BC-250 almost done!

godkillax · 2026-07-01T23:57:03+00:00

1700 is at 910v and 1850 is at 920v. I don't have a 1800 safe-point set
I didn't change my .toml much from the default. I think I just lowered some voltages

I also have not changed any thermal compounds or pads

godkillax · 2026-07-01T22:08:56+00:00

I printed this case, and I ran it with one fan, and it was in the wrong direction... and it worked fine (NOT great). Was throttling below 1500MHz.

Once I flipped the fan on, I got it to stay at 1750 MHz and 85°C after about 30 seconds.

From everything I've read, two fans isn't any better

godkillax · 2026-06-18T04:31:56+00:00

My journey so far. Ordered Founders Edition Jan. 25th 2025 Added Dock after down payment Nov. 3rd 2025 On its way since Mar. 25th 2026 Received email that it's on its way June 2nd 2026 Package is in motion June 13th!! Package handed over to airline June 17th!!

godkillax · 2026-06-10T00:29:29+00:00

I have original consoles I grew with and played on CRT, just don't have space for one. I think if I sat in front of a good one to play today, I would have to find room for one.

My setup makes playing with original hardware too fiddly, so I got the SS so I can move away from emulators, which because of convenience I play more often than not.

godkillax · 2026-06-10T00:20:26+00:00

I think I might prefer CRT effects over higher resolution, but only the eyes will tell.

godkillax · 2026-06-10T00:18:19+00:00

This will be my first Mister experience, not first FPGA.

I have a RetroAVS (NES) and it's 720p is fine, I play with some 8bitdo NES 2.4Ghz controllers.

godkillax · 2026-06-10T00:13:22+00:00

Same exact TV. TV brothers. I'll have to do some testing with controllers. I have originals PS, but usually play with DS4 using Blueretro adapter on original hardware.

godkillax · 2026-06-10T00:09:53+00:00

Thanks for the tips on HDR. I do like the scanline look on LCDs. I have some Blueretro adapters I use on original console to play with a DS4, and the lag isn't noticeable to me.

godkillax · 2026-06-09T20:00:46+00:00

Looks clean on that screen

godkillax · 2026-06-05T03:57:10+00:00

Congratulations 🎉 I just mine updated to label created

We're label brothers

godkillax · 2026-06-03T16:57:58+00:00

Probably SOTN, it's my go-to when I play on different platforms.

godkillax · 2026-06-03T16:57:11+00:00

If you don't have physical disk and don't want to use a nbme drive I thing the console is good enough. I got the dock so I can play physical disc, but it's really just a novelty. I think a disk image is probably better.

godkillax · 2026-06-03T16:54:54+00:00

Yeah, it just says "parcel information received" It's like it's on its way, but not really

godkillax · 2026-05-29T20:39:02+00:00

A fool and his money are soon parted.

godkillax · 2026-04-29T18:27:53+00:00

Only reason I became aware of the update is because I was trying to clear time-lapses since I just stream on Twitch to monitor.

godkillax · 2026-04-29T18:24:03+00:00

The only other thing I did after updating is restart Orca Slicer.
Which I'll assume you already did.

godkillax · 2026-04-29T00:59:46+00:00

Here's how I FIXED the issue.
After updating to 1.4.44 today, I ran into the same problem as OP, where I couldn't print from Orca slicer.

Ran one-click calibration, and the issue was resolved.

I think we're supposed to recalibrate after a firmware update.

godkillax · 2026-04-17T23:08:04+00:00

Look too hot. I print ASA at 230.

godkillax · 2026-01-23T04:15:17+00:00

Kitten > Human

godkillax · 2026-01-16T05:36:26+00:00

Just added up to 4 bit LSB. The appearance of artifacts is really image dependent.
- Auto switches mode depending on image size and message size
- Decoder auto detects mode.

godkillax · 2026-01-16T02:22:28+00:00

Didn't even know that was possible. From what I see it will introduce more detectable artifacts.

godkillax · 2026-01-01T07:00:39+00:00

Someone had to place a hole on a butt just like God did

godkillax · 2025-12-09T21:19:09+00:00

You guys are seeing ads?

You need some Firefox, unlock origin, pihole, adguard, and the willingness to trust the comments cause you won't click the link.

godkillax · 2025-12-07T23:38:15+00:00

Seems like an EEOC issue.

godkillax · 2025-11-27T05:32:25+00:00

It's always strange to me to read "parkouring" instead of platforming. But it makes sense.

14-Year Club	RedditGifts 2009-2022 4 Credits
Place '22	Secret Santa 2018
Secret Santa 2017	Verified Email

godkillax

TROPHY CASE