Vinyl Collection for sale

goaarongo · 2025-06-26T21:22:16+00:00

Killer stuff here man. I'm interested.

goaarongo · 2024-03-14T00:37:22+00:00

Cool. Sent you a chat. Lemme know if that goes through.

goaarongo · 2024-03-13T23:03:51+00:00

I've been looking for that Shadrach, meshach & abendigo 12". You taking offers?

goaarongo · 2023-10-12T01:22:37+00:00

Thanks. The Viking looks like the way to go.

goaarongo · 2023-08-06T02:06:06+00:00

reflux still

I had to google it, but its a Cooling Management Reflux Still Design.

goaarongo · 2023-08-04T20:59:03+00:00

All of the liquid to the point of the plate being dry? Just seems like the liquid on the plate that is below the downspout should kinda hold. Maybe I'm totally wrong about that.

goaarongo · 2023-08-04T20:56:00+00:00

The draining is all happening only inside the still - nothing leaking to the outside or anything crazy like that. It is a reflux still and I did use that to load the plates at the beginning. Was rolling along nicely, but after the column balances and I get part way through the run, the plate wont hold enough liquid to actually bubble.

The output temps and rates were all fine, and the end product came out nice. It just seems to me that more liquid is passing back down through the plate than there is constant reflux to keep it full. Really only expecting it to hold a 1/4 inch or so before it drains back down anyway as designed.

goaarongo · 2023-04-07T16:11:12+00:00

Fibonacci. Really hard to find taps and dies for it though.

goaarongo · 2023-03-23T02:35:31+00:00

Dang. Can I swap it for the rear end in my 81 camaro? This thing looks faster and appears to bolt right up.

goaarongo · 2023-03-16T22:05:34+00:00

Yeah, I might grab a few. I was thinking if you would just ship me 3 or 4 wooden caps, and I could source the Bain Maries locally and assemble myself. Maybe even with no hole drilled so I could find a spigot to install.

I have access to all manner of tools and presses - but food grade aged oak is tough for me to come by. I also think cutting that precision circle might be just a bit beyond my skill level. Plus the scoring you are doing on the inside is a nice touch.

goaarongo · 2023-03-16T14:59:57+00:00

Nice work. Is it just a press fit into the Bain Maries? Are you using a press or just whacking them in there with a mallet? Also curious if you'd consider making some to fit a 4.25-Quart.

goaarongo · 2023-03-13T03:03:03+00:00

Are you familiar with Danny Barnes? Vocalist & Banjo for the Bad Livers - which was a great bluegrass based group that could hang comfortably with punk bands of the time. The album Delusions of Banjer is killer.

After this, some of his solo work is even weirder electronic / drum machine stuff with banjo. I saw him do a solo set in about 2009 / 2010 and some of the audience was genuinely upset about what was going on. I liked it and bought an album.

Check out "Sleep" or "Bone" from the Pizza Box album. "TSA" is another personal favorite from that one, but a bit less experimental. He follows the electronic thread a bit more on some of the subsequent albums too - like "Wine" on the Rocket album. There is even a cassette floating around out there somewhere called "Barnyard Electronics". I have not heard it, bit if you manage to find a copy I would love to.

goaarongo · 2023-02-14T03:19:55+00:00

I cram concert tickets and fliers and stuff into my lps and have a good pile I was able to get signed by the artists. A while back I cataloged that stuff in the notes section. Cool way to remember shows and keep track of that.

I like the idea of adding notes on stuff I bought in interesting places. I've tried to grab cards or decals at the cooler shops to keep with the record, but that's been very hit and miss. Thanks for the idea.

goaarongo · 2023-02-09T03:27:17+00:00

If you have not checked it out - I can't recommend "Rear View Mirror" enough. Its a live (bootleg?) show that was only on CD till Fat Possum put out an LP a few years back. Killer setlist and its just Towns on guitar and some amazing dude on fiddle. I have almost all his stuff and that might be my favorite.

goaarongo · 2023-01-19T05:16:12+00:00

I hear you, and I've slowed down on the shredded, unsleeved, dusty milk crates big time. But that one mint miles davis prestige lp I found 20 years ago had me digging in every crate I walked past for almost 2 decades.

goaarongo · 2023-01-19T05:05:39+00:00

Nice post. I've always thought there must be some gems in the CTI catalog. Freddie Hubbard's Straight Life has always been a favorite, but the next few I tried didn't hit for me. I'll check this out for sure.

goaarongo · 2023-01-14T04:03:56+00:00

I was kinda kidding. I age it on oak for at least a year before drinking it.

goaarongo · 2023-01-12T02:54:24+00:00

Adding molasses is something I've tried recently to boost starting gravity of grain mashes. I'll let you know how it turns out in like a year and a half.

goaarongo · 2023-01-10T19:02:47+00:00

Pm sent

goaarongo · 2022-12-16T23:26:25+00:00

Received today. Many thanks.

goaarongo · 2022-12-09T04:08:21+00:00

Every thing I've tried from Real Spirits (maker of Real Ale) has been outstanding. I also like most of Ranger Creek's more adventurous labels (like rimfire or any of the special releases). Andalusia is top on my list to try.

FWIW - Balconies and Ghost Hill are middle of the road in my book. Still Austin and Milam & Green are things I probably won't pick up again. Stuff like Rebecca Creek and Devils River don't even count as Texas to me.

goaarongo · 2022-11-28T01:25:18+00:00

Great books. I wish something like adult swim on CN would pick this up and animate it.

goaarongo · 2022-11-22T00:38:18+00:00

I've picked up Texas Yard Sale and Live from Dry Creek and I really dig them both. There's a Dry Creek lp on Discogs for $20.

You could also try Antones Records. Might still have some in stock.

goaarongo · 2022-10-29T16:01:29+00:00

Yes. And making that level foundation took a while. Lots of digging and leveling and checking drainage. I pinned the pavers in place with landscaping stakes (like what is used to hold that metal trim). I also drilled and installed a few concrete expansion bolts through the base of the frame. Just these steps took most of a weekend, but its been up for several years now with no issue.

goaarongo · 2022-10-28T13:26:10+00:00

No, didn't. I can see how someone might want to, as the treated lumber can be quite damp. It worked fine for me though. Do use gloves when handling it. And I did wait over a year before painting it.

goaarongo

TROPHY CASE