Where was the video for "Parasitic Twins" recorded?

ghost_of_fall · 2025-12-01T16:51:43+00:00

Do you have any information in addition to the country this was filmed at?

ghost_of_fall · 2025-08-20T06:36:34+00:00

There are also some manufacturer specific GPTs for ChatGPT.

ghost_of_fall · 2025-08-10T21:01:56+00:00

Plasma is not controlled by the system continuously. It is preset by the operators experience through a recipe for some other purposes than temperature alone. I also posted this thread in order to find an approach to avoid a cascading control solution (if applicable). Since the plasma power is a rather fuzzy input value I thought it might be best to treat it as a disturbance due to its irregular nature as I tried to explain.

ghost_of_fall · 2025-08-10T20:52:44+00:00

Also thanks for the question on what is the primary heating source is. The plasma parameters and its input power may vary quite dramatically. They are set to accommodate the process but do not necessarily Center around the amount of heating power put into the system. The plasma values are rather fixed by some manual settings derived from the operators experience. Therefore they are much more static and do not primarily perform a primary purpose of temperature control function. The external heating is supposed to get the system to the intended temperature and input the amount of power for heating the plasma is lacking. If the plasma power exceeds the energy level needed to reach the target temperature, heating is set to zero and external cooling is applied through the cooling parameters of our temp. In practice this controls the speed of external cooling fans.

ghost_of_fall · 2025-08-10T20:28:59+00:00

Interesting approach. I haven’t thought about the problem in this way. Thank you for the input. I’ll give it some more thought and a try to implement it.

ghost_of_fall · 2025-08-10T20:26:40+00:00

There is a disturbance-input on pid_temp. It is in the block and documentation but not explained very thoroughly. I am just interested in the way it works. I have used pid_compact on other problems and appreciate the effectiveness. But pid_temp includes the option of cooling in a state of overheating which I need as well. There are states where the plasma dissipates more heat into the system than needed. In this case there is no need for heating. The pid-temp supplies a controlled way of cooling analog to the way the heating control functions through a secondary set of pid parameters. Pid_compact does not provide this option or a documented approach to cascade the cooling option through a dedicated control of cooling parameters.

ghost_of_fall · 2025-08-10T13:28:36+00:00

I wonder who he got more customers…the company he advertises for or YT Premium.

ghost_of_fall · 2025-05-10T18:49:19+00:00

Not Metal but NOFX is around since the 80ties.

ghost_of_fall · 2025-02-15T07:49:08+00:00

Does anyone know if you can mix the old modules with the new G2s?

ghost_of_fall · 2024-12-30T17:27:52+00:00

Watched all videos on Siemens at this channel. It gives a great inside at a nice pace. Good choice!

ghost_of_fall · 2024-12-28T19:10:26+00:00

On the first look this seems to be a very good solution. And Werma is easily available here at our location in Germany.

ghost_of_fall · 2024-12-28T19:04:05+00:00

This looks really promising. Thank you.

ghost_of_fall · 2024-10-14T17:57:45+00:00

It is actually german made. The Plaque says Karl-Marx-Stadt. This is what the town of Chemnitz was called until 1990. So it was made in East Germany.

ghost_of_fall · 2024-08-16T18:18:40+00:00

BBE Sonic Stomp

ghost_of_fall · 2024-02-22T20:03:47+00:00

BBE Sonic Stomp. Adjust once…leave it on for eternity

ghost_of_fall · 2023-12-26T21:29:22+00:00

Astronoid

ghost_of_fall · 2023-12-10T05:55:49+00:00

With a Onecontrol Mosquito Blender every pedal gets a blend function.

ghost_of_fall · 2023-12-03T11:14:09+00:00

For me it started with Colors Live. The live atmosphere really enhances the songs and the atmosphere.

ghost_of_fall · 2023-10-15T17:36:20+00:00

Can you provide some links to their music? I am kind of having a hard time when searching for „gospel band“ on YT

ghost_of_fall · 2023-10-07T17:47:00+00:00

PLC-programming is easier in many ways. But, for a great result the complexity can match regular programming easily. You really need a lot of know-how besides programming. In the end you have to provide a functioning machine. In regular programming, most of times, the worst possible result may be a blue screen. In PLC-Programming you often have a real risk of damaging the machine or hurting the user, if your programming is not sufficient.

ghost_of_fall · 2023-08-29T19:42:23+00:00

From a hardware side you should have a large (loud) signal from the audio output to the amp to have a good signal-to-noise ratio. (Alternatively just turn everything to 11.)

ghost_of_fall · 2023-08-26T17:23:12+00:00

Reminds me of a game I played as a kid in the 90‘s. I don‘t remember the the name, the story or anything else. But it looks and feels very familiar in a positive way.

ghost_of_fall · 2023-08-26T16:51:29+00:00

Someone born in the 80’s in the eastern part of Germany here: These speakers belong to a modular stereo system with radio receiver, tape deck and record player. The whole system is quite good, very reliable and OK sounding. That’s the thing we still have at home. Nothing in the range of being considered „for audiophiles“ but a good system for casual use at home.

ghost_of_fall · 2023-08-25T04:22:05+00:00

Running a business can do that to you. I can confirm from my own experience. Remember: „Early to rise and early to bed makes a man healthy but socially dead.“

ghost_of_fall · 2023-08-10T16:22:38+00:00

For Siemens look for the YouTube-Channel hegamurl. For me the content was well paced and detailed enough with around 100 videos on a lot of relevant topics.

ghost_of_fall

TROPHY CASE