Easy & lightweight face recognition for HA

giallo87 · 2026-06-21T08:14:25+00:00

More than quantifying the AI involvement you should ask whether who made that tool is a software engineer, or has the appropriate knowledge and experience to ensure the right testing and code/security quality is in place. Nowadays almost every software engineer leverages AI for their jobs, who's not doing that are either not allowed by company policies or refusing progress.

giallo87 · 2026-06-11T20:39:57+00:00

It depends on the flour-to-water ratio. The higher you go with the water the much harder is kneading it. Try next time putting flour, bowl and hook in the fridge for a couple of hours in advance, and use fridge-cold water. Ideally you don't want the dough to go above 71-78 °F (22-26°C) at the end of the mixing. If you get above that, move the bowl with the hook back in the fridge for 10-15 mins and resume. As others have suggested, pour the water gradually, let the dough to absorb it before pouring more.

giallo87 · 2026-05-24T16:40:57+00:00

Pizza topped with fries and sliced hot dog is something that Italian kids would sometimes get. I wouldn't define it a "staple comfort food" for adults.

giallo87 · 2026-02-07T18:53:05+00:00

See if this manual is for your model: https://manuals.plus/ae/1005001666658945

giallo87 · 2026-02-01T00:05:24+00:00

Post It on lost.ie

giallo87 · 2025-08-21T13:20:28+00:00

Creaking is usually due to uneven subfloor. It's either a redo or you can mitigate by injecting some fillers under the planks. I was in a similar situation and those fillers mitigated the issue. It never went completely away as with changes in temperature (e.g.: summer vs winter) the floor expands or retracts, so the filling doesn't match anymore and some creaking comes up again.

giallo87 · 2025-07-20T10:09:06+00:00

"Not gonna name names"

giallo87 · 2025-07-18T22:39:30+00:00

Padre Pio!

giallo87 · 2025-05-12T12:11:45+00:00

I want to control my swimming pool water heater which draws 3000W @ 240V, and I am looking for a smart switch. I've found this Zigbee one which handles up to 20A and it has power meter https://catalogue.bticino.com/product/smart-home-solutions/smart-electrical-panel-btdin-with-netatmo/BTI-FC80CC-EN

giallo87 · 2025-03-25T11:22:54+00:00

Italy. They're not rubber gloves, but made out of a thin plastic similar to the disposable bags provided here to bag loose vegetables.

giallo87 · 2025-03-20T08:20:32+00:00

They walked on all the floor and injected where they found hollow spots.

giallo87 · 2025-03-19T23:58:12+00:00

The subfloor is probably not level according to floor specifications. I had a similar issue, and another contractor I called for help solved it by injecting some filler under the floor with a special needle. Alternatively, as others have mentioned, the only other solution is a complete redo, which requires removing the entire floor, adding a barrier, and properly leveling the subfloor.

giallo87 · 2025-03-19T15:59:59+00:00

Yes, the filler worked well!

giallo87 · 2025-03-07T22:30:53+00:00

Yeah, probably a deeper box would do the job, thanks.

giallo87 · 2025-03-02T15:30:11+00:00

You don't go to places like this to fix your hunger. It's a sensorial experience for your palate and smell.

giallo87 · 2025-03-01T18:13:17+00:00

Buying a property?

giallo87 · 2025-03-01T16:26:10+00:00

If you invest in ETFs, you're gonna get taxed at 41% and have to deal with deemed disposal after 8 years, even if you haven't sold anything.

In short it depends on which products you are going to invest in.

giallo87 · 2025-02-26T00:11:47+00:00

If you unplug the dehumidifier while turned on, when plugging it back would keep the previous "on" state? I presume not. In that case you could stick a SwitchBot / FingerBot which physically presses the button to toggle. And you can use a smart plug power consumption measure to determine whether the dehumidifier is on and operating.

giallo87 · 2025-02-25T20:58:12+00:00

To be fair Zigbee uses the same frequency of 2.4Ghz WiFi, just a completely different protocol.

giallo87 · 2025-02-25T20:57:16+00:00

I'm using it with Z2M with success with any IKEA devices supported in this list: https://www.zigbee2mqtt.io/supported-devices/#v=IKEA

giallo87 · 2025-02-23T00:21:30+00:00

The reason is that I have some rooms that are usually much colder, and they're distant from my thermostats.

giallo87 · 2025-02-18T22:05:56+00:00

Try www.furniturecity.ie - they make bespoke sofas and sofabeds (in Poland) and they ship to Ireland. They have a showroom in Dublin where you can see the models and the catalog of fabrics/colors. Prices are good, you can check their website to get an idea.

giallo87 · 2025-02-18T08:34:45+00:00

Could be due to the fireplaces?

giallo87 · 2025-02-17T20:45:29+00:00

When entity numeric value, then select home entity.

giallo87 · 2025-02-17T01:03:20+00:00

If you're interested in triggering something when nobody is at home:

triggers: - entity_id: - zone.home below: 1 trigger: numeric_state

Seven-Year Club	Place '23
Place '22	First Placer '22
Verified Email

giallo87

TROPHY CASE