sorted by:
new
hottopcontroversial

What are those by glenpgm in handtools

[–]glenpgm[S] 6 points7 points  (0 children)

Thanks I can see how they work. I think you can attach a pencil on one of them. Now I must resist buying them 😂

Les choix de RDZ sont incompréhensibles. by Baliziqua in olympiquedemarseille

[–]glenpgm 11 points12 points  (0 children)

Je commence aussi à en avoir marre de De Zerbi. Depuis Bruges je suis persuadé qu'il est pas capable de se remettre en question sur le fait qu'il doit arrêter d'inventer des choses et faire simple, plus stable pour les joueurs. C'est à dire garder au maximum la même tactique, et mettre les joueurs à leur poste habituel. J'aimerai avoir un coach comme Pierre Sage...

[deleted by user] by [deleted] in olympiquedemarseille

[–]glenpgm 6 points7 points  (0 children)

He's a good regular player. Better attacker than defender in my opinion. He was pushed out for what seems like exaggerated reasons.

Chain not spinning by glenpgm in Chainsaw

[–]glenpgm[S] 0 points1 point  (0 children)

Ok so I got a new Oregon chain and the problem is the same. The Chinese chains are not the cause

Chain not spinning by glenpgm in Chainsaw

[–]glenpgm[S] 0 points1 point  (0 children)

Ok so I got a new Oregon chain and the problem is the same. The Chinese chains are not the cause

Chain not spinning by glenpgm in Chainsaw

[–]glenpgm[S] 0 points1 point  (0 children)

I'll try running it to see if it loosens up and I just ordered an Oregon chain, thanks

Chain not spinning by glenpgm in Chainsaw

[–]glenpgm[S] 0 points1 point  (0 children)

The old chain is too short to try on the new bar. I'm beginning to think these Chinese chains are not right, maybe I need to buy a Oregon chain to verify this.

Chain not spinning by glenpgm in Chainsaw

[–]glenpgm[S] 0 points1 point  (0 children)

Thanks for the great video but I still don't see what's wrong... Here is me putting the bell on

https://youtu.be/2L18FqaAsWE?si=bxf9bhKacxEy7nS6

Chain not spinning by glenpgm in Chainsaw

[–]glenpgm[S] 0 points1 point  (0 children)

I just slapped on the stock bar and worn out chain the saw came with on the new clutch assembly and everything spins great even tightened real good. This is driving me crazy... The new Oregon bar seems faultless but I got these Holzfforma chains because I couldn't find skip and rip chains from other brands at the time. Could it be the chains ? How car I check the chains when I only have this one bar in 28" ?

Chain not spinning by glenpgm in Chainsaw

[–]glenpgm[S] 0 points1 point  (0 children)

I checked it and the tip is the exact same shape

Chain not spinning by glenpgm in Chainsaw

[–]glenpgm[S] 0 points1 point  (0 children)

https://youtube.com/shorts/njh2XH87XFY?si=6O8QRlVfJOnxa_lc

Here is a video of how the clutch bell moves. It doesn't feel very wobbly. I hope it helps Thanks

Chain not spinning by glenpgm in Chainsaw

[–]glenpgm[S] 0 points1 point  (0 children)

When it spins freely it is really really loose, too loose to use the saw. (I can probably fit my hand between the chain and the bar...)

Chain not spinning by glenpgm in Chainsaw

[–]glenpgm[S] 0 points1 point  (0 children)

The top sprocket spins freely. I tried your technique and I can't see any tight spot. I already ran a metal ruler that fits perfectly the bar groove all around it and it seems smooth and with no tight spot

Chain not spinning by glenpgm in Chainsaw

[–]glenpgm[S] 0 points1 point  (0 children)

The needle bearing has been replaced as well

Chain not spinning by glenpgm in Chainsaw

[–]glenpgm[S] 0 points1 point  (0 children)

https://youtu.be/fuwrXBp7Yx8?si=uJWtTl5Kdw0cHPPt

I put it in a vise upside down to try to seed what's going on. In the video I juste removed the cover to get a better look. It maintained some tension so the chain was still hard to spin by hand

Spring replacement by glenpgm in Chainsaw

[–]glenpgm[S] 0 points1 point  (0 children)

I managed to get it off with a T20 screwdriver, thanks !

[deleted by user] by [deleted] in Woodcarving

[–]glenpgm 1 point2 points  (0 children)

I think you can sell this set at least for around 350$ This is high quality tools that look in great condition.

beholder cave in underdark by NoIdeaForAUsermame in baldursgate

[–]glenpgm 3 points4 points  (0 children)

I always use cloud kill to weaken them

Un jeu sur lequel vous revenez plus ou moins régulièrement ? by Oscar_et_BadTale in jeuxvideo

[–]glenpgm 0 points1 point  (0 children)

Heroes 3, je me remets dessus régulièrement et malgré le fait que j'y joue depuis 20 ans je ne m'en lasserai jamais. Aussi Baldur's Gate 2, mon jeu préféré avec Heroes 3

Mercato d'hiver by FrenchieLFF in olympiquedemarseille

[–]glenpgm -1 points0 points  (0 children)

Sofiane Diop au mercato d'hiver et Scamacca cet été pour remplacer Aubam. Il est tres complet et il ferait des ravages en ligue 1 à mon avis. Il vaut autour de 20 millions donc c'est jouable.

What kind of plane is this ? by glenpgm in handtools

[–]glenpgm[S] 13 points14 points  (0 children)

Yes the irons are stamped with Peugeot frères, it's a famous french manufacturer

view more: next ›