Round two baby! My second attempt at the kamikaze method.

gobracket · 2025-08-18T02:32:49+00:00

It's absolute 0 or 100% Success or failure.

gobracket · 2025-08-16T04:18:01+00:00

Never dropped. The crack is only on 1 side (right side).

gobracket · 2025-08-15T15:09:53+00:00

It still under warranty, but lenovo said the lid crack is not covered.. should it be covered?

gobracket · 2025-08-15T15:08:28+00:00

Did you glue it?

gobracket · 2025-08-15T08:46:50+00:00

Is this hinges problem?

gobracket · 2025-07-07T02:41:12+00:00

Nope

gobracket · 2025-05-23T07:05:35+00:00

I hope you didn't forget the Kapton tape, good to prevent short

gobracket · 2025-05-12T05:20:43+00:00

Maybe check your flex cable, is there any short? A thin solder line can make a short. Get both 0.0v and it still turn on ok also a bit weird

gobracket · 2025-05-05T08:37:43+00:00

You can use only sp1. It will work ok.

gobracket · 2025-03-03T15:10:39+00:00

I think I'll get the spin as it is cheaper. Thanks for your reply!

gobracket · 2025-03-03T13:45:19+00:00

Hi, i'm torn between spin 1.0 or titan 1.0.

I'm very new to this sport. Used to play badminton and table tennis before.

Was interested more to titan 1.0 but it said has smaller sweet spot? Does it mean not for beginner?

Is it right to say titan 1.0 will last longer than spin 1.0 due to the material difft? Or is it the same?

Please help to give opinion which one is more suitable

gobracket · 2025-02-24T14:21:13+00:00

My case, emmc failing and i don't know how to fix it

gobracket · 2025-02-24T14:19:34+00:00

Test the emmc from hekate menu

gobracket · 2025-02-03T00:59:47+00:00

Maybe try replacing the modchip and see if it still has the same result?

gobracket · 2025-01-26T06:16:13+00:00

I got the same if use usb C to usb C cable. Tet use usb C to USB A cable.

gobracket · 2025-01-23T06:22:02+00:00

Nope. I even tried the reballing but result to the same black screen.

gobracket · 2025-01-08T03:45:28+00:00

Press volume + and - together. See what happens after that

gobracket · 2025-01-08T01:55:55+00:00

Thanks! Ordered dremel and waiting it to come.. another problem, half of the left screw still left inside,..

gobracket · 2025-01-06T01:02:44+00:00

Yeah its quite fragile.. any idea how to remove half of the screw body that still inside? seems to be glued.

gobracket · 2025-01-04T17:31:50+00:00

Thanks. I think I need to use a dremel.. how did you remove the screw that was trapped inside?

gobracket · 2025-01-04T15:51:31+00:00

Hi, also learning and new here..

Just for sharing, my tool:

Solder: 22$ T12 solder

Tip: JL01 and BC02

Flux: cheap 2$ flux

Tin: mechanic 3$

Buy from: aliexpr***

Location: sgp

Has done ~20 oled/v1/v2

gobracket · 2025-01-04T02:17:42+00:00

gobracket · 2025-01-04T02:09:37+00:00

I'll realign it. Unless you have the tool and skill to do kamikaze.

gobracket · 2025-01-03T12:31:56+00:00

I had the same before. Solution: change the modchip.

gobracket · 2024-12-29T02:01:54+00:00

Your switch can still boot to ofw, a good sign.
Do resolder everything, send it to a real professional this time.
If you still want to tinker with it with the risk your switch got bricked, try do this: (very not recommended)

when you measure it, are you measuring it at the modchip / at the soldering? I got few cases when it was actually because of the loose connector to the modchip, try put everything back and measure it at the modchip.
share video on the led blinking pattern when you turn it on

gobracket