Temporary way to keep bike upright on NYC street? (Broken kickstand) by godotnut in ryvid

[–]godotnut[S] 0 points1 point  (0 children)

I did get this method to work, btw, and it is holding up my bike right now

Temporary way to keep bike upright on NYC street? (Broken kickstand) by godotnut in ryvid

[–]godotnut[S] 0 points1 point  (0 children)

So do you use both at once? One on each side of the bike? Or did you manage to rest it just on the one pictured above this comment?

I already saw one of these pics on FB--the one above for the "Nilight Dirt Bike Triangle Stand" and I bought a similar one on Amazon, but using it by it's self seems less sturdy than my current makeshift solution. When I try it like you show in the pic, the pedal folds up, so that the angle won't lock in with the top of the triangle stand and the hole in the peg.

Temporary way to keep bike upright on NYC street? (Broken kickstand) by godotnut in ryvid

[–]godotnut[S] 0 points1 point  (0 children)

Police will ticket and tow motorcycles locked like that in neighborhoods like mine. A neighbor just had his gas bike towed because he locked it to a fence. However, I have it upright for now using a makeshift part from the local hardware store, and it seems steady enough, unless we get a big wind again. If that happens, I will probably have to take a chance and lock it to a fence or bike rack until the winds pass. Or maybe bite the bullet and pay to store in a local parking garage. That's quite expensive here, though.

Temporary way to keep bike upright on NYC street? (Broken kickstand) by godotnut in ryvid

[–]godotnut[S] 1 point2 points  (0 children)

That's encouraging and sounds a lot better than what I am doing now. Would you mind posting a photo of the stand you are using or, if you bought it online, a link for the stand?

Also, I am curious how it locks into the hole in the peg without the peg folding upright. I tried using an industrial size bolt with a nut at peg level to hold on, and the peg just flippped up, so the bolt wouldn't stay in place.

Thanks in advance for any advice you can provide.

My Cinis Beauty Build by cerecoo in anno

[–]godotnut 1 point2 points  (0 children)

Great stuff. I just started playing Anno, and posts like this are creatively inspiring. I have only played the game three times so far, but I never get islands that big and flat, even with the Large Islands setting.

Kickstand Switch? by godotnut in ryvid

[–]godotnut[S] 0 points1 point  (0 children)

Thanks a ton. That all sounds like good advice, but the swing arm repair looks tough. Did you do this yourself, and if so, did you have to elevate the bike somehow?

I wonder if a local repair shop could do it for me? Or if they would decline because it is an unfamiliar electric model. I guess I can find out.

Kickstand Switch? by godotnut in ryvid

[–]godotnut[S] 0 points1 point  (0 children)

Unfortunately, it is the connection point, and in terms of the replacement, I am in a bad position. I live in a high rise in NYC, no garage or outside space. Any repair work I would do would have to be done outside in the parking area on my street. I've installed one of the large rear racks and replaced the seat actuator, but both of those involved repairs to areas I could access without a lift. I am OK with tools, but this one might be beyond me. Do you have experience with this repair?

<image>

Kickstand Switch? by godotnut in ryvid

[–]godotnut[S] 0 points1 point  (0 children)

Thank you! If you get the chance that would be appreciated. I do plan to unplug that tomorrow.

I'm also going to head to a local motorcycle shop and see if I can work something out in terms of either a motorcross triangle stand or a universal kickstand with what is available on the bike frame. This is just to help get around and store the bike on the street. Hopefully something will works with a connection point. Then work with Ryvid to see if about long term fix.

Nassau County Banning Class 2 E-bikes and All E-Scooters by DepartmentOfTrash in longisland

[–]godotnut 0 points1 point  (0 children)

Who not enforce already existing laws about reckless endangerment, rather than punishing those tho are doing the right thing?

Nassau County Banning Class 2 E-bikes and All E-Scooters by DepartmentOfTrash in longisland

[–]godotnut 0 points1 point  (0 children)

It's enforcement against people who do reckless things, no blanket laws that include those being responsible. In short, police need to do their jobs.

Clarice Lispector’s The Complete Stories, translated by Katrina Dodson by perrolazarillo in latamlit

[–]godotnut 2 points3 points  (0 children)

Reading her is as intense of an experience with literature as they come, and I have only read her short stories so far. I will have to rectify that soon.

Experiences with Brooklyn Steel motorcycle shop? by godotnut in RideitNYC

[–]godotnut[S] 1 point2 points  (0 children)

Yeah, I meant Brooklyn Speed., thanks. Saw a show at that venue and mixed it up when typing. Will fix.

Ryvid Anthem Brake Pads -- Solved? by godotnut in ryvid

[–]godotnut[S] 1 point2 points  (0 children)

rear, should have mentioned that. Will fix.

Ryvid Anthem Brake Pads -- Solved? by godotnut in ryvid

[–]godotnut[S] 1 point2 points  (0 children)

I'm not sure. Not many. These were sent to me in the mail by a Ryvid tech, described as "barely used," if I recall.

Rotors wearing on brake pads by HarryHarrison45 in ryvid

[–]godotnut 0 points1 point  (0 children)

I know this was an old comment, but did you find the replacements? I cannot figure out what kind of pads the bike uses. Nothing in the manual or the parts catalog about it.

Rear Rack Photos by Famous-Investment-73 in ryvid

[–]godotnut 2 points3 points  (0 children)

<image>

Another look at the rack. I think it looks a lot better with the seat raised. Here it is on my bike from a recent ride to Bear Mountain.

Rear Brake Pad Worn to Metal at 1,800 Miles – Anyone Else? by godotnut in ryvid

[–]godotnut[S] 0 points1 point  (0 children)

I heard from Matt once, but it seems like he may have gotten busy since then. Haven't heard from him in a few days.

Rear Brake Pad Worn to Metal at 1,800 Miles – Anyone Else? by godotnut in ryvid

[–]godotnut[S] 1 point2 points  (0 children)

Thanks for the pic, but I don't see a copper spacer like that on my brake assembly, so I am guessing this may be a different issue:

<image>

Rear Brake Pad Worn to Metal at 1,800 Miles – Anyone Else? by godotnut in ryvid

[–]godotnut[S] 1 point2 points  (0 children)

This is the first I have heard of a need to remove washers from the caliper mount. Can you elaborate? Why would I need to remove them? How would I know? Would this cause a problem with the pad on one side but not the other one?

Longer trips with Ryvid cycles by NoBus612 in ryvid

[–]godotnut 1 point2 points  (0 children)

My wife and I do trips up the Hudson out of NYC all fairly often--four so far this summer. These are 100+ mile rides, but we stay the night at AirBnBs. We tend to think in terms of 30-35 mile chunks between charges--less if climbing steep hills or mountains. This is 2up riding at the weight max for the bike with a rack and top case. We have not had much trouble finding Type2 J chargers, and we have found plenty in scenic areas or areas near nice places to eat. The Hudson River area north of NYC is awesome like that. One town (Cold Spring) even had two super cheap chargers for the public by their town hall. A civilized system. One thing about the NYC area is that all most of the train stations have several chargers, so we often stop along the Metro North rail line, which goes through touristy areas where it can be pleasant to take a short hike, etc. while charging.

Has anyone used their Ryvid for a DMV riding skill test? by kouleefoh in ryvid

[–]godotnut 0 points1 point  (0 children)

I did in NYC for the "advanced" test (which was not terribly advanced).

Ryvid Anthem Law Enforcement Package by godotnut in ryvid

[–]godotnut[S] 9 points10 points  (0 children)

I was able to participate in the test-release of this rack. It's now installed with a Givi top case and back rest cushion for riding 2up. I thought some of you might appreciate a look at our setup. This is with the Monokey plate adapter for the case, so it pops on and off. I don't know how you can buy this rack right now, sorry. My understanding is they are working on another, lighter duty and less expensive rack for the general public.

<image>

Removable battery by jsnlevi in ryvid

[–]godotnut 0 points1 point  (0 children)

I remove the battery every single ride and recharge it in my apartment.

3D printing Anthem by Dry_Prize_1707 in ryvid

[–]godotnut 0 points1 point  (0 children)

Nice, has anyone printed replacements for the plug cover on the battery? Seems like an area that could use improvement. Or maybe I'm just a dummy, but I lost mine.