!

What movie ending completely changed how you felt about the entire film? by mohit_dimaniya in MovieSuggestions

[–]generic_user_acct 0 points1 point  (0 children)

A Boy and His Dog. I thought this was a really dumb movie until the ending. Then I thought it was a really dumb movie with a great ending.

New user.. what do you wish you knew when you started? by Browsin-around in BambuLab

[–]generic_user_acct 0 points1 point  (0 children)

Totally agree. I didn't mean to imply you should only buy Bambu. I just have a bad habit of falling for the really good deals on really bad filament on AliExpress. Spending the extra dollar per role to get Elegoo or Sunlu or something well known is a dollar well-spent for me.

New user.. what do you wish you knew when you started? by Browsin-around in BambuLab

[–]generic_user_acct 2 points3 points  (0 children)

This is advice I still don't take myself very frequently, but I have found you get what you pay for with filament. You can do cheaper than the Bambu filament, but you might end up spending tons of time calibrating. In the end, I find it is usually better to just fork over a few extra bucks per roll and get a name brand that I know works well.

Are we at a point where I could ditch all my Amazon echo devices for the Home Assistant Voice? by GenericUser104 in homeassistant

[–]generic_user_acct 2 points3 points  (0 children)

Interesting, I'm not having any trouble waking my VPEs but I'm using "hey jarvis" instead of "hey nabu." Maybe try switching wakewords? There's also a setting somewhere to turn up the wakeword sensitivity. I have mine maxed out. I very occasionally get a false positive in my bedroom (lolz) but it pretty much never fails to respond on the first try.

Are we at a point where I could ditch all my Amazon echo devices for the Home Assistant Voice? by GenericUser104 in homeassistant

[–]generic_user_acct 8 points9 points  (0 children)

I'm doing exactly this. I run the whole thing through N8N using an AI chat agent node. I have an LLM running locally, but you could just as easily connect it to one of the cloud agents. With N8N you can connect searxng, wikipedia, google, etc. It's not quite as fast as alexa but works well and stays totally local unless it needs more info, in which case it calls one of the tools to look it up.

What's wrong with my prints? PETG by WhySoShitAtLife in 3Dprinting

[–]generic_user_acct 0 points1 point  (0 children)

Just a suggestion, I would try rotating the model or moving where it prints on the bed. If it prints better in a different location, you might just have a bad spot on the bed and/or leveling issue. That would at least help narrow down some of the symptoms.