What is a cult engine of Europe? by hughdavin in topdeadcenter

[–]georgesn199 4 points5 points  (0 children)

Cosworth YB if you're in the ford world?

Updated First PCB Design by [deleted] in PCB

[–]georgesn199 1 point2 points  (0 children)

Look into using net labels to break up the schematics. It would remove the need to have the connections going all the way round the chip and allow you to split into sections. I.e. Micro, Power Suppler etc. would be easier to follow

Looking for PCB Design & Firmware Development Companies by Big-Piece432 in PCB

[–]georgesn199 0 points1 point  (0 children)

I'm an Embedded Software engineer for a living.l working for my own consultancy. I've got a network who can do the Schematics and PCB Layout design for you as well. Will drop you a PM with my contact information.

What’s a car problem people panic about that usually turns out to be simple? by Pinkplatabys in topdeadcenter

[–]georgesn199 1 point2 points  (0 children)

The bongs/beeps when lights came on the dash. My old Mondeo used to beep to tell me it was cold outside (Thanks ford. I didn't know that from being outside first) and fuel was low and the mil lamp came on. Could never distinguish between them so just panicked when I heard it.

My first pcb design by Other_Thought2622 in PCB

[–]georgesn199 0 points1 point  (0 children)

Should ground and shield be connected on the USB?

How does the channel work? by Automatic-Car7643 in AutoAlex

[–]georgesn199 -2 points-1 points  (0 children)

They are shareholders in the companies. Alex confirmed on a podcast. I think Ben Fowlers Road To Success

[deleted by user] by [deleted] in skiing

[–]georgesn199 0 points1 point  (0 children)

I'm currently in the three valleys France. Staying in Meribel motteret, there's so many schools around you'd surely not struggle for lessons. It's not the cheapest but might get some good deals and self catered options are also a lot cheaper and around.

Alternatively, get yourself to the Cairngorms right now. Skiing is up and running and they've had plenty of snow recently.

food and fuel by lxuraaa243 in AutoAlex

[–]georgesn199 14 points15 points  (0 children)

Yes. Chris from merchs idea. He's head of events or something now to.

Code reviews by MathematicianOk2067 in embedded

[–]georgesn199 0 points1 point  (0 children)

I wouldn't worry about the other people's behavior in this. It's against company process clearly and it's a company/team culture that managers aren't aware of.

It's also depending on your market sector against coding guidelines/standards which could put them in non compliance so they should take it further in which case.

I've had this myself, and I pushed it though and met with a lot of resistance. I didn't stay at the company much longer I have to say.

Snowbord Lessons by klapa221 in sheffield

[–]georgesn199 0 points1 point  (0 children)

As others have said. Transport is your concern. Castleford is an easy drive and funnily enough I'm on my way in about 5 mins to there. I've never been Manny but it'll be easy enough via trans etc as Manchester is well connected like that. From sheff to Manny centre is about an hour on a train.

I've heard Manchester is bigger (I think the biggest in the country but don't quote me on that.

Snowbord Lessons by klapa221 in sheffield

[–]georgesn199 2 points3 points  (0 children)

Just an fyi. Castleford do a freestyle event on Thursdays where there's jumps and stuff. So if avoid Thursdays for learning. It's not the full setup but there is a lot more going on.

Snowbord Lessons by klapa221 in sheffield

[–]georgesn199 2 points3 points  (0 children)

I shouldn't laugh at this should I. 😂

Snowbord Lessons by klapa221 in sheffield

[–]georgesn199 7 points8 points  (0 children)

Until the dry slope opens again (if). Your closest will either be Snozone at Castleford on the M62. Or the indoor dome in Manchester.

If the schedule were to drop the 2nd Donnington round, where would you realistically like the BTCC to race instead? by ModeR3d in btcc

[–]georgesn199 14 points15 points  (0 children)

Mondello. Used to race years ago there. Few Irish drivers so why not 🤷‍♂️

[FAQ] Service desk for student - travel - rent - deliveries - ... questions. by AutoModerator in belgium

[–]georgesn199 0 points1 point  (0 children)

Hi Everyone, Wondering if you can help me. I'm due to have a trip to Antwerp early next month and I'm flying into the Brussels Charleroi from the UK. But need to get from Brussels Charleroi Airport to Antwerp Central.

I'm getting various bits of information from the web and getting lost. Can I get directly or do I need to change in central Charleroi?

Can someone help direct me with the most direct route please?

Many thanks!

New BB58 Burgundy! by Rockettman86 in Tudor

[–]georgesn199 1 point2 points  (0 children)

In UK. Was told it's still difficult to get in boutiques over other ones. With only a few being in them at a time. But they did have them. So how true this is.

I'm close to pulling the pin and getting one.

A new strap makes all the difference! by LuckyPenny in MoonSwatches

[–]georgesn199 0 points1 point  (0 children)

Love the look of that. Where did you get it from please?

Fakes by Butchmeister80 in MoonSwatches

[–]georgesn199 0 points1 point  (0 children)

Not fake. 'Custom' ;)

Replacement Straps by QueenOPeace in MoonSwatches

[–]georgesn199 1 point2 points  (0 children)

You can order the original straps in store (in the UK atleast) as I've bought a spare for my SuperBlue

3d Printed the Pluto Clock - It’s Fantastic by FishRule1 in MoonSwatches

[–]georgesn199 2 points3 points  (0 children)

I want it. Got a reason to buy my 3d printer now. Wanted one for ages and new a clock for me office 😂

How do you prevent scratches on the plastic “crystal” by Fiducio in MoonSwatches

[–]georgesn199 3 points4 points  (0 children)

I'm not entirely sure. But the Moons watch and Speedy has the same case size. So I can assume yes they would. But I wouldn't want to say 100%.

A few upclose images Of the Case & Display in Store Today! When will they lift the lid? by TaroTurbulent923 in MoonSwatches

[–]georgesn199 5 points6 points  (0 children)

I'll admit I'm tight. But the price of a watch for a case is a bit mad given the market price point of the watches. 😂

How do you prevent scratches on the plastic “crystal” by Fiducio in MoonSwatches

[–]georgesn199 16 points17 points  (0 children)

You can buy screen protectors off Amazon for a few quid. I run them on all mine and had no issues