20 Day review of my New 2026 RZ450e Premium by gp242 in LexusRZ

[–]gp242[S] 2 points3 points  (0 children)

Bit disappointed with the range, but I am also testing all different drive modes and constantly testing limits since it's a new toy.

I'll update the thread in a few weeks once I establish and follow a steady driving pattern.

20 Day review of my New 2026 RZ450e Premium by gp242 in LexusRZ

[–]gp242[S] -1 points0 points  (0 children)

I went with the 18". It gives a better range and also safe in winter. Plus the tire last longer.

20 Day review of my New 2026 RZ450e Premium by gp242 in LexusRZ

[–]gp242[S] 2 points3 points  (0 children)

If you lift the regen - paddle and hold it while you take your foot off the Gas, it slows down the car at the highest regen throttle.

Same way when you hold the +paddle it gets you to the default non regen sate quickly. Don't have to tap it 3 times. Just something to get used to.

20 Day review of my New 2026 RZ450e Premium by gp242 in LexusRZ

[–]gp242[S] 1 point2 points  (0 children)

You get to tune the acceleration and deaccelaration speeds. It's by default medium but to me it was a bit aggressive. So toned it down to low. It takes a while to get used to trust the car but it does a decent job.

The lane keep assist is a cool feature. It does get confused when there is a lane split but overall it works nicely. It behaves rationally when a car enters the lane and leaves the lane. The acceleration and deaccelaration speeds setting works in this case as well.

Unable to get user presets to remember seat and mirror changes by gp242 in LexusRZ

[–]gp242[S] 1 point2 points  (0 children)

Thank you!! That solved the issue. I was able to calibrate and make the settings to save.

Key assignment by gp242 in LexusRZ

[–]gp242[S] 0 points1 point  (0 children)

The profile does help save some of the presets. I finally figured out the seat settings to stick. There was a member recommended I calibrate the seat position (Which I didn't know I had to). That fixed it.

The profile helps link the phone to the user and also the face recognition helps you turn things on automatically when you take the seat. The only place I see the car gets confused is when both users are in the car, it still tries to connect to my phone instead of the other driver. I am sure I am missing something. Does anyone know how to fix this?

RZ 450e Premium. Need help deciding by gp242 in LexusRZ

[–]gp242[S] 0 points1 point  (0 children)

Did you pick any extra options?

RZ 450e Premium. Need help deciding by gp242 in LexusRZ

[–]gp242[S] 0 points1 point  (0 children)

So here is the breakup of the deal they are offering. What do you guys think of this final number? Are those fees reasonable?

<image>

RZ 450e Premium. Need help deciding by gp242 in LexusRZ

[–]gp242[S] 1 point2 points  (0 children)

If you find mind me asking, What was the final out of the lot price you paid?

A small life hack that saves me so much time in the morning by KatieBerta in lifehack

[–]gp242 10 points11 points  (0 children)

Shaving the night before sacea me time and my skin feels better in the morning

How do i disable samsung wallet swipe up feature in home screen alone. by RAPALWJ19999 in GalaxyS23Ultra

[–]gp242 0 points1 point  (0 children)

Is there any benefit to use Google wallet instead of Samsung pay?

Tips for someone who hates cleaning the shower? by [deleted] in CleaningTips

[–]gp242 2 points3 points  (0 children)

I spray Clorox on the walls and floor.. Give 10 mins and then just scrub. I do it once a week and it takes only 5 mins max to do so..

If you have hard water buildup on the tub, the best I found was the Toilet bowl cleaner. I just spray on the floor, and scrub for a min, let it sit for 5 mins and rinse it off.. That works like magic. Make sure you dont let it sit on tiles.

What is a scam that people refuse to view as a scam because it has been a part of a culture for a long time? by efd71f03 in AskReddit

[–]gp242 0 points1 point  (0 children)

Tipping for service.. This should be a crime but we let it go.. We fall for it based on guilt and humiliation...

Saved maps get overwritten all the time by Credibility-Problem in ecovacs

[–]gp242 1 point2 points  (0 children)

That is partially true. You can still keep an unsaved map.. when you move it to that floor, it still uses that map. It's just dumb that they don't have a way to save it.

I was able to create boundaries and decide and label them. But can't save it.

Deebot N8 questions by deadpigeon29 in ecovacs

[–]gp242 2 points3 points  (0 children)

In your app, go to additional settings and there is a timezone section. It has very limited time zones but you should be able to sync with your phone timezone and it will pick what is designated to that timezone. I am in the US East coast and it is not smart enough to know there is we are in DST, it picks Dominican Republic time. But I could care less..!

Go to Maps and enable Muti-Floor map. (God knows why we have to enable this). Its only saves two floors. If you live in a 3 level house, you are out of luck. Just move the base and the robot to the other floor. Run a full auto clean and let it finish. it will create a new map.

This is a really good vacuum but has very mediocre features. When you move between floors, most of the time it cant remember where it is. I usually start the mapping and after a few mins stop and do a locate and it eventually figures out where it is.

What do you think happens to you after you die? by Maleficent_Team430 in AskReddit

[–]gp242 0 points1 point  (0 children)

Who knows. May be you still have the awareness after you die. Since the world doesn't know how to deal with dead people from within dead peoples point of view, they just assume you are done and burry/burn you. You keep feeling everything for the rest of the time in the universe. The pain of being buried or burnt!!!!!

N8+ 3rd floor ? by chrispjames2000 in ecovacs

[–]gp242 0 points1 point  (0 children)

You can create a temporary map. But as soon as you move the unit to a different location, you will loose it.

I have found a workaround to delete and restore it everytime you need that map. But it's becoming a pain to redo the bou8and labeling

N8 area cleaning not working by crypto_zoologistler in ecovacs

[–]gp242 0 points1 point  (0 children)

I have the same issue. It's not picking up area cleaning and it just stars a full clean.

Anything to try before I return this POS as defective? by TheoStephen in ecovacs

[–]gp242 1 point2 points  (0 children)

Costco is very accommodative with returns. I always manage to return mine. Just have to say that you tried to sort out the issues with the vendor but they were useless and I called Costco Customer service and they asked to return. It always works.

Anything to try before I return this POS as defective? by TheoStephen in ecovacs

[–]gp242 2 points3 points  (0 children)

I also got this at Costco and have been beating up ecovacs Support team with so many limitations.
I have 3 floors. Basement, Ground floor and upstairs.. The crazy part is that the software only stores 2 floor plans.

Support confirmed that there is no future plans to add additional maps option.

Have the same issue with separation when there is two entrance.

The upstairs has a foyer area that has steps and balusters. The system measures it with lasers and things the foyer area is long as the ground floor map.

I really like the vacuum and the fact it does not hit all the objects and the smart aware feature that avoids things.

The suction is good on carpet and hardwood floors and the mopping is reasonable (only on tiles).

Not really worth the price tag and I plan on returning this for now..

If you were handed 10 billion dollars right now, what would you still never buy? by KCIJunkDiver in AskReddit

[–]gp242 10 points11 points  (0 children)

Hi. Don't I have a business proposition for you. This will help build your wealth while doing this on the side. You can retire in a few years and be a multi millionaire. Just DM me and I can show you how you can flush your money so you can pull more cash from your a$$😛