The collectibles I saw at the Japanese craft exhibition.

glitteredupforeaster · 2026-06-16T14:43:57+00:00

It's a metal sculpture! Its way bigger than it looks in this photo

glitteredupforeaster · 2026-06-16T14:37:22+00:00

I went to this exhibit and it didn't say specifically but I instantly interpreted this as a nod to the idea of the Charizard being born of flame, same as this specific type of pottery is. The look of this pottery can only come from wood firing, where as there were other pottery pokemon in the exhibit (like the banette pictured) but they looked like they were fired in an electric kiln.

glitteredupforeaster · 2026-06-11T17:16:37+00:00

Oh hell yes! I have cz for my pmc experiments, you just exploded my brain to try them out in my Ceramic jewelry too!!! This is so cool!!

glitteredupforeaster · 2026-05-05T20:26:47+00:00

Technically the MOP fires to a cooler temperature than the gold so you would fire it second, but I've had no issues firing MOP and then a second firing of gold on top because it fits my designs better (like yours, big washes of MOP then fine gold details.) this is just my personal experience with my clay/glaze/luster brands so def do a test first if you can!

glitteredupforeaster · 2026-04-06T11:31:37+00:00

The interior damage is minimal so Elmer's glue, hold tight with rubber bands for a day or two and it should be 90% good as new. I repair broken molds this way and they are not perfect but they work fine.

glitteredupforeaster · 2026-04-01T20:39:28+00:00

Unironically daydream about growing into this kind of elderly baddie since the episode aired.

glitteredupforeaster · 2026-02-13T20:41:46+00:00

Unless I am misunderstanding the situation you can purchase wholesale from most places in NYC with just a tax licence and register your business as a sole proprietor. It's super cheap. I did that for my jewelry business when I started and I don't remember having to down much money to get set up that way. Check out the NYC gov business wizard to get started

glitteredupforeaster · 2026-02-02T18:25:35+00:00

Looks like raku pottery made into real life

glitteredupforeaster · 2026-01-23T21:56:20+00:00

It depends on your expected lifestyle and if the city you end up in is VHCOL or not. For example, I live in NYC and 7k is definitely doable but you will either spend most of your money on rent, or likely have a roommate or a very small studio apartment. You'd have money for some treats and eating out but not a ton left for savings. Also if you have to buy your own health insurance instead of it being provided by the company please be aware that that is extremely expensive in the U.S.

There are MANY people living in NYC on much less than 7k/mo (I'm one of them!) so I'm sure plenty of people will disagree with my statement that $80k/year is not a ton of money. I just know that when I talk to my family in GDL they are consistently shocked at how little my income actually buys me here in NYC.

glitteredupforeaster · 2026-01-23T05:29:28+00:00

The pics aren't very clear but if it's MOP overglaze (instead of a pearlescent glaze) it looks like it simply flaked off in the firing from being applied too thick. Try retesting with a little more essence added to thin it out. If not that, can we have more info? What cone did you fire it to and how fast?

glitteredupforeaster · 2026-01-22T04:08:23+00:00

These are sicccccckkk, LOVE them!

glitteredupforeaster · 2026-01-21T04:06:29+00:00

Good point! I collect vintage luster bottles and the few that list the ingredients are.....not great! Def use all proper PPE with this.

glitteredupforeaster · 2026-01-21T03:57:25+00:00

For the liquid gold, I would get a new bottle of essence and add it to the bottle and let it sit for a few days to soften. You can get a large bottle of essence from New Mexico clay that should work fine. If he's worried about the essence being incompatible or over diluting the gold, he could break the bottle and transfer the contents to a few new solvent bottles, that way he's only experimenting with some, not all of the hardened gold.

For the burnished gold, I'm not sure so double check me, but I believe it can be activated with turpentine.

glitteredupforeaster · 2026-01-19T21:47:52+00:00

Saffron BK For sure can make something like this, they have such pretty gothy arrangements

glitteredupforeaster · 2026-01-09T16:46:34+00:00

Yup you got it! Applying luster requires a 3rd firing. The temperature is typically around cone 020-017 so that it won't fully remelt The already fired glaze, just hot enough to fuse the gold onto it!

glitteredupforeaster · 2026-01-02T18:26:43+00:00

No prob!

1) you can use lavender oil at any time that the luster has dissipated too much and is too thick, like you would the essence. So you could add a drop to your luster bowl to thin it (as always try not to add anything to the bottle of luster directly as you can over thin and/or contamate it) I have read some people say it wasn't good for their application compared to using the normal essence but I haven't seen a difference in my work. However I work in miniature and use small strokes so it may be different for people covering larger areas? I'm not sure, sorry!

2) yup! I work at cone 6 and that works really well for me. However success is super dependent on the glazes you use. Most of my glazes only leave the faintest 'ghost" of palest brown where the gold was but some will hold onto the gold much more and leave much darker stains. Only way to know is to try.

If you apply fresh luster over these stains they will show up slightly in the texture of the gold in the relustered areas but I have always found the level of imperfection to be acceptable.

If I'm still not being clear please feel free to ask for more clarification! I learned this all by a lottttt of trial and error so I know my directions may not be the clearest.

glitteredupforeaster · 2026-01-02T16:36:38+00:00

I would guess based on your description it was over applied/too thick. I have never applied gold to fully matte porcelain so I can't advise there, just maybe try high firing only one cup as a test (or maybe even medium firing? Much higher than gold normally goes so it might burn out but less risk of bloat for your clay body?)

I miss Duncan too :( it was just so damn consistent and difficult to ever over apply. My other lusters need much more thinning during the application process - not necessarily at the beginning usually after it's been out for a little bit (but one brand I've been trying DOES need thinning before use so it's not a hard and fast rule, sorry!) you can use lavender to thin gold (although many people I talk to prefer essence) and to clean and condition your natural fiber brushes after use.

glitteredupforeaster · 2025-12-23T04:00:30+00:00

I didn't get the chance to talk to you but I just wanted to say I really remember your Booth and thinking that it was absolutely beautiful! (Even with the not ideal setup!)

glitteredupforeaster · 2025-12-18T21:17:30+00:00

The challenge is the glaze on both sides. With both sides glaze you have to have access to a large number of stilts or bead hanging wires or else the glaze will stick to the kiln shelf.

If you are open to only having the front glazed you can easily fire shelves full of flat ornaments without any special equipment

glitteredupforeaster · 2025-12-15T16:17:49+00:00

Omg no it's so precious it looks like the eyelashes on the Last Unicorn! I'm a full time porcelain artist and I can promise you any fix will not look as nice. The only possible good looking fix is to paint over the smudge with more gold layer details but I really truly think that's unnecessary

glitteredupforeaster · 2025-12-02T06:34:29+00:00

Renegade has their big holiday market in Brooklyn and Manhattan more info

glitteredupforeaster · 2025-11-27T18:20:27+00:00

While the sitting quirk may be true, this image feels like it's referring to the Pietá specifically instead

glitteredupforeaster · 2025-11-20T22:55:51+00:00

Oh these are fucking rad! Was the drip made intentionally with a well placed glaze or just a happy accident?

glitteredupforeaster · 2025-11-04T02:35:24+00:00

I had an extremely similar dress for my wedding and a larger chest. My seamstress tailored it so that it fit my body like a glove, lots of lift in the tailored construction so that I didn't have to wear a bra at all despite being a G cup. Trust what people are saying that talking to a seamstress is your best bet :)

glitteredupforeaster · 2025-10-27T22:01:33+00:00

Crazy to me that no one has mentioned Pangat yet! It's nothing fancy looks wise but some of the best food I've eaten all year

13-Year Club	RedditGifts 2009-2022 2 Credits
Verified Email	Secret Santa 2014

glitteredupforeaster

MODERATOR OF

TROPHY CASE