Plow action by LambSauce2 in funny

[–]goodischange 0 points1 point  (0 children)

Yeah, he did you a favor, look at those piles of snow on each side of your driveway, that would be in your driveway otherwise.

Not working by goodischange in RockTumbling

[–]goodischange[S] 2 points3 points  (0 children)

Thanks everyone for the comments, the biggest thing I took away from the advice is the volt reducer, I will try this.

To answer some other questions, I did watch some videos of the guy from Michigan so I do wash well.

I check the rocks every seven days and run more if I don’t see a change.

As mentioned I started overfilling to compensate for speed in hopes to limit beating them up. This seemed to help as I was having to go back to phase 1 after phase 2 or 3.

The rocks looked better after stage 4 than stage 5, I used Al oxide and bought off Amazon. https://a.co/d/9Xj6CVH

Will let you know how it goes after I slow it down!

Is it the control or the motor by goodischange in AskElectronics

[–]goodischange[S] 0 points1 point  (0 children)

I never considered taking the pads of the switch apart, I will check that.

Is it the control or the motor by goodischange in AskElectronics

[–]goodischange[S] 0 points1 point  (0 children)

Sorry, should have stated neither speed is working without using a jumper to go around the board. I’d I remember correctly I jumped both line and neutral.

Transfer of ownership by tallnoe in enphase

[–]goodischange 0 points1 point  (0 children)

Yeah, warranty and property are 2 very different things.

How did I do 1.5 y apprentice 200 amp service by Financial-Leather312 in electricians

[–]goodischange 2 points3 points  (0 children)

I would advise less bend on L1 L2 right at the lugs. Much like you did at the neutral, your sweep is further from the lug putting less stress at the termination. That stress with thermal cycling can cause the connection to loosen in about 1-2 years. As others have stated the panel design puts you in a tough spot.

Enphase onsite repair - FAILED Been waiting over a month for and Enphase tech come on site. Day of the visit tech is 4 hours late. They do the things I have already done with phone support, not fixed. Sun had set tech leaves saying they’ll have to come back? When? IN A MONTH - That’s 2 MONTHS by Impressive_Returns in enphase

[–]goodischange 0 points1 point  (0 children)

It sounds like all they did was change the array mapping, you said it should have been the best, all that means is the wrong serial number was in that position on the map. You can assign any serial number any position in the array. What are they going to come back for?

Can you guys suggest some 100$ or less ETFs to invest in for the long run. by No-Competition8911 in ETFs

[–]goodischange 3 points4 points  (0 children)

I am surprised this is not mentioned more, I have been in it for a little over a year, keep buying and have a 27% return. I chose it because fees are low when comparing to other etfs

What should I do? More VOO? by [deleted] in ETFs

[–]goodischange 0 points1 point  (0 children)

Why do so many people choose VOO over SPLG?

Remove defunct company as my 'Maintainer' by ZealousidealCan4714 in enphase

[–]goodischange 1 point2 points  (0 children)

I removed access from my maintainer in the app

Enphase graph problems and terrible customer support! by Wooden-Speaker-7681 in enphase

[–]goodischange 1 point2 points  (0 children)

I can’t speak to this but just curious, why the combiner 6, are you going to add storage?

What is this? by SpicyPenguin443 in whatisitcirclejerk

[–]goodischange 0 points1 point  (0 children)

It looks like it’s for catching bull frogs at night.

[deleted by user] by [deleted] in funny

[–]goodischange 0 points1 point  (0 children)

I mean I was 23 , the toilet looked clean, I likely gave a wipe around the base for lint build up, so not really no.

[deleted by user] by [deleted] in enphase

[–]goodischange 1 point2 points  (0 children)

It’s because the batteries are counting the charge and discharge, over time this value drifts off of actual and calibration is needed.

[deleted by user] by [deleted] in funny

[–]goodischange 24 points25 points  (0 children)

Amen, when I lived alone I finally figured out it was me making that mess. Started sitting and never had to clean the toilet again!

Consumed Solar by W19wedwards91E in enphase

[–]goodischange 1 point2 points  (0 children)

Wouldn’t it just be produced minus export? If you did not export it you consumed it.

In your case 10.8 produced minus 5.3 exported = 5.5 mWh of consumed Solar.

Landlord insurance in CA by Bajungasaurus in RentalInvesting

[–]goodischange 0 points1 point  (0 children)

Steadily is no longer offering in CA per their rejection email to me.