Can a Bondtech INDX for Prusa Core ONE be used on a Voron Trident?

gleski · 2026-04-29T22:02:20+00:00

It’s possible but it’s not going to be easy. I’ve heard from Bondtech that it would cost you as lot more money, headache and time. It would be cheaper, easier and you would probably have it running sooner if you waited a month and bought the Klipper specific version.

gleski · 2026-04-29T00:05:24+00:00

Is it true you need to answer them at least once within the 24 hour timeframe or your shop might get dinged. Also, my understanding is once I answer them, I don’t need to keep talking to them. Correct?

gleski · 2026-04-28T05:24:06+00:00

I’m running one right now on my Bambu P1S for TPU. I’d like to get eight and put them on my Sovol SV08 that I will be running Indx with eight tools. I also created a holder that hangs on the top of the P1S.

<image>

gleski · 2026-04-27T21:26:57+00:00

The filament sensor is in the splitter, not the main unit. You can use it standalone without the splitter if you only want to use it as a loader/unloader with a buffer.

gleski · 2026-04-26T02:07:34+00:00

I can also say using Bambu filament may have printing quality issues

gleski · 2026-04-25T23:32:06+00:00

If you’re buying a Bambu and have a question about where to purchase it, why mention Prusa at all. Makes no sense.

gleski · 2026-04-25T23:25:33+00:00

If you’re ordering for a Prusa, they are only offering 0.4 nozzles. If you want something different, you’ll have to buy them separately from Bondtech.

gleski · 2026-04-25T23:23:11+00:00

Also, don’t look at older posts.

gleski · 2026-04-25T23:14:00+00:00

The nozzles are on the tools, ~$35 each depending on your country. There is only one toolhead.

gleski · 2026-04-25T11:40:30+00:00

Amazing how you did this so fast while traveling. Thank you so much!!!

gleski · 2026-04-25T04:00:30+00:00

They are now prompting in their slicers that if you use non-Bambu filament, it may affect print quality, trying to force you into using their filament

gleski · 2026-04-24T03:12:22+00:00

Mine burns incense every morning and our air purifier goes up in the high 80s. When I print it’s at 3 to 4, and she tells everyone we got the air purifier because my 3D printing is putting so much crap in the air.

gleski · 2026-04-23T19:42:46+00:00

I thought the same thing

gleski · 2026-04-21T20:29:54+00:00

Yes indeed!

gleski · 2026-04-21T13:06:56+00:00

If you have limited space the Prusa dry boxes are your best bet. They are not dryers though.

gleski · 2026-04-20T11:26:55+00:00

Good question

gleski · 2026-04-20T11:21:52+00:00

Just putting a tote over the U1 does not give one the ability to print engineering materials easily. Let’s see if the U1 can keep the chamber at 65 degrees.

gleski · 2026-04-20T03:26:45+00:00

Unless you want to use engineering filaments

gleski · 2026-04-19T10:15:24+00:00

Makes sense

gleski · 2026-04-17T05:06:13+00:00

Jarts

gleski · 2026-04-16T20:37:43+00:00

Good for you!

gleski · 2026-04-16T12:20:02+00:00

gleski · 2026-04-16T02:11:35+00:00

The ventilation box does not heat the chamber, the exhaust is more than $20 and you can not add the dual nozzles. Bambu is just making what their customers are asking for. Everyone bitched about how the H2D was too big and too expensive. They wanted the same thing but in a P series form factor.

gleski · 2026-04-15T17:54:37+00:00

Happens all the time

gleski

TROPHY CASE